• 제목/요약/키워드: Pattern region

검색결과 1,922건 처리시간 0.029초

천공판의 풀비등 열전달 촉진에 대한 연구 (Pool boiling heat transfer enhancement by perforated plates)

  • 김내현
    • 대한기계학회논문집B
    • /
    • 제20권4호
    • /
    • pp.1406-1415
    • /
    • 1996
  • Several recent studies have revealed that boiling heat transfer may be considerably enhanced in a narrow restricted region. In his study, the narrow restricted region was formed by attaching a perforated plate on top of a boiling surface. Through systematic experiments, effects of the hole size, hole pattern, gap width between the perforated plate and the boiling surface were investigated using water or R-113. Results show that perforated plates considerably enhance the boiling of water or R-113. For water, especially, they have outperformed commercial enhanced tubes, which confirms that boiling enhancement mechanism of the perforated plate (thin film evaporation beneath the elongated bubble) is very effective to the boiling of high surface tension liquids such as water. Optimum configuration was found - 3.0 mm hole diameter, 15 mm * 15 mm hole pattern, 0.3 ~ 0.5 mm gap width for water, and 2.0 mm hole diameter, 3.5 mm * 3.5 mm hole pattern, O.5 mm gap width for R-113. A correlation which correlates most of the data within .+-. 30% was also developed.

Effects of Spiral Arms on the Gaseous Features of Barred Spiral Galaxies

  • 김용휘;김웅태
    • 천문학회보
    • /
    • 제36권2호
    • /
    • pp.57.1-57.1
    • /
    • 2011
  • Using high-resolution numerical simulations, we investigate the formation of gaseous substructures and mass inflow rates in barred spiral galaxies in the presence of both bar and spiral potentials. The gaseous medium is assumed to be infinitesimally-thin, isothermal, unmagnetized, and non-self-gravitating. To consider various galactic situations, we vary the pattern speed and strength of spiral arms as well as the black hole mass. We find that spiral arms with pattern speed smaller than that of the bar remove angular momentum from the gas outside corotation which transports to the bar region, making the dust lanes strong and live long. When the arm pattern speed is identical to that of the bar, on the other hand, the gas outside corotation gains angular momentum and thus moves outward, without affecting the bar region. Overall gaseous morphologies in simulations match well with observed IR images of barred spiral galaxies such as NGC 1097, when the arms and bar are in phase at the corotation radius. The presence of spiral arms increases the mass inflow rate as well, making it larger than $0.01M_{\odot}/yr$ when MBH is $4{\times}10^7M_{\odot}$, possibly explaining AGN activities in Seyfert galaxies.

  • PDF

원통형 케이스 내의 동시회전 디스크 내부 유동패턴의 가시화 (Visualization of the Flow Pattern Between Co-rotating Disks in Shroud)

  • 공대위;주원구
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.1661-1665
    • /
    • 2004
  • Hard disk drives (HDD) in computer are used extensively as data storage capacity. The trend in the computer industry to produce smaller disk drives rotating at higher speeds requires an improved understanding of fluid motion in the space between disks. Laser sheet and digital camera was used for 2-dimensional visualization of the unsteady flow between co-rotating disks in air with a cylindrical enclosure (or shroud). Geometric parameters are gap height (H) between disks, and gap distance (G) between disk tip and shroud. The lobe-structured boundary between inner region and outer region was detected by inserted particles, and the number of dominant vortices was determined clearly It is found from flow visualization that the number of vortex cells can be correlated with Reynolds number based on H which is defined as $Re_H={\Omega}RH/v$ ranging from $7.96{\times}10^2$ to $1.43{\times}10^4$, and decreases as the disk speed increases. The lobe pattern by vortex cells is changed to a circular pattern for the wide gap than narrow one.

  • PDF

2단계 iterative Fourier transform 알고리즘을 이용한 위상형 회절무늬소자 설계 (Design of phase-only diffractive pattern elements using a two-stage iterative Fourier transform algorithm)

  • 정필호;조두진
    • 한국광학회지
    • /
    • 제11권1호
    • /
    • pp.47-57
    • /
    • 2000
  • 프란운호퍼 회절에 의하여 임의의 주어진 세기무늬를 발생시키는 연속적인 또는 양자화된 위상형 회절무늬소자를 설계하는데 hybrid input-output 알고리즘과 새로운 Pnoise 알고리즘을 결합.변형한 2단계 iterative Fourier transform 알고리즘을 이용하였다. 두 가지의 $128\times128$ 이진 세기 무늬와 두 가지의 grayscale 세기 무늬에 때하여 기존 알고리즘들과 비교하였는데, 2단계 iterative Fourier transform 알고리즘은 회절효율이 약간 낮지만 신호 대 잡음비와 특히 균일도에 있어서 우수한 결과를 보였다. 알고리즘에서 사용하는 매개변수들과 잡음영역의 크기에 따른 성능의 변화를 살펴보았고, 양자화된 위상소자의 경우 위상층수에 따른 변화도 살펴보았다. 양자화된 위상소자의 경우 세기 무늬보다는 잡음영역의 크기가 성능을 좌우하는 것으로 나타났다.

  • PDF

Analysis of the Caenorhabditis elegans dlk-1 Gene Expression

  • Lee, Bum-Noh;Cho, Nam-Jeong
    • Animal cells and systems
    • /
    • 제9권3호
    • /
    • pp.107-111
    • /
    • 2005
  • C. elegans DLK-1 has been reported to play an important role in synaptogenesis by shaping the structure of presynaptic terminal. In this study, we investigated the expression pattern and regulation of the dlk-1 gene in C. elegans. To determine the expression pattern, we made a dlk-1::gfp fusion construct, named pPDdg1, which consisted of -2.2 kb 5' upstream region, the first exon, the first intron, and a part of the second exon of the dlk-1 gene. By microinjecting this construct into the worm, we observed that the DLK-1::GFP was expressed mainly in neurons. We next examined the regulatory elements of gene expression by deletion analysis of pPDdg1. Removal of a large portion of the 5' upstream region (${\Delta}-361$ to -2246) of the gene had little effect on the expression pattern, whereas deletion of the first intron led to elimination of the DLK-1::GFP expression in most of the neurons. Our results suggest that the first intron of the C. elegans dlk-1 gene contains the regulatory element critical for gene expression.

과냉각을 동반한 순수물의 냉각현상 해석 (Analysis of cooling phenomenon of water with the supercooled)

  • 추미선;윤정인;김재돌
    • 대한기계학회논문집B
    • /
    • 제21권7호
    • /
    • pp.862-872
    • /
    • 1997
  • Ice formation in a horizontal circular cylinder has been studied numerically. From the numerical analysis results, it was found that there were three types of freezing pattern and that freezing phenomenon was affected largely by density inversion and cooling rate. The type of freezing pattern largely depends on the secondary flow which is generated by density inversion. When supercooling energy is released before the development of the secondary flow, the annular ice layer grows. If the energy is released when the secondary flow is considerably developed and the supercooled region is removed to the upper half part of the cylinder, an asymmetric ice layer grows. And if the energy is released after perfect development of the secondary flow, instantaneous dendritic ice formation over the full region occurs. Furthermore, this secondary flow was found to have an effect on heat transfer characteristics. The heat transfer rate becomes small at the instant when the secondary flow is generated, but becomes large with the development of the flow. It's concluded that for the facilitation of heat transfer it is desirable to keep water in liquid phase until the secondary flow is perfectly developed. This study gave an instruction of performance improvement of capsule type ice storage tank.

환경 위성관측자료의 통계분석을 통한 동아시아 대기오염특성 연구 (Analysis of Characteristics of Air Pollution Over Asia with Satellite-derived $NO_2$ and HCHO using Statistical Methods)

  • 백강현;김재환
    • 대기
    • /
    • 제20권4호
    • /
    • pp.495-503
    • /
    • 2010
  • Satellite data have an intrinsic problem due to a number of various physical parameters, which can have a similar effect on measured radiance. Most evaluations of satellite performance have relied on comparisons with limited spatial and temporal resolution of ground-based measurements such as soundings and in-situ measurements. In order to overcome this problem, a new way of satellite data evaluation is suggested with statistical tools such as empirical orthogonal function(EOF), and singular value decomposition(SVD). The EOF analyses with OMI and OMI HCHO over northeast Asia show that the spatial pattern show high correlation with population density. This suggests that human activity is a major source of as well as HCHO over this region. However, this analysis is contradictory to the previous finding with GOME HCHO that biogenic activity is the main driving mechanism(Fu et al., 2007). To verify the source of HCHO over this region, we performed the EOF analyses with vegetation and HCHO distribution. The results showed no coherence in the spatial and temporal pattern between two factors. Rather, the additional SVD analysis between $NO_2$ and HCHO shows consistency in spatial and temporal coherence. This outcome suggests that the anthropogenic emission is the main source of HCHO over the region. We speculate that the previous study appears to be due to low temporal and spatial resolution of GOME measurements or uncertainty in model input data.

가중치 모듈레이터를 이용한 인공 해마 알고리즘 구현 (Implementation of Artificial Hippocampus Algorithm Using Weight Modulator)

  • 추정호;강대성
    • 제어로봇시스템학회논문지
    • /
    • 제13권5호
    • /
    • pp.393-398
    • /
    • 2007
  • In this paper, we propose the development of Artificial Hippocampus Algorithm(AHA) which remodels a principle of brain of hippocampus. Hippocampus takes charge auto-associative memory and controlling functions of long-term or short-term memory strengthening. We organize auto-associative memory based 4 steps system (EC, DG CA3, and CA1) and improve speed of teaming by addition of modulator to long-term memory teaming. In hippocampus system, according to the 3 steps order, information applies statistical deviation on Dentate Gyrus region and is labeled to responsive pattern by adjustment of a good impression. In CA3 region, pattern is reorganized by auto-associative memory. In CA1 region, convergence of connection weight which is used long-term memory is learned fast a by neural network which is applied modulator. To measure performance of Artificial Hippocampus Algorithm, PCA(Principal Component Analysis) and LDA(Linear Discriminants Analysis) are applied to face images which are classified by pose, expression and picture quality. Next, we calculate feature vectors and learn by AHA. Finally, we confirm cognitive rate. The results of experiments, we can compare a proposed method of other methods, and we can confirm that the proposed method is superior to the existing method.

직선채널과 확대채널에서의 액적 내부 유동 가시화 (Flow Visualization of the Flow inside the Droplet Passing through a Straight and a Diverging Channel)

  • 진병주;김영원;유정열
    • 한국가시화정보학회:학술대회논문집
    • /
    • 한국가시화정보학회 2007년도 추계학술대회
    • /
    • pp.71-76
    • /
    • 2007
  • Flow visualization of a droplet passing through a straight channel and a diverging channel has been carried out using micro-PIV. Diverging channel is frequently used in lab-on-a-chip and microfluidic devices, where flow pattern inside the droplet passing is quite different from that through a straight channel. In the present study, we visualized the droplet flow in three different regions. The first region is where the droplet has a wide contact area with the channel wall, the second region is characterized with a narrow contact area and the third region is where droplet is detached from the channel wall. Visualization results show that the internal flow inside the droplet passing through the straight channel moves in the opposite direction to the droplet velocity in the near wall exhibiting complex flow patterns. But in the diverging channel the internal flow inside the droplet moves in the same direction as the droplet velocity due to the shear induced by oil phase flow exhibiting rather simple flow pattern.

  • PDF

Nonlinear Diffusion and Structure Tensor Based Segmentation of Valid Measurement Region from Interference Fringe Patterns on Gear Systems

  • Wang, Xian;Fang, Suping;Zhu, Xindong;Ji, Jing;Yang, Pengcheng;Komori, Masaharu;Kubo, Aizoh
    • Current Optics and Photonics
    • /
    • 제1권6호
    • /
    • pp.587-597
    • /
    • 2017
  • The extraction of the valid measurement region from the interference fringe pattern is a significant step when measuring gear tooth flank form deviation with grazing incidence interferometry, which will affect the measurement accuracy. In order to overcome the drawback of the conventionally used method in which the object image pattern must be captured, an improved segmentation approach is proposed in this paper. The interference fringe patterns feature, which is smoothed by the nonlinear diffusion, would be extracted by the structure tensor first. And then they are incorporated into the vector-valued Chan-Vese model to extract the valid measurement region. This method is verified in a variety of interference fringe patterns, and the segmentation results show its feasibility and accuracy.