• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.45-50
• /
• 2021

The adjustment of lens magnification can make the degree of precision in pattern measurement be improved, but several problems such as high cost, smaller field of view and stage error accumulation are followed. In this paper, a method for precisely measuring patterns is proposed based on gradient transition vector, in order to solve these problems. The performance of our method is evaluated using pattern images with several directions. Also, it is compared with previous methods based on edge and gray-level moment. It is judged that the proposed method outperforms consistent pattern width results, and so could be applied to automation processes for measurement and inspection of precise and complexed patterns in IT, BT industry products.

• 디지털산업정보학회논문지
• /
• 제15권4호
• /
• pp.63-70
• /
• 2019

The subject of the simultaneous measuring system of base pattern and deposition pattern is a new research topic on a defect inspection of OLED. In this paper, we propose a new OLED inspection method that simultaneously measures standard and deposition pattern images. This method reduces unnecessary processes and tac time during OLED inspection. For an additional reduction of the tac time during pattern measurement, the ROI was configured to measure only in the designated ROI area instead of measuring the entire area of an image. During the ROI set-up, the value of effective deposition pattern area is included so that if the deposition pattern is out of the ROI zone, it would be treated as a defect before measuring the size and center point of the pattern. As a result, the tac time and inspection process could be shortened. The proposed method also could be applied to the OLED manufacturing process. Production of OLED could be increased by reducing tac time and inspection process.

• 한방재활의학과학회지
• /
• 제20권2호
• /
• pp.89-99
• /
• 2010

Objectives : This study was designed to analyze the pattern of asymmetrical alignment. Methods : This study was carried out with the data from comprehensive medical testing. 91 subjects aged 30-39 were evaluated by full spine AP X-ray. For pelvis, innominate measurement(IM), off centering measurement(OCM), ilium shadow measurement(ISM), major axis of obturator foramen(MaF), minor axis of obturator foramen(MiF) were analyzed. Spinal curvature and height of shoulder girdle were analyzed. Results : 1. In pelvis, It. posterior-inferior and it. inflare combination pattern was 38 cases(42.8%). 2. In spinal curvature, "reverse S" curve was 45 cases(49.4%) and "reverse C" curve was 30 cases(33%). 3. In shoulder girdle, It. superior pattern was 42 cases(46.1 %) and It. superior pattern was 39 cases(42.9%). 4. In whole body analysis, It. posterior-inferior and It. inflare pelvis, "reverse S" spinal curvature and It. superior shoulder girdle combination patten was 11 cases(12.1 %). This pattern is similar to Kendall's right handedness pattern and Zink's common compensatory pattern. Conclusions : Results from this investigation showed asymmetrical alignment in 30-39 years-old adults. This results are expected to contribute to classifying the alignment pattern in clinic and systemic treatment.

• 한국의상디자인학회지
• /
• 제25권4호
• /
• pp.45-57
• /
• 2023

This research compared and analyzed a representative jacket pattern making method to suggest implications for the mass customization process of clothing. Four types of pattern making methods were selected according to the degree of reflection of human body measurements. Patterns were analyzed according to the size of middle-aged women. The results of this study are as follows. First, it identified and compared the difference in human body measurement and drafting processes required for pattern drafting. Next, as a result of analyzing the manuals and institutional figures presented in the pattern drafting manuals, problems such as B.P. location and compartment of the chest circumference, which are not appropriate, were found and the human body measurement method is different for each pattern making method. Through the above analysis, the advantages and disadvantages of the pattern making methods were identified and proposed improvements and implications for the application to the apaarel mass customization process were presented.

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.935-956
• /
• 2016

With the help of advanced image acquisition and processing technology, the vision-based measurement methods have been broadly applied to implement the structural monitoring and condition identification of civil engineering structures. Many noncontact approaches enabled by different digital image processing algorithms are developed to overcome the problems in conventional structural dynamic displacement measurement. This paper presents three kinds of image processing algorithms for structural dynamic displacement measurement, i.e., the grayscale pattern matching (GPM) algorithm, the color pattern matching (CPM) algorithm, and the mean shift tracking (MST) algorithm. A vision-based system programmed with the three image processing algorithms is developed for multi-point structural dynamic displacement measurement. The dynamic displacement time histories of multiple vision points are simultaneously measured by the vision-based system and the magnetostrictive displacement sensor (MDS) during the laboratory shaking table tests of a three-story steel frame model. The comparative analysis results indicate that the developed vision-based system exhibits excellent performance in structural dynamic displacement measurement by use of the three different image processing algorithms. The field application experiments are also carried out on an arch bridge for the measurement of displacement influence lines during the loading tests to validate the effectiveness of the vision-based system.

• 대한가정학회지
• /
• 제17권2호
• /
• pp.1-8
• /
• 1979

Recently, the Korean women has been steadily growing in number of wearing slacks , therefore the measurement data on lower part of body for slacks pattern construction have become needed. Thus, in order to obtain the measurement data, 304 of sophomore and junior classes form universities and colleges in Seoul city area were selected on purposed and , set to the object of study. In the course of measurement , thirteen items on lower part of body which is the basis of slacks pattern construction were measured, and then average balue, standard deviation and the mutual correlation were obtained.

• Nuclear Engineering and Technology
• /
• 제47권7호
• /
• pp.804-813
• /
• 2015

The electrical-impedance method has been widely used for void-fraction measurement in two-phase flow due to its many favorable features. In the impedance method, the response characteristics of the electrical signal heavily depend upon flow pattern, as well as phasic volume. Thus, information on the flow pattern should be given for reliable void-fraction measurement. This study proposes an improved electrical-conductance sensor composed of a three-electrode set of adjacent and opposite electrodes. In the proposed sensor, conductance readings are directly converted into the flow pattern through a specified criterion and are consecutively used to estimate the corresponding void fraction. Since the flow pattern and the void fraction are evaluated by reading conductance measurements, complexity of data processing can be significantly reduced and real-time information provided. Before actual applications, several numerical calculations are performed to optimize electrode and insulator sizes, and optimal design is verified by static experiments. Finally, the proposed sensor is applied for air-water two-phase flow in a horizontal loop with a 40-mm inner diameter and a 5-m length, and its measurement results are compared with those of a wire-mesh sensor.

• 공학교육연구
• /
• 제18권6호
• /
• pp.64-69
• /
• 2015

A video-work story analysis system based on emotional state measurement includes a content provision unit which provides story content of a video-work, a display unit which displays content provided by the content provision unit, an emotional state measurement unit which measures a tense-relaxed emotional state of a viewer viewing the displayed story content, a story pattern analysis unit which analyzes the tense-relaxed emotional state measured from the emotional state measurement unit according to a scene in the story content provided by the content provision unit, and a story pattern display unit which prints out an analysis result or displays the analysis result as an image. The emotional state measurement unit measures a tense or relaxed emotional state through one or more analyses among a brainwave analysis, a vital sign analysis, or an ocular state analysis. A writer may obtain support in an additional scenario modification work, and an investor may obtain support in making a decision through the above description. Furthermore, the video-work story analysis system and analysis method based on emotional state measurement may extract a particular pattern with respect to a change in an emotional state of a viewer, compile statistics, and analyze a correlation between a story and an emotional state.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.15-21
• /
• 2019

In order to secure the safety of various machinery, it is very important to develop a technique for accurately and quickly measuring the cracks generated in the mechanical equipment and evaluating the mechanical characteristics. The evaluation of the mechanical properties is accompanied by an appropriate strain measurement according to the material and crack occurrence of the target structure. Especially, when micro cracks are generated, the evaluation method is very important. Digital image correlation is an optical full field displacement measuring method which is using currently with speckles in the interested area. However the evaluation method and conditions of image distributions have to be considered carefully to measure the crack occurrence because the images of the speckle patterns affect the quality of displacement results. In this study, the speckle pattern density is characterized to improve the accuracy of the measurement method. And also the micro crack initiation is detected by the measured displacement in the adopted speckle pattern distribution. It is shown that the proposed method is useful to determine the density pattern distribution for the accurate measurement and crack detection.

• 대한인간공학회지
• /
• 제19권1호
• /
• pp.109-125
• /
• 2000

The purpose of this study was to provide basic data for a more functional torso's pattern by analyzing multidimensional anthropometric measurements and the wearing condition. For the functional torso's pattern drafting, the fitness state of basic torso's patterns(4 types) was compared and evaluated from the cross-sectioned overlap maps by $moir{\acute{e}}$ topography. The results were as follows: 1. According to the measurements of four patterns by using the one-dimensional measurement, the amount of ease in girth item for pattern A was the smallest. The ease of clothes was affected by the position of dart, the amount of dart, and the drafting method. 2. As the results of wearing evaluation by $moir{\acute{e}}$ topography method, pattern B had the largest space length for hip part, pattern A, C and D had the largest space length for bust part. Also, in the all measurement items, pattern A had the smallest amount of ease. The space length for bust and waist part of pattern B was smaller than pattern D, but, for abdomen and hip part of pattern B was larger than pattern D. The space length of pattern C was revealed intermediate for all measurement part. 3. The significant difference of space length of each pattern was shown in all parts except bust part(p<.05). The amount of space was affected by the amount of dart, the characteristics of the somatotype, and the drafting method.