• Journal of the Korean Society of Costume
• /
• v.15
• /
• pp.21-45
• /
• 1990

The purpose of this thesis is to study the method of the reasonable pattern design. The studying method is based on the original principle of the trousers' cutting and I have a hypothesis about the trousers pattern which should be proved. When I selected the practical method, I made use of the international measuring rule, graph paper and tracing paper, in order to prove the new pattern design. The reasonable pattern design should be the one of the suitable original principles to be suited in the design through any measurement. Therefore, I have discussed the above mentioned design. I find out the conclusion to prove the hypothesis of pattern design with the experimental measure after showing the above mentiond design. The characteristics is as follows. First : To be convinient when walking, because of little degree as folding of the front part of trousers with the under-angle. Second : To be suitable in proportion to the length of trousers and the under-angle. Third ; When folding the center line of the Sapok (a name of one of the trousers parts), the length of the Sapoks is same and harmonized with the Sapoks because of the same angle of both Sapoks in any case of the measurement. Fourth : No correction of the lines when dressing, for the same points of the large Sapok and the small one. Fifth : To be easiness of the pattern design through the concrete measurement. I could find out a little extent errors of pattern showings, an easiness of dressing, scientification of formation in Korean trousers and standard of the practical measurement in the program to be presented as the result of studying.

• Journal of Periodontal and Implant Science
• /
• v.41 no.4
• /
• pp.167-175
• /
• 2011

Purpose: Periodontal ligament (PDL) cell differentiation into osteoblasts is important in bone formation. Bone formation is a complex biological process and involves several tightly regulated gene expression patterns of bone-related proteins. The expression patterns of bone related proteins are regulated in a temporal manner both in vivo and in vitro. The aim of this study was to observe the gene expression profile in PDL cell proliferation, differentiation, and mineralization in vitro. Methods: PDL cells were grown until confluence, which were then designated as day 0, and nodule formation was induced by the addition of 50 ${\mu}g$/mL ascorbic acid, 10 mM ${\beta}$-glycerophosphate, and 100 nM dexamethasone to the medium. The dishes were stained with Alizarin Red S on days 1, 7, 14, and 21. Real-time polymerase chain reaction was performed for the detection of various genes on days 0, 1, 7, 14, and 21. Results: On day 0 with a confluent monolayer, in the active proliferative stage, c-myc gene expression was observed at its maximal level. On day 7 with a multilayer, alkaline phosphatase, bone morphogenetic protein (BMP)-2, and BMP-4 gene expression had increased and this was followed by maximal expression of osteocalcin on day 14 with the initiation of nodule mineralization. In relationship to apoptosis, c-fos gene expression peaked on day 21 and was characterized by the post-mineralization stage. Here, various genes were regulated in a temporal manner during PDL fibroblast proliferation, extracellular matrix maturation, and mineralization. The gene expression pattern was similar. Conclusions: We can speculate that the gene expression pattern occurs during PDL cell proliferation, differentiation, and mineralization. On the basis of these results, it might be possible to understand the various factors that influence PDL cell proliferation, extracellular matrix maturation, and mineralization with regard to gene expression patterns.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1047-1050
• /
• 2002

Generally, the Black Matrix of CRT is formed by the application of photoresist and black material separately. We have developed the simple process for black matrix of CRT. We used the black photoresist, It made it possible that the formation of Black Matrix by application of the light exposure and development only once.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.60
• /
• pp.23-36
• /
• 2000

A probabilistic model of burr formation in face milling of gray cast iron is proposed. During a face milling operation, an irregular pattern of the edge profile consisting of burrs and edge breakouts is observed at the end of cut. Based on the metal cutting theory, we derive a probabilistic model. The operational bayesian modeling approach is adopted to include the relevant theory in the model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.335-338
• /
• 2001

With the use of the electron microscopy and X-ray phase analysis the regularities of carbon deposit formation in process of methane and propane pyrolysis on the zeolites, Kazakhstan natural clays, chrome and bauxite sludge containing metal oxides of iron subgroup, have been studied. In process of over-carbonization the trivalent iron was reduced to metal form. In addition, the carbon tubes of divers morphology had been impregnated with ultra-dispersed metal particles. The kinetic parameters of carbon formation in process of methane decomposition on the zeolite CoO mixture surface were investigated by method of thermo-gravimetric analysis. The morphology and structure of formed carbon fibrils, with the metal particles fixed at their ends, have been investigated, the formation of branched carbon fibrils pattern, so called octopus, being found.

• Korean Journal of Oriental Medicine
• /
• v.15 no.2
• /
• pp.33-37
• /
• 2009

Objectives : The authors performed this study to further understand Saam acupuncture method in an aspect of formation process. Methods : We were finding Saam's idea in a preface of the book. And we analyzed Saam acupuncture patterns to understand their formation. Results & Conclusion : We assume that Saam acupuncture patterns has formed over time. We were able to split their patters into three phases. That is Primitive-phase, Basic-phase and Practical-phase. We think they are traces of Formation Process. In the first, Saam found DongHaeng-acupoints that have in common Five Element between the five viscera and acupoint. And then, he compounded other meridian's DongHeng-acupoints to control self meridian. Finally acupoints of self meridian were added.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.93-98
• /
• 2013

Nanoimprint lithography (NIL) is a next generation technology for fabrication of micrometer and nanometer scale patterns. There have been considerable attentions on NIL due to its potential abilities that enable cost-effective and high-throughput nanofabrication to the display device and semiconductor industry. To successfully imprint a nanosized pattern with the thermal NIL, the process conditions such as temperature and pressure should be appropriately selected. This starts with a clear understanding of polymer material behavior during the thermal NIL process. In this paper, a filling process of the polymer resist into nanometer scale cavities during the thermal NIL at the temperature range, where the polymer resist shows the viscoelastic behaviors with consideration of stress relaxation effect of the polymer. In the simulation, the filling process and the residual layer formation are numerically investigated. And the effects of pressure and temperature on NIL process, specially the residual layer formation are discussed.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.4
• /
• pp.1113-1122
• /
• 2015

This paper is concerned with the pattern formation of a diffusive predator-prey model with two time delays. Based upon an analysis of Hopf bifurcation, we demonstrate that time delays can induce spatial patterns under some conditions. Moreover, by use of a series of numerical simulations, we show that the type of spatial patterns is the spiral wave. Finally, we demonstrate that the spiral wave is asymptotically stable.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.2
• /
• pp.137-142
• /
• 2011

In this paper we formulate a predator-prey system in two patches in which the per capita migration rate of each species is influenced only by its own density, i.e. there is no response to the density of the other one. Numerical studies show that at a critical value of the bifurcation parameter the system undergoes a Turing bifurcation, i. e. the stable constant steady state loses its stability and spatially non-constant stationary solutions, a pattern emerge.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.71-72
• /
• 2010