• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.1
• /
• pp.71-77
• /
• 1998

In this Paper, the training principles and the control method of adaptive array antennas using the LMS and CMA algorithms for the $\pi$/4 QPSK signal is showed and the convergence characteristics, the adaptivity of directional pattern SINR and the replication of desired signal of adaptive arrays are compared and discussed each other. Computer simulation results showed that the SINR of LMS adaptive array was 13.8［dB］, and that of CMA was 12.8［dB］, and also the convergence characteristics of LMS was fast a little than that of CMA. The LMS adaptive array was also performed null point well for the interference signal direction than that of the CMA adaptive array.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.273-279
• /
• 2009

In this paper, an antenna which has dipole-like radiation pattern and low profile is proposed. The antenna is composed of four elements slot array based on L-shaped 0.43 $\lambda_g$ slot element. It presents a omni-directional radiation patter in the azimuth plane and has a null toward broad-side direction. In the design, a small mono-pole antenna which acts as a large capacitance element, combined with the partially removed ground plane by four L-shaped slots. As a result, these structure act as a LC resonator for radiation. The measured result shows, the impedance bandwidth(VSWR$\leq$2) of the proposed antenna is 60 MHz(2.35$\sim$2.41 GHz). The measured maximum radiation gain and efficiency of proposed antenna is 0.02 dBi, 56.7 % at center frequency 2.38 GHz, respectively. The proposed antenna can be applied to wireless tan access point system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.2
• /
• pp.214-219
• /
• 1997

Mutation rate of M$_2$ plants that were treated with three types of double treatments of chemical mutagens(1.5mol Na$N_2$ ＋ 0.75mol MNH, 0.75mol MNH ＋ 0.75mol MNH and 0.5mol MNH ＋ 0.5mol MNH) were estimated on the rate of chlorophyll mutant, changes of isozyme loci ; esterase (Est), glutamate oxaloacetate transaminase(GOT ; AAT) and leucyl aminopeptydase(LAP ; AMP). Rate of chlorophyll mutants (3.3％ =no. of seedling carrying mutant / all number of M$_2$ seedlings $\times$ 100) and rate of esterase isozyme loci mutants(3.5％ =no. of plant carrying mutant / all number of M$_2$ plant) in Dema were higher than one of Sacheon 6, but no significant differences in GOT, LAP. Among isozymes, most of mutants in M$_2$ plant of two varieties were found in esterase (73％ of total mutants were occurred in esterase loci). Although many of null bands were found in GOT 3, these were not repeatable and no real mutants. It might be due to qualities of starch, amount of extract buffer and degradation of isozyme during electrophoresis and staining.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1204-1211
• /
• 2012

Measurement and analysis results of the extracted radiation-patterns from the field-experiments which were conducted to acquire the generic technology for calibration and validation of the satellite SAR system(Synthetic Aperture Radar) are presented in this study. Prototype of active transponder is adjustable within maximum 63.1 dBsm of RCS (Radar Cross Section) and includes the receiving-function with external receiver. To increase an accuracy of these field experiments, we repetitively measured satellite SAR systems of the same operating mode(i.e., COSMO-SkyMed No. 2 & 3, hh-pol., strip-map himage mode, 3 m resolution). Then, the reliability of experimental results was cross-checked through analysis of the RCS of active transponder on SAR image. The property of azimuth radiation patterns of satellite SAR system extracted from them has $0.352^{\circ}$ of HPBW(half-power beamwidth), $0.691^{\circ}$ of FNBW(first-null beamwidth), and 11.17 dB of PSLR(peak to side lobe ratio), respectively.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.2
• /
• pp.189-194
• /
• 2004

Amylase isozyme based three multivoltine viz., N+p, Np, N+ $p^{cho}$ and two bivoltine-D6+p, D6p syngenic lines (Syn. L) were developed from germplasm (GP) stocks Nistari (N) and D6 respectively. haemolymph isozyme pattern at pH 7.0 and 8.5 depicted a total 11 number (Am $y_{1 to 6}$ at pH 7.0 and Am $y^{l to 5}$ at pH 8.5) of native proteins (NP) of various sizes are amylase isozyme expressers. Among eleven NPs, two NPs of 770 kDa (Am $y^{6}$ at pH 7.0) and 376 kDa (Am $y^3$ at pH 8.5) are $\alpha$-amylase expressers and remaining NPs of 370, 364, 350, 329 and 274 kDa at pH 7.0 and 206, 292, 416, 725 kDa at pH 8.5 are $\beta$-amylase expressers. Accordingly, digestive juice amylase isozyme pattern at aforesaid pH also depicted a total number of 10 NPs (Am $y^{1 to 5}$) at each pH 7.0 and 8.5 are amylase expressers of which NP of 387 kDa (Am $y^4$ at pH 7.0) and 780 kDa (Am $y^{5}$ at pH 8.5) are a-amylase expresser. Remaining NPs of 338,297 ＆ 216 kDa at pH 7.0 and 370, 341, 329 ＆302 kDa at pH 8.5 are $\beta$-amylase expresser. Recurrent backcross lines (RBL) viz., N+pRBL and NpRBL were developed through introgression of high shell weight character (a multigenic trait) to be used further for congenic line (Con. L) development and to understand any association with introgressed character. Isozyme pattern in haemolymph of RBLs depicted only one $\alpha$-amylase of 770 kDa at pH 7.0 and 376 kDa at pH 8.0 with three and four respective $\beta$-amylase bands but in bivoltine lines numbers of $\beta$-amylase bands vary between 1 to 2 at aforesaid pH. Variability was also observed in digestive juice of multivolitine and its RBLs but bivoltine lines express null activity at both pH except appearance of one very week $\alpha$-amylase band D6+p at pH 8.5. Overall study suggests that not a single NP at both pH is common for expression of any band of amylase isozyme i.e., a totally different set of proteins are the amylase isozyme expresser at specific pH and no molecular factor of amylase is associated in developed RBLs which showed improvement on survival, single cocoon shell weight (SCSW) and single filament length over receptor parents.s.s.s.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.366-373
• /
• 2013

This paper discusses the singly curved phased reflector for reduced RCS pattern, which has minimized RCS level at boresight with a null by phase cancelation and the lowered RCS level of main beam by splitting the main beam into multi directions. Considering the reduced level of boresight and main beam compared to the same sized reference PEC, this proposed multi-beam reflector can be adopted in the mono-static radar and the bi-static radar environment. The proposed reflector is a multi-beam reflector, which has different phase distributions at each row for different steering angle. It is designed through an intermediate stage of a single and dual-beam reflector. The behaviors of the designed reflectors are verified through full-wave simulation and experiment. The reflectors are designed in the frequency of 10 GHz and it has a size $240{\times}180mm^2$($8{\times}6\;{\lambda}^2$) with the curvature k=3.3. From the measured results, the proposed reflectors reduce the reflected power by 17 dB at boresight.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.2
• /
• pp.100-104
• /
• 2008

Titanium sheet metal substrates used in thin film batteries were wet etched and their surface area was increased in order to increase the discharge capacity and power density of the batteries. To obtain a homogeneous etching pattern, we used a conventional photolithographic process. Homogeneous hemisphere-shaped wells with a diameter of approximately $40\;{\mu}m$ were formed on the surface of the Ti substrate using a photo-etching process with a $20\;{\mu}m{\times}20\;{\mu}m$ square patterned photo mask. All-solid-state thin film cells composed of a Li/Lithium phosphorous oxynitride (Lipon)/$LiCoO_2$ system were fabricated onto the wet etched substrate using a physical vapor deposition method and their performances were compared with those of the cells on a bare substrate. It was found that the discharge capacity of the cells fabricated on wet etched Ti substrate increased by ca. 25% compared to that of the cell fabricated on bare one. High discharge rate was also able to be obtained through the reduction in the internal resistance. However, the cells fabricated on the wet etched substrate exhibited a higher degradation rate with charge-discharge cycling due to the nonuniform step coverage of the thin films, while the cells on the bare substrate demonstrated a good cycling performance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.57-62
• /
• 2008

In this paper, a folded helical monopole antenna for TDMB receiving and a trapezoidal fractal microstrip patch antenna for GPS were designed and fabricated for the vehicle shark antenna. To minimize null which is generating toward antenna axis direction and to receive both vertical polarization and horizontal polarization for TDMB antenna, we fold 90 degree helical monopole element. GPS antenna to get wide bandwidth and gain improvement was designed an air substrate trapezoidal microstrip patch antenna. Fabricated TDMB and GPS antenna were measured for S11 and radiation pattern, and compared with a commercialized antenna. TDMB antenna shows 3 dB higher antenna gain and receiving signal strength than the commercial one. GPS antenna shows the gain of 4.31 dBi at the resonant frequency, which is $3{\sim}5\;dB$ higher gain over whole operating band and 135MHz wide bandwidth at 2:1 VSWR than the conventional ceramic antenna.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.8
• /
• pp.26-32
• /
• 2002

In this paper, we propose a suboptimal receiver combining adaptive array antenna and orthogonal decision-feedback detector in DS/CDMA system. Adaptive way antenna can cancel out undesired signal using beamforming scheme. However, if there are interfering signals from undesired users with the same incident angle as that of a desired user, an adaptive array antenna cannot suppress them. The proposed receiver can cancel out remaining interference from users having nearly the same beam pattern. And we employ Orthogonal Decision-Feedback Detector (ODFD) as Multiuser detection. The ODFD performs as good as the decorrelating decision -feedback detector (DDFD) with much less complexity. Simulation results show that the proposed system provides a significantly enhanced performance.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.2
• /
• pp.46-54
• /
• 1994

In this paper, an analysis and design method is proposed, which is to improve the directivity of microstrip array antennas conformed to a cylindrical surface. In the case of forming an arc-array in the circumferential direction on a circula-cylinder surface, the circular-cylinder can be approximated to a polygonal-pillar and on each pillar-planes the sub-arrays, Dolph-Tschebyscheff array and uniform array with a beam steered in the desired direction, would make a sharp directivity for the total cylin- drical array antenna. And the radiation pattern according to the type of its sub arrays is analyzed and compared using the cylindrical-cavity codel. A cylindrical microstrip array antenna, with 12 elements and uniform arra as a sub-array which have an equal distance$\lambda_0$/2between the elements, is manufactured and conformed to a cylinder with radius of 6 The measured data of side lobe level, HPBW and FNBW are - 13dB, $9^{\circ}$, and $15{\circ}$, ,respectively. This result shows a good improvement on the directivity comparing with a linear array.