• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.183-190
• /
• 2012

PURPOSES : The fundamental diagram provides basic information necessary in the analysis of traffic flow and highway operation. When traffic flow is congested, the density-flow points in the fundamental diagram are widely scattered and move in a stochastic manner. This paper investigates the pattern of density-flow point transitions and identifies car-following behaviors underlying the density-flow transitions. METHODS : From a microscopic analysis of 722 fundamental diagrams of NGSIM data, a total of 20 transition patterns of fundamental diagrams are identified. Prominent features of the transition patterns are explained by the behavior of the leader and follower. RESULTS : It is found out that the average speed and the speed difference between the leader and the follower critically determine the density-flow transition pattern. The density-flow path is very sensitive to the values of vehicle speed and spacing especially at low speed and high density such that most fluctuations in the fundamental diagram in the congested regime is due to the noise of speed and spacing variations. CONCLUSIONS : The result of this study suggests that the average speed, the speed difference between the leader and the follower, and the random variations of speed and spacing are dominant factors that explain the transition patterns of a fundamental diagram.

• Journal of Korea Foundry Society
• /
• v.12 no.4
• /
• pp.305-316
• /
• 1992

Steel and iron castings made with expandable polystylene (referred to hereafter as EPS) patterns are often affected by distinctive defects associated with incomplete decomposition of the EPS as the molds are filled with metal. The effects of practical factors on carbon pick-up were investigated on the specimens, by taking successive layers of swarf and analysis, whereas the lustrous carbon is determined by using combustion analysis. The quality of the castings, with particular reference to carbon pick-up in low carbon steel and lustrous carbon on gray iron, is further influenced to a significant extent by such practical factors as reduced pressure, the pouring temperature, the density of EPS pattern, the additive in coating and in pattern and the casting thickness. The rate at which carbon pick-up and lustrous carbon deposites are formed can be reduced by reducing the density of the pattern and also reducing pressure, especially by adding $Na_2CO_3$ in coating and in pattern to promote $CO_2$ evolution. The upper parts of castings obtained using EPS patterns are slightly higher in carbon pick-up and in lustrous carbon than other parts.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.590-595
• /
• 2004

The shape and size variations of the nanopatterns produced on a positive photoresist using a near-field scanning optical microscope(NSOM) are investigated with respect to the process variables. A cantilever type nanoprobe having a 100nm aperture at the apex of the pyramidal tip is used with the NSOM and a He-Cd laser at a wavelength of 442nm as the illumination source. Patterning characteristics are examined for different laser beam power at the entrance side of the aperture( $P_{in}$ ), scan speed of the piezo stage(V), repeated scanning over the same pattern, and operation modes of the NSOM(DC and AC modes). The pattern size remained almost the same for equal linear energy density. Pattern size decreased for lower laser beam power and greater scan speed, leading to a minimum pattern width of around 50nm at $P_{in}$ =1.2$\mu$W and V=12$\mu$m/. Direct writing of an arbitrary pattern with a line width of about 150nm was demonstrated to verify the feasibility of this technique for nanomask fabrication. Application on high-density data storage using azopolymer is discussed at the end.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.11
• /
• pp.128-131
• /
• 1993

In order to get the basic data for the study of the heat stimulation of burning moxa, the pattern of combustion temperature, which is one of the important factors of thermal characteristics, was measured by density of cone moxa along the time procedure. The following results have been obtained 1) The pattern of combustion temperature by moxa burning was classified into input period which means the infiltration of heat into the area and output period which means the radiation of heat from the area. The input period consists of preheating and heating periods, while the output period consists of heat retaining and cooling periods. 2) The pattern of combustion temperature showed the same type or curve, which was not influenced by the moxa weight. However, Its pattern gradient are varied by density. It is considered that the pattern of combution temperature is primarily influenced by the rate of combustion temperature, gradient temperature and duration of combustion.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.520-534
• /
• 2004

As the density of memories increases, unwanted interference between cells and the coupling noise between bit-lines become significant, requiring parallel testing. Testing high-density memories for a high degree of fault coverage requires either a relatively large number of test vectors or a significant amount of additional test circuitry. This paper proposes a new tiling method and an efficient built-in self-test (BIST) algorithm for neighborhood pattern-sensitive faults (NPSFs) and new neighborhood bit-line sensitive faults (NBLSFs). Instead of the conventional five-cell and nine-cell physical neighborhood layouts to test memory cells, a four-cell layout is utilized. This four-cell layout needs smaller test vectors, provides easier hardware implementation, and is more appropriate for both NPSFs and NBLSFs detection. A CMOS column decoder and the parallel comparator proposed by P. Mazumder are modified to implement the test procedure. Consequently, these reduce the number of transistors used for a BIST circuit. Also, we present algorithm properties such as the capability to detect stuck-at faults, transition faults, conventional pattern-sensitive faults, and neighborhood bit-line sensitive faults.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1290-1299
• /
• 1990

Characteristics of flow patterns in horizontal gas-liquid two-phase flow for two different sizes of pipe were investigated based upon a statistical analysis of differential pressure fluctuations at an orifice. The probability density function and the power spectral density function of the traces indicate peculiar shapes depending upon the two-phase flow regime. Mixed and separated flows also could be identified by the autocorrelation function. The transition region from separated flow to mixed flow also could be identified by these statistical properties. The experimental data determined by this method were compared with the flow pattern maps suggested by other investigators. The result indicates that the statistical characteristics of differential pressure fluctuations at orifices may be a useful tool for identifying flow patterns of horizontal gas-liquid two-phase flow.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.20-25
• /
• 1998

Cu removal rates for various SiO$_2$ trench pitch sizes and densities and AFM images of surface profiles after global planarization using Cu CMP technology are investigated. In the experimental results, Cu removal rates are increasing as the pattern densities and pattern pitches are getting high and low, respectively, and then decreasing after local planarization. The rms roughness after global planarization are about 120$\AA$. AFM images with a 50% pattern density for 1${\mu}{\textrm}{m}$ and 2${\mu}{\textrm}{m}$ pitches show that thicknesses of 120~330$\AA$ Cu interconnects have been peeled off and oxide erosion of Cu/Sio$_2$ sidewall is observed. However, AFM images with a 50% pattern density for 10${\mu}{\textrm}{m}$ and 15${\mu}{\textrm}{m}$ pitches show that 260~340$\AA$ thick Cu interconnects have been trenched at the boundaries of Cu/Sio$_2$ sidewall.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.1
• /
• pp.53-64
• /
• 2014

The main objective of this research was to understand the characteristics of printed geometric patterns through the statistical & qualitative analysis of fashion appeared in contemporary female collections 2011 S/S to 2013 A/W. Data collection of 294 was done through review of 'pr$\hat{e}$t-$\grave{a}$-porter Collections' of three major fashion cities; Paris, Milan and NY. Statistical analysis of frequency was conducted. Also qualitative interpretation of natural print design' characteristics were completed. The main findings were as followed; 1,636 of the total 15,852 designs were printed patterns in 12 Collections and the occurrence rate of printed geometric patterns in three collections were 8.6% in Milan, 9.2% in Paris and 12.9% in N.Y. Most geometric patterns were the types of compact or medium density in a front patterns with a variety of sizes and mainly applied to the one piece dress or two piece clothing item combination styles. Formative Characteristics of printed geometric patterns were classified into four types. First, a variety of thicknesses and shapes, such as a line or a rectangle shape to take advantage of the types of the typical geometric pattern. Second types were using the motifs which inspired by geometric shapes such as point, circle star and other special geometric shapes and arranging them regularly with various sizes and density. The third was repeated particular motifs which based on complex and sophisticated mathematical formulas. Fourth were the specific diagram types of bold and free shapes or dividing the flat and arranging them without rules, or the combination type of various geometric motifs.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.43-51
• /
• 2001

As the density of memories increases, unwanted interference between cells and coupling noise between bit-lines are increased. And testing high-density memories for a high degree of fault coverage can require either a relatively large number of test vectors or a significant amount of additional test circuitry. So far, conventional test algorithms have focused on faults between neighborhood cells, not neighborhood bit-lines. In this paper, a new test algorithm for neighborhood bit-line sensitive faults (NBLSFs) based on the NPSFs(Neighborhood Pattern Sensitive Faults) is proposed. And the proposed algorithm does not require any additional circuit. Instead of the conventional five-cell or nine-cell physical neighborhood layouts to test memory cells, a three-cell layout which is minimum size for NBLSFs detection is used. Furthermore, to consider faults by maximum coupling noise by neighborhood bit-lines, we added refresh operation after write operation in the test procedure(i.e.,$write{\rightarrow}\;refresh{\rightarrow}\;read$). Also, we show that the proposed algorithm can detect stuck-at faults, transition faults, coupling faults, conventional pattern sensitive faults, and neighborhood bit-line sensitive faults.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.6
• /
• pp.469-477
• /
• 2004

This study examined distributional patterns of Asterias amurensis in Tongyeong, the central South Sea of Korea. The density of the sea star was estimated at 10 chosen sites in the inner and the outer parts of the Tongyeong coast from December 2000. The mean density of the species in this area was $2.4ind./m^{2}$. The seasonal surveys conducted at 3 arbitrary chosen sites (i.e., sea cage, reef and soft sediment) also showed that the abundance of the species at the sea cage site $(density:\;3.6\;ind./m^{2};\;biomass:\;250.7\;gwwt/m^{2})$ was significantly higher than at the reef site $(density:\;1.7\;ind./m^{2};\;biomass:\;63.5\;gwwt/m^{2})$ and the soft sediment site $(density:\;0.4\;ind./m^{2};\;biomass:\;18.9\;gwwt/m^{2})$. Densities were higher at sea cages areas than at reefs and soft bottom sites. At sea cage site, A. amurensis population exhibited a strong aggregated distributional pattern. In contrast, at reef and soft bottom sites, A. amurensis population showed a random distributional pattern. The spatial difference in prey species and its abundance was the primary factor determining the spatial heterogeneity of the sea star in its behavior characteristics. Experiments on the feeding preference indicated that A. amurensis had a strong selectivity on its prey, but this selectivity varied between populations living in different sites. In particular, A. amurensis populations at the reef site showed a strong selectivity on various sessile and mobile animals living in reef areas, suggesting that these animal groups may play a role as "windows for the survival of A. amurensis". These results suggest that the distribution of A. amurensis in Tongyeong is closely associated with abundance of prey species and the bottom composition.