• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.9
• /
• pp.936-941
• /
• 2014

Walking mechanisms are very important for legged robots to ensure their stable locomotion. In this research, Klann-linkage is suggested as a walking mechanism for a water-running robot and is optimized using level average analysis. The structure of the Klann-linkage is introduced first and design variables for the Klann-linkage are identified considering the kinematic task of the walking mechanism. Next, the design problem is formulated as a path generation optimization problem. Specifically, the desired path for the foot-pad is defined and the objective function is defined as the structural error between the desired and the generated paths. A process for solving the optimization problem is suggested utilizing the sensitivity analysis of the design variables. As a result, optimized lengths of Klann-linkage are obtained and the optimum trajectory is obtained. It is found that the optimized trajectory improves the cost function by about 62% from the initial one. It is expected that the results from this research can be used as a good example for designing legged robots.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.546-554
• /
• 2021

In the signal processing of synthetic aperture sonar, it is subject that the platform in which the sensor array is installed moves along the straight line path. In practical operation in underwater, however, the sensor platform will have trajectory disturbances, diverting from the line path. It causes phase errors in measured signals and then produces deteriorated SAS images. In this study, in order to develop towed SAS, as tools to remove the phase errors associated with the trajectory disturbances of the towfish, motion compensation technique using Redundant Phase Center (RPC) and also Phase Gradient Autofocus (PGA) method is investigated. The performances of these two approaches are examined by means of a simulation for SAS system having a sway disturbance.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.264-271
• /
• 2017

This paper presents air traffic control simulation model for generating 4D trajectory, and aircraft dynamic model based on 4D trajectory information. With aircraft parameters from BADA and Total Energy Model, the trajectory is defined through modified Bezier curve and the simulation supports two aircraft control methods based on controlled time of arrival (CTA) or airspeed. The simulation results shown that flight time and path were almost identical to the defined trajectory, and derived the differences of each control methods according to wind conditions. Based on the simulation model developed in this study, it is expected to be applied to various air traffic management researches. Future studies will focus on applying optimization techniques in order to minimize the difference between generated trajectories and actual flight routes. This work will increase utilization of developed simulation futhermore.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.6
• /
• pp.53-61
• /
• 2014

For monitoring the flight trajectory and the status of a launch vehicle, the mission control system in NARO space center process data acquired from the ground tracking system, which consists of two tracking radars, four telemetry stations, and one electro-optical tracking system. Each tracking unit exhibits its own tracking error mainly due to multi-path, clutter and radio refraction, and by utilizing only one among transmitted informations, it is not possible to determine the actual vehicle trajectory. This paper presents a way of generating flight trajectory via post-processing the data received from the ground tracking system. The post-processing algorithm is divided into two parts: compensation for atmosphere radio refraction and multi-sensor fusion, for which a decentralized Kalman filter was adopted and implemented based on constant acceleration model. Applications of the present scheme to real data resulted in the flight trajectory where the tracking errors were minimized than done by any one sensor.

• Journal of Information Technology Applications and Management
• /
• v.28 no.1
• /
• pp.63-81
• /
• 2021

The advent of the convergence era led to the convergence of industries while increasing the uncertainty of R&D. R&D uncertainty can be addressed by identifying and addressing industrial innovation patterns, which Neo-Schumpeterian suggested can be identified through the process of identifying the technical characteristics of a particular industry, which can be embodied in the concept of technology trajectory. Thus, this study considered and proposed a method to track the technology trajectory of the convergence industry through topic modeling and patent citation network analysis, and applied it to the micro medical robot industry, which is a representative convergence industry, to track the technology trajectory of active catheter. In particular, it is intended to identify the unique characteristics of the industry by identifying the industry before the promotion of the national-led medical robot industry support policy. Therefore, we tried to understand the innovation pattern of the industry by tracking the technology trajectory of the industry before 2017, the time of full-scale support for the medical robot industry in the United States. Through tracking technology trajectories, the role of each technology classification, the development path, and the knowledge flow between applicants were analyzed empirically. The results of this study are expected to contribute to resolving the remaining uncertainties in the process of establishing an active catheter R&D strategy, one of the leading convergence industries, and furthermore, it is expected to be available for tracking technology trajectories in other industries.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.9
• /
• pp.891-897
• /
• 2010

This paper proposes a cooperative control algorithm for a dual-arms robot which is carrying an object to the desired location. When the dual-arms robot is carrying an object from the start to the goal point, the optimal path in terms of safety, energy, and time needs to be selected among the numerous possible paths. In order to quantify the carrying efficiency of dual-arms, DAMM (Dual Arm Manipulability Measure) has been defined and applied for the decision of the optimal path. The DAMM is defined as the intersection of the manipulability ellipsoids of the dual-arms, while the manipulability measure indicates a relationship between the joint velocity and the Cartesian velocity for each arm. The cost function for achieving the optimal path is defined as the summation of the distance to the goal and inverse of this DAMM, which aims to generate the efficient motion to the goal. It is confirmed that the optimal path planning keeps higher manipulability through the short distance path by using computer simulation. To show the effectiveness of this cooperative control algorithm experimentally, a 5-DOF dual-arm robot with distributed controllers for synchronization control has been developed and used for the experiments.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.351-356
• /
• 2022

Among the path planning methods used to generate the ship's path, the graph search-based method is widely used because it has the advantage of its completeness, optimality. In order to apply the graph-based search method to the berthing path plan, the deviation from the path must be minimized. Path following suitability should be considered essential, since path deviation during berthing can lead to collisions with berthing facilities. However, existing studies of graph search-based berthing path planning are dangerous for application to real-world navigation environments because they produce results with a course change just before berthing. Therefore, in this paper, we develop a cost function suitable for path following, and propose a 3D A* algorithm that applies it. In addition, in order to evaluate the suitability for the actual operating environment, the results of the path generation of the algorithm are compared with the trajectory of the data collected by manned operations.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.3
• /
• pp.250-256
• /
• 2012

Unmanned ground vehicles may be operated by remote control unit through the wireless communication or autonomously. However, the autonomous technology is still challenging and not perfectly developed. For some reason or other, the wireless communication is not always available. If wireless communication is abruptly disconnected, the UGV will be nothing but a lump of junk. What was worse, the UGV can be captured by enemy. This paper suggests a method, autonomous return technology with which the UGV can autonomously go back to a safer position along the reverse path. The suggested autonomous return technology for UGV is based on multi-correlated information based DB creation and matching. While SUGV moves by remote-control, the multi-correlated information based DB is created with the multi-sensor information; the absolute position of the trajectory is stored in DB if GPS is available and the hybrid MAP based on the fusion of VISION and LADAR is stored with the corresponding relative position if GPS is unavailable. In multi-correlated information based autonomous return, SUGV returns autonomously based on DB; SUGV returns along the trajectory based on GPS-based absolute position if GPS is available. Otherwise, the current position of SUGV is first estimated by the relative position using multi-sensor fusion followed by the matching between the query and DB. Then, the return path is created in MAP and SUGV returns automatically based on the MAP. Experimental results on the pre-built trajectory show the possibility of the successful autonomous return.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.979-987
• /
• 2012

This paper implements and integrates algorithms for terrain following of UCAVs (Unmanned Combat Aerial Vehicles): trajectory generation, guidance, and navigation. Terrain following is very important for UCAVs because they perform very dangerous missions such as Suppression of Enemy Air Defences while the terrain following can improve the survivability of UCAVs against from the air defence systems of the enemy. To deal with the GPS jamming, terrain referenced navigation based on nonlinear filter is chosen. For the trajectory generation, Voronoi diagram is adopted to generate horizontal plane path to avoid the air defense system. Cubic spline method is used to generate vertical plane path to prevent collisions with ground while flying sufficiently close to surface. Follow-the-Carrot and pure pursuit tracking methods, which are look-ahead point based guidance algorithms, are applied for the guidance. Numerical simulation is performed to verify the performance of the integrated terrain following algorithm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.503-508
• /
• 2010

Recently, the advance of mobile devices has made various services possible beyond simple communication. One of services is the predicting the future path of users and providing the most suitable location based service based on the prediction results. Almost of these prediction methods are based on previous path data. Thus, calculating similarities between current location information and the previous trajectories for path prediction is an important operation. The collected trajectory data have a huge amount of location information generally. These information needs the high computational cost for calculating similarities. For reducing computational cost, the meaningful location based trajectory model approaches are proposed. However, most of the previous researches are considering only the physical information such as stay time and the distance for extracting the meaningful locations. Thus, they will probably ignore the characteristics of users for meaningful location extraction. In this paper, we suggest a meaningful location extracting and trajectory simplification approach considering the stay time, distance, and additionally interaction information of user. The method collects the location information using GPS device and interaction information between the user and the others. Using these data, the proposed method defines the proximity of the people who are related with the user. The system extracts the meaningful locations based on the calculated proximities, stay time and distance. Using the selected meaningful locations the trajectories are simplified. For verifying the usability of the proposed method, we collect the behavioral data of smart phone users. Using these data, we measure the suitability of meaningful location extraction method, and the accuracy of prediction approach based on simplified trajectories. Following these result, we confirmed the usability of proposed method.