• 대한치과보철학회지
• /
• 제21권1호
• /
• pp.67-72
• /
• 1983

Path of insertion(1) can be defined that the direction of movement of an appliance from the point of initial contact of its rigid parts with the supporting teeth to the place of final rest. Krol(2) described that in the conventional path of insertion, all the rests are seated more or less simultaneously but in the use of the rotational path one segment of the partial denture is seated first then the remainder of the prosthesis is rotated into position. The rotational path of insertion is limited primarily to the tooth borne prosthesis. Its great advantages are the elimination of anterior clasps to improve ethetic and reduction of tooth coverage to minimize plaque accumulation. Either a rigid minor connector or proximal plate provides retention through its intimate contact with a proximal tooth surface below the height of contour as indicated at a o-degree tilt. A specially designed rest in conjunction with this retentive component satisfies the basic requirements of clasp design. The purpose of this study was a clinical evaluation of rotational path removable partial dentures. Author delivered rotational path removable partial dentures to three different cases of patients and evaluated function of the dentures, difficulties of removal and insertion of the dentures and supporting structures of the abutment teeth by means of clinical and X-ray examinations for eighteen months. According to the examination data author came to the conclusion that the prognosis of the rotational path removable partial dentures was excellent.

• The Journal of Advanced Prosthodontics
• /
• 제7권1호
• /
• pp.76-84
• /
• 2015

This article reviews the topic of how to identify and develop a removable partial denture (RPD) path of placement, and provides a literature review of the concept of the RPD path of placement, also known as the path of insertion. An optimal RPD path of placement, guided by mutually parallel guide planes, ensures that the RPD flanges fit intimately over edentulous ridge structures and that the framework fits intimately with guide plane surfaces, which prevents food collecting empty spaces between the intaglio surface of the framework and intraoral surfaces, and ensures that RPD clasps engage adequate numbers of tooth undercuts to ensure RPD retention. The article covers topics such as the causes of obstructions to RPD intra-oral seating, the causes of food collecting empty spaces that may exist around an RPD, and how to identify if a guide plane is parallel with the projected RPD path of placement. The article presents a method of using a surgical operating microscope, or high magnification (6-8x or greater) binocular surgical loupes telescopes, combined with co-axial illumination, to identify a preliminary path of placement for an arch. This preliminary path of placement concept may help to guide a dentist or a dental laboratory technician when surveying a master cast of the arch to develop an RPD path of placement, or in verifying that intra-oral contouring has aligned teeth surfaces optimally with the RPD path of placement. In dentistry, a well-fitting RPD reduces long-term periodontal or structural damage to abutment teeth.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.47-51
• /
• 1990

In the system of contemporary factory, the frequent generation of robot program reduces the efficiency of robot working. In this study, the SIOPS (Soldering and Insertion Offline Programming System) that automatically generates the robot program is presented. The system can change the parameter about soldering and insertion interactively and generate the robot tool path.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.704-709
• /
• 1994

The insertion loss is the measured change in power flux at a specified receiver, when the acoustic transmission path between it and the source is modified by the insertion of silencer element. Such measurements have clear and valid physical meaning particularly if the source impedance remains while the transmission path is altered. When the invarient condition is satisfied, the insertion loss is given by the ratio of the acoustic pressure in upstream to that in downstream of the silencer, and that of the particle velocity. The measurement is consisted of using an adaptation of the two microphone method to obtain the complex amplitude of the sound in upstream tube as well as in downstream tube of the silencer. Examples of the data, reduced and presented in terms of the pressure ratio and particle speed ratio, are compared with the theoretical calculations.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2000년도 추계학술대회 및 정기총회
• /
• pp.141-147
• /
• 2000

For miniaturization of electronic parts and higher productivity, part arrangement job of PCB(printed Circuit Board) has been replaced with complete automated facilities, and contribution which is concerned about this will be expanded continuously. Such part arrangement job of PCB could have lots of influences to entire productivity In this paper, effective grouping method of parts is suggested for the effective insertion path job of PCB concerning the constraints to the size of parts.

• 한국통신학회논문지
• /
• 제28권3A호
• /
• pp.179-184
• /
• 2003

본 논문에서는 ISM대역에서 수신경로의 격리도를 크게 송신경로의 삽입손실은 작게 하며 동시에 P1dB를 크게 하는 비대칭구조의 MMIC SPDT 스위치를 제안하였으며, 이를 ETRI에서 지원하는 IDEC MPW의 0.5㎛ GaAs MESFET으로 제작하였다. 이 SPDT 스위치 수신경로의 삽입손실은 3GHz에서 1.518dB, 5.75GHz에서 1.777dB이고, 격리도는 3GHz에서 38.474dB, 5.75GHz에서 29.125dB로 측정되었다. 그리고, 송신경로의 삽입손실은 3GHz에서 0.961dB, 5.75GHz에서 1.162dB이고, 격리도는 3GHz에서 23.259dB, 5.75GHz에서 16.632dB였다. 비대칭구조의 스위치는 대칭구조에 비하여 수신경로의 격리도가 3GHz에서 15.9dB, 5.75GHz에서 11.9dB 정도 개선되었으며, 삽입손실은 약 0.6dB 정도 증가하였다. 또한, SPDT 스위치 송신경로의 P1dB는 21.5dBm로 대칭구조에 비하여3.86dB 증가하였다.

• 대한치과의사협회지
• /
• 제34권1호통권320호
• /
• pp.62-63
• /
• 1996

• 대한전자공학회논문지SD
• /
• 제41권6호
• /
• pp.81-90
• /
• 2004

집적회로 시스템이 고집적화 됨에 따라, 연결선은 회로 전체 성능을 결정하는 중요한 요소가 되었다. 버퍼 삽입은 연결선의 성능 향상의 효과적인 방법이다. 하나의 신호선이 허용 범위를 넘는 전달지연시간을 가질 때, 우리는 하나 또는 그 이상의 버퍼를 삽입하여 지연시간을 줄일 수 있다. 이제까지 많은 연구들에서 하나의 신호선에 대해 버퍼를 삽입하는 방법을 개발하였으나, 우리는 여러 신호선에 동시에 버퍼 위치를 찾아 버퍼를 삽입하는 방법을 연구하였다 이 방법은 여러 개의 신호선에 버퍼를 삽입하는 위치를 찾는 어려움을 효과적인 방법을 이용하여 그 위치를 결정한다. 또한 본 연구에서는 fan-out이 여럿인critical path에 대해서도 버퍼 삽입으로 지연시간을 최적화하는 기술을 개발하였다. 이 방법은 Elmore Delay 모델을 이용하여 지연시간을 계산하고 각 신호선에 지연시간을 최적화 할 수 있는 버퍼를 결정한다.

• 조명전기설비학회논문지
• /
• 제18권4호
• /
• pp.155-159
• /
• 2004

본 논문은 마이크로 스트립 라인을 무선 랜(IEEE 802.11a, IEEE 802.11b, IEEE 802.llg)에 사용할 수 있는 SPDT FET 스위치를 설계하고 시뮬레이션 하였다. 특히 주파수에 따른 능동소자의 영향을 최소화하기 위하여 임피던스 변환회로를 적용하여 설계하였다. 이 SPDT스위치 수신경로의 삽입손실은 2(㎓)에서 4(㎓)까지 0.8(㏈)에서 1.462(㏈)를 나타내고 있으며, 4.7(㎓)에서 6.7(㎓)까지 1.26(㏈)에서 2.3(㏈)을 보이고, 격리도는 2[㎓)에서 6.7(㎓)의 대역에서 30(㏈)이하를 나타낸다. 그리고 송신경로에서의 삽입손실은 2(㎓)에서 4(㎓)까지 1.18(㏈)에서 2.87(㏈)를 나타내고 있으며, 4.7(㎓)에서 6.7(㎓)까지 0.625(㏈)에서 1.2(㏈)을 나타내고 있다. 격리도는 2(㎓)에서 6.7(㎓)의 대역에서 30(㏈)이하를 나타낸다

• 한국정보통신학회논문지
• /
• 제26권10호
• /
• pp.1567-1570
• /
• 2022

This paper, we presents a RF protection technique of antenna switch by improving the power handling capability in worst case environment mode for mobile phone applications without critical payment of circuit performances such as insertion loss, isolation and ACBV (AC breakdown voltage). By applying a additional capacitive path located in front of the antenna in cell-phone, it performs the effective reduction of input power in high voltage standing wave ratio (VSWR) condition. Under the all-path off condition which causes a high VSWR, it achieved 37.7dBm power handling level as high as 5.7dB compared to that of conventional one at 2GHz. In addition, insertion loss and isolation performances were 0.31dB and 42.72dB at 2 GHz, respectively which were almost similar to that of the conventional circuit. The proposed antenna switch was fabricated in 130nm CMOS SOI technology.