• Structural Engineering and Mechanics
• /
• 제10권5호
• /
• pp.505-516
• /
• 2000

This paper is a presentation of an experimental study about the elastic-partly plastic behavior of rectangular hollow steel pinned struts subjected to static cyclic axial loading and the evaluation of the compressive strength of retrofitted crooked struts. Retrofitting is achieved by welding stiffening plates along the webs of damaged struts. The material follows a quasi-kinematic hardening hysteresis path as observed from coupon tests. Test results are compared to those of an analytical model showing a good agreement for both standard and retrofitted struts. The comparison of different stiffener plate dimensions shows that more efficient strengthening is achieved by using long thin stiffeners rather than short thick ones.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.199-208
• /
• 1994

This paper proposes a delay fault test technique for ICs and PCBs with the boundary-scan architectures supporting ANSI/IEEE Std 1149.1-1990. The hybrid delay fault model, which comprises both of gate delay faults and path delay faults, is selected. We developed a procedure for testing delay faults in the circuits with typical boundary scan cells supporting the standard. Analyzing it,we concluded that it is impractical because the test clock must be 2.5 times faster than the system clock with the cell architect-ures following up the state transition of the TAP controller and test instruction set. We modified the boundary-scan cell and developed test instructions and the test procedure. The modified cell and the procedure need test clock two times slower than the system clock and support the ANSI/IEEE standard perfectly. A 4-bit ALU is selected for the circuits under test. and delay tests are simulated by the SILOS simulator. The simulation results ascertain the accurate operation and effectiveeness of the modified mechanism.

• 한국CDE학회논문집
• /
• 제6권3호
• /
• pp.174-183
• /
• 2001

This study proposes an improved genetic algorithm (GA) to derive solutions for facility layout problems having inner walls and passages. The proposed algorithm models the layout of facilities on a flour-segmented chromosome. Improved solutions are produced by employing genetic operations known as selection, crossover, inversion, mutation, and refinement of these genes for successive generations. All relationships between the facilities and passages are represented as an adjacency graph. The shortest path and distance between two facilities are calculated using Dijkstra's algorithm of graph theory. Comparative testing shows that the proposed algorithm performs better than other existing algorithm for the optimal facility layout design. Finally, the proposed algorithm is applied to ship compartment layout problems with the computational results compared to an actual ship compartment layout.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.58-65
• /
• 1999

The effect of specimen thickness on fatigue crack growth rate was studied. The objective of the present study is to investigate the effect of specimen thickness on the fatigue crack growth behavior at various stress intensity factor ranges and also the variation of material restance to fatigue crack growth. The fatigue crack growth resistance was treated as a spatial stochastic process, which varies randomly on the crack path, Compact tension specimens with a LT orientation for structural steel were used. All testing was done at a constant stress intensity level. The experimental data were analyzed for the size effect to determine the Weibull distributions of the material resistance.

• 대한조선학회지
• /
• 제9권2호
• /
• pp.33-42
• /
• 1972

This paper was studied on the behavior, crack formation and propagation of slip bands on low carbon steel which was heat-treated in three conditions in order to change metallic structure. The specimens were tested by rotating bending fatigue testing machine and also observed the variations of grains by microscope. From the test results it was clear that fatigue endurance limit and life of low carbon steel were more increased in contrast with the case that the grain size of specimen was more decreased. Slip bands developed at oil-quenched specimen and furnace-cooled specimen. Formed cracks in the first one or two grains below the surface were approximately "planar" type, there after they followed "wavy" type. It was also found that cracks at 30% higher stress than fatigue limit were usually developed inter-granular, and cracks at 12% higher stress than fatigue limit were propagated meandering path, partly trans- and partly inter-grandular.

• Journal of Information Processing Systems
• /
• 제10권1호
• /
• pp.69-80
• /
• 2014

The free distance of (n, k, l) convolutional codes has some connection with the memory length, which depends on not only l but also on k. To efficiently obtain a large memory length, we have constructed a new class of (2k, k, l) convolutional codes by (2k, k) block codes and (2, 1, l) convolutional codes, and its encoder and generation function are also given in this paper. With the help of some matrix modules, we designed a single structure Viterbi decoder with a parallel capability, obtained a unified and efficient decoding model for (2k, k, l) convolutional codes, and then give a description of the decoding process in detail. By observing the survivor path memory in a matrix viewer, and testing the role of the max module, we implemented a simulation with (2k, k, l) convolutional codes. The results show that many of them are better than conventional (2, 1, l) convolutional codes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.883-888
• /
• 2004

One of commercial rapid transits produces peculiar booming sound when passing through the slab-track tunnel. In order to analyze that tympanic membrane-pressing noise systematically, typical source-transfer path-response analysis was carried out. Considering the octave band of booming noise, work scope was confined to structure-borne noise analysis, especially the dynamic behaviour of railway tracks. Experimental modal analysis of railway tracks, composed of rail, rubber pad, sleeper, ballast, and ground were performed. The results shows that transversal bending modes of the rail are suspicious for the cause of the low band booming noise. Finite element analysis are made use of to match preceding experimental results, and plausible dynamic properties of track components are produced.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.865-871
• /
• 2018

The 3-way valve have been used as a valve for opening and closing the valve by the flow control in the pressure system of the cryogenic and high pressure environment. In this paper, numerical analysis and experimental study on fracture nipple of 3-way ultra high pressure valve applied to space launch vehicle was carried out. We have developed a 3-way valve numerical simulation modeler of cryogenic environment using commercial software ANSYS 18.2. As results of numerical analysis, optimum nipple condition was derived. In addition, a 3-way valve prototype was fabricated and the fracture test was performed and compared with the numerical analysis results.

• Asia pacific journal of information systems
• /
• 제17권2호
• /
• pp.1-28
• /
• 2007

The success of new product development is a key factor for getting competitive advantages. Marketing research has been investigating marketing capability, manufacturing technical capability, cross-functional integration, market knowledge competence, market orientation, and competitive environment as the key success factors of new product development. Recently, the role of IT infrastructure in enhancing new product advantage is assumed in the literature. However, the empirical studies on the role of IT infrastructure are lacking. The purpose of this study is to empirically exam the impacts of IT infrastructure on new product competitive advantage. In this study, IT infrastructure is conceptualized as the flexibility of IT infrastructure. Based on previous research, a conceptual model is established by incorporating the direct impact of IT infrastructure flexibility and its indirect impact through the key success factors on new product development. To empirically test the research model, data are surveyed from a pair of IS department and Marketing department of 92 consumer goods manufacturers. By employing PLS technique, the measurement reliability and reliability of research variables are tested and the path analysis is conducted to do the hypothesis testing. The path analysis shows that IT infrastructure flexibility has no direct effect on new product advantage, However, the indirect effect of IT infrastructure is found, which is mediated by marketing capability, manufacturing technical capability, cross-functional integration, and market orientation respectively. Hence, The flexible IT infrastructure increases cross-functional integration (H1), market orientation (H3), marketing capability (H5), and manufacturing technical capability (H6). All success factors of new product development excepts for competitive environment have a positive association with new product competitive advantages (from H10 to H14). Finally, the path from IT infrastructure flexibility to cross-functional integration, to market orientation, to market knowledge capability, and to new product advantage is found as the strongest path. These results indicate that the flexible IT infrastructure enhances information sharing with multiple departments and collaboration within a distributed innovation environment. The collaboration among departments positively affects the level of customer and competitor intelligence. The ability to obtain knowledge about customers and competitors makes firms to adapt to a changing environment quickly and to respond to customers' demands adequately. The flexible IT infrastructure also enhances the capability of organization to more rapidly respond to the changes in product design resulting in faster product development and reduced costs. In addition to, it enhances marketing capability by the two-way communications with customers and the analyses of various kinds of customer data. In brief, the finding of this study suggests that the flexible IT infrastructure allows many firms to pursue sustained new product competitive advantages. This study advances research on IT infrastructure in two important aspects. First, by Integrating marketing research and IS research, this study develops a conceptual model on the role of IT infrastructure in enhancing new product advantage. Second, it empirically finds the indirect impacts of IT infrastructure on new product advantage, which confirms the potential for the IS field to contribute to new product development research. The limitations of this study are also discussed to provide research directions for future research.

• 대한통합의학회지
• /
• 제9권4호
• /
• pp.291-298
• /
• 2021

Purpose: The Pedisole is a newly developed shoe-mounted wearable assessment system for analyzing balance and gait. This study aimed to determine the reliability and validity of the parameters provided by the system for static balance and gait analysis of healthy adults. Methods: This study included 38 healthy adults (22.4±1.9 years) with no history of injury in the lower limbs. All participants were asked to perform balance and gait tasks for undertaking measurements. For analysis of balance, both the smart Pedisole and Pedoscan systems were concurrently used to analyze the path length of the center of pressure (COP) and the weight ratio of the left and right for 10 s. Gait was measured using the smart Pedisole and GaitRite walkway systems simultaneously. The participants walked at a self-selected preferred gait speed. The cadence, stance time, swing time, and step time were used to analyze gait characteristics. Using the paired t-test, the intra-class coefficient correlation (ICC) was calculated for reliability. The Spearman correlation was used to assess the validity of the measurements. In total, data for balance from 36 participants and the gait profiles of 37 participants were evaluated. Results: There were significant differences between the COP path lengths (p<.050) derived from the two systems, and a significant correlation was found for COP path length (r=.382~.523) for static balance. The ICC for COP path length and weight ratio was found to be greater than .687, indicating moderate agreement in balance parameters. The ICC of gait parameters was found to be greater than .697 except for stance time, and there was significant correlation (r=.678~.922) with the GaitRite system. Conclusion: The newly developed smart insole-type Pedisole system and the related application are useful, reliable, and valid tools for balance and gait analysis compared to the gold standard Pedoscan and the GaitRite systems in healthy individuals.