• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.79-86
• /
• 2001

A method is presented for generating the path which significantly reduces residual vibration of the redundant, flexible robot manipulator in the presence of obstacles. The desired path is optimally designed so that the system completes the required move with minimum residual vibration, avoiding obstacles. The dynamic model and optimal path are effectively formulated and computed by using special moving coordinate, called VLCS, to represent the link flexibility. The path to be designed is developed by a combined Fourier series and polynomial function to satisfy both the convergence and boundary condition matching problems. The concept of correlation coefficients is used to select the minimum number of design variables. A planar three-link manipualtor is used to evaluate this method. Results show that residual vibration can be drastically reduced by selecting an appropriate path, in the presence of obstacles.

• Korean Journal of Remote Sensing
• /
• v.20 no.5
• /
• pp.289-305
• /
• 2004

Atmospheric correction of Landsat Visible and Near Infrared imagery (VIS/NIR) over aquatic environment is more demanding than over land because the signal from the water column is small and it carries immense information about biogeochemical variables in the ocean. This paper introduces two methods, a modified dark-pixel substraction technique (path--extraction) and our spectral shape matching method (SSMM), for the correction of the atmospheric effects in the Landsat VIS/NIR imagery in relation to the retrieval of meaningful information about the ocean color, especially from Case-2 waters (Morel and Prieur, 1977) around Korean peninsula. The results of these methods are compared with the classical atmospheric correction approaches based on the 6S radiative transfer model and standard SeaWiFS atmospheric algorithm. The atmospheric correction scheme using 6S radiative transfer code assumes a standard atmosphere with constant aerosol loading and a uniform, Lambertian surface, while the path-extraction assumes that the total radiance (L/sub TOA/) of a pixel of the black ocean (referred by Antoine and Morel, 1999) in a given image is considered as the path signal, which remains constant over, at least, the sub scene of Landsat VIS/NIR imagery. The assumption of SSMM is nearly similar, but it extracts the path signal from the L/sub TOA/ by matching-up the in-situ data of water-leaving radiance, for typical clear and turbid waters, and extrapolate it to be the spatially homogeneous contribution of the scattered signal after complex interaction of light with atmospheric aerosols and Raleigh particles, and direct reflection of light on the sea surface. The overall shape and magnitude of radiance or reflectance spectra of the atmospherically corrected Landsat VIS/NIR imagery by SSMM appears to have good agreement with the in-situ spectra collected for clear and turbid waters, while path-extraction over turbid waters though often reproduces in-situ spectra, but yields significant errors for clear waters due to the invalid assumption of zero water-leaving radiance for the black ocean pixels. Because of the standard atmosphere with constant aerosols and models adopted in 6S radiative transfer code, a large error is possible between the retrieved and in-situ spectra. The efficiency of spectral shape matching has also been explored, using SeaWiFS imagery for turbid waters and compared with that of the standard SeaWiFS atmospheric correction algorithm, which falls in highly turbid waters, due to the assumption that values of water-leaving radiance in the two NIR bands are negligible to enable retrieval of aerosol reflectance in the correction of ocean color imagery. Validation suggests that accurate the retrieval of water-leaving radiance is not feasible with the invalid assumption of the classical algorithms, but is feasible with SSMM.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.902-907
• /
• 2011

In this paper, we deal with performance evaluation of visual path following using 2D and 3D information. Visual path follow first teaches driving path by selecting milestone images then follows the same route by comparing the milestone image and current image. We follow the visual path following algorithm of [8] and [10]. In [8], a robot navigated with 2D image information only. But in [10], local 3D geometries are reconstructed between the milestone images in order to achieve fast feature prediction which allows the recovery from tracking failures. Experimental results including diverse indoor cases show performance of each algorithm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2437-2445
• /
• 1993

In this work, a new method is presented for generating the manipulator path which significantly reduces residual vibration under the torque constraints. The desired path is optimally designed so that the required movement can be achieved with minimum residual vibration. From the previous research works, the dynamic model had been established including both the link and the joint flexibilities. The performance index is selected to minimize the maximum amplitude of residual vibration. The path to be designed is developed by a combined Fourier series and polynomial function to satisfy both the convergence and boundary condition matching problems. The concept of correlation coefficients is used to select the minimum number of design variables, i.e. Fourier coefficients, the only ones which have a considerable effect on the reduction of residual vibration. A two-link Manipulator is used to evaluate this method. Results show that residual vibration can be drastically reduced by selecting an appropriate manipulator path to both of unlimited and torque-limited cases.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.4
• /
• pp.375-381
• /
• 2011

This paper deals with the improvement of visual path following through velocity variation according to the coordinate of feature points. Visual path follow first teaches driving path by selecting milestone images then follows the route by comparing the milestone image and current image. We follow the visual path following algorithm of Chen and Birchfield [8]. In [8], they use fixed translational and rotational velocity. We propose an algorithm that uses different translational velocity according to the driving condition. Translational velocity is adjusted according to the variation of the coordinate of feature points on image. Experimental results including diverse indoor cases show the feasibility of the proposed algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.4
• /
• pp.41-46
• /
• 2012

This paper suggested that the frequency adaptive antenna matching network design between AP and WLAN(Wireless Local Area Network) terminal for improving performance. The internet data service of the WLAN terminal is communicated through the AP and AP broadcasts the beacon signal including the assigned frequency channel. at that time the antenna matching network path is controlled beacon information after the WLAN terminal searching and synchronization a beacon information. and then the WLAN terminal communicate with AP. controlling the antenna matching network path according to channel information, The WLAN terminal is expected to improve RF output power and sensitivity performance. The VSWR(Voltage Standing Wave Ratio) performance of the designed antenna matching network is measured to about 1.1 ~ 1.2 and then it is operated by the channel information of the AP.

• Journal of KIISE:Databases
• /
• v.35 no.4
• /
• pp.356-367
• /
• 2008

As XML is gaining unqualified success in being adopted as a universal data representation and exchange format, particularly in the World Wide Web, the problem of querying XML documents poses interesting challenges to database researcher. Several structural XML query processing methods, including XISS and XR-tree, for past years, have been proposed for fast query processing. However, structural XML query processing has the problem of requiring expensive Join cost for twig path query Recently, sequence matching based XML query processing methods, including ViST and PRIX, have been proposed to solve the problem of structural XML query processing methods. Through sequence matching based XML query processing methods match structured queries against structured data as a whole without breaking down the queries into sub queries of paths or nodes and relying on join operations to combine their results. However, determining the structural relationship of ViST is incorrect because its numbering scheme is not optimized. And PRIX requires many processing time for matching LPS and NPS about XML data trees and queries. Therefore, in this paper, we propose efficient sequence matching method u sing the bottom-up query processing for efficient XML query processing. Also, to verify the superiority of our index structure, we compare our sequence matching method with ViST and PRIX in terms of query processing with linear path or twig path including wild-card('*' and '//').

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.527-529
• /
• 2006

In this paper, we find a robot's path using a Virtual Reality Modeling Language and overlay vision. For correct robot's path we describe a method for localizing a mobile robot in its working environment using a vision system and VRML. The robt identifies landmarks in the environment, using image processing and neural network pattern matching techniques, and then its performs self-positioning with a vision system based on a well-known localization algorithm. After the self-positioning procedure, the 2-D scene of the vision is overlaid with the VRML scene. This paper describes how to realize the self-positioning, and shows the overlap between the 2-D and VRML scenes. The method successfully defines a robot's path.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.9
• /
• pp.166-177
• /
• 1994

In this paper, an implemenation of on-line continuous recognizer for cursive Hangul handwriting is explained. For the Hangul recognition system, we propose a high speed string matching. The editing process in our proposed string matching is accomplished by single editing path. And the matching results are stored in a heap structure and we decide the user comfortibility of unceasing writing during recognition owing to the high speed matching. In the experimental result, a recongition rate of 86.36% at 1.75 second/character over 21,076 characters collected from 50 persons are abtained. And it is shown that the proposed recognition system is operated properly for the on-line recognition for cursive handwring between graphemes.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.259-262
• /
• 2003

In this paper, we studied the path determination algorithm of the guidance robot for the visually impaired. Using the guidance robot for the visually impaired, the visually impaired can go to the destination where they want without other's heir. The navigation path of the guidance robot for the visually impaired must be the optimal path not only the shortest but also the most safe, which is different from a shortest path for common people. GPS and electronic map are used for the location information of the visually impaired. We corrected the error by converting the coordinates of location information from GPS, which includes maximum several tens of meters error, to the coordinates of electronic map. Information such as simple path and direction to the destination is not enough because it may be different between a going path from the start to the destination and a coming path from the destination to the start as around environment. So, we added information which can be dangerous for the visually impaired such as driveway, sidewalk without braille blocks, crosswalk, stairs and overpass, each has weight value as dangerous degree, when matching the GPS information to the electronic map, enough large as 1:5,000 scale.