• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권1호
• /
• pp.30-40
• /
• 2002

A 2.45GHz double-balanced modified Gilbert-type CMOS up-conversion mixer design is introduced, where the PMOS current-reuse bleeding technique is demonstrated to be efficient in improving conversion gain, linearity, and noise performance. An LO buffer is included in the mixer design to perform single-ended to differential conversion of the LO signal on chip. Simulation results of the design based on careful modeling of all active and passive components are examined to explain in detail about the characteristic improvement and degradation provided by the proposed design. Two kinds of chips were fabricated using a standard $0.35\mu\textrm$ CMOS process, one of which is the mixer chip without the LO buffer and the other is the one with it. The measured characteristics of the fabricated chips are quite excellent in terms of conversion gain, linearity, and noise, and they are in close match to the simulation results, which demonstrates the adequacy of the modeling approach based on the macro models for all the active and passive devices used in the design. Above all the benefits provided by the current-reuse bleeding technique, the improvement in noise performance seems most valuable.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.124-133
• /
• 2017

In-vessel retention by passive external reactor vessel cooling under severe accident conditions is a viable approach for retention of radioactive core melt within the reactor vessel. In this study, a new and versatile coating technique known as "cold spray" that can readily be applied to operating and advanced reactors was developed to form a microporous coating on the outer surface of a simulated reactor lower head. Quenching experiments were performed under simulated in-vessel retention by passive external reactor vessel cooling conditions using test vessels with and without cold spray coatings. Quantitative measurements show that for all angular locations on the vessel outer surface, the local critical heat flux (CHF) values for the coated vessel were consistently higher than the corresponding CHF values for the bare vessel. However, it was also observed for both coated and uncoated surfaces that the local rate of boiling and local CHF limit vary appreciably along the outer surface of the test vessel. Nonetheless, results of this intriguing study clearly show that the use of cold spray coatings could enhance the local CHF limit for downward-facing boiling by > 88%.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2297-2310
• /
• 2022

A condensation heat transfer model is essential to accurately predict the performance of the passive containment cooling system (PCCS) during an accident in an advanced light water reactor. However, most of existing models tend to predict condensation heat transfer very well for a specific range of thermal-hydraulic conditions. In this study, a new correlation for condensation heat transfer coefficient (HTC) is presented using machine learning technique. To secure sufficient training data, a large number of pseudo data were produced by using ten existing condensation models. Then, a neural network model was developed, consisting of a fully connected layer and a convolutional neural network (CNN) algorithm, DenseNet. Based on the hold-out cross-validation, the neural network was trained and validated against the pseudo data. Thereafter, it was evaluated using the experimental data, which were not used for training. The machine learning model predicted better results than the existing models. It was also confirmed through a parametric study that the machine learning model presents continuous and physical HTCs for various thermal-hydraulic conditions. By reflecting the effects of individual variables obtained from the parametric analysis, a new correlation was proposed. It yielded better results for almost all experimental conditions than the ten existing models.

• Structural Engineering and Mechanics
• /
• 제82권3호
• /
• pp.283-294
• /
• 2022

An inerter is a passive mechanical element whose inertance can be thousands of times its own physical mass. This paper discusses the application of an inerter-based passive control system, termed rotational inertial double-tuned mass damper (RIDTMD), to mitigate human-induced floor vibrations. First, the acceleration frequency response function of the floor with an RIDTMD is first derived. It is then employed to determine the optimal design parameters of the RIDTMD using the extended fixed-points technique. Based on a theoretical analysis, design-oriented empirical functions are proposed for the RIDTMD optimal parameters, whose performance for floor vibration control is evaluated by numerical examples, in which three typical human-induced load types are considered: walking, jumping, and bouncing. The results indicate that the applicability and effectiveness of the RIDTMD for human-induced floor vibration control are robust for various load types, load frequencies, and floor natural frequencies. For the same mass ratio, the RIDTMD is better than the TMD in reducing the floor vibration amplitude and improving the effective frequency suppression bandwidth, and for the same vibration suppression effect, the mass of the RIDTMD is much lighter than that of the TMD.

• 한국미생물·생명공학회지
• /
• 제50권3호
• /
• pp.430-435
• /
• 2022

The infectious bursal disease (IBD) is a highly contagious and acute poultry disease caused by Birnavirus. However, the vaccination is the only disease prevention, but several factors impeded vaccine development. Thus, a need for time to develop a novel technique for managing and treating respiratory diseases in poultry birds. Passive immunization is a hope and a possible alternative used in birds to meet this need. The current research attempted to produce egg yolk-based polyclonal antibodies against the IBD virus. The benefits of IgY include ease of extraction, lack of reaction with mammalian Fc receptors, and low production cost. Commercial layers were immunized with inactivated IBD virus subcutaneously according to the treatment regimen. The eggs were gathered daily, and yolk antibodies were extracted with the ammonium sulfate precipitation technique. The use of an indirect hemagglutination test demonstrated that IgY was IBD-specific. Until the end of the experiment, the specific IgY immunoglobulins did not lose activity when stored at 4℃. The specific immunoglobulin (IgY) treated challenged birds were demonstrated 92% recovery in comparison to the control group. The study implies that the IBDV specific IgY is an easily prepared and rich source of antibodies and offers an alternative therapeutic agent to cure IBD-infected birds.

• 한국지반공학회논문집
• /
• 제23권2호
• /
• pp.47-60
• /
• 2007

해머나 중추 등의 순간가진원이나 진동기 등의 연속가진원을 사용하는 주동표면파기법에서는 저주파대역에서 충분한 에너지를 갖는 표면파를 얻기 어렵기 때문에, 종종 발생된 표면파의 가탐심도가 충분하지 못한 한계에 부딪힌다. 일반직인 가진원 장비로 발생되는 이러한 주동표면파의 한계는 심층지반구조를 파악할 수 없게 함으로써 지반의 정확한 지진응답해석을 어렵게 한다. 반면에 상시미동이나 주변잡음 등과 같은 수동가진원에 의해 발생된 수동표면파를 이용하면 저주파대역에서 충분한 에너지를 갖는 표면파를 얻을 수 있기 때문에 이러한 주동표면파의 단점을 극복하고 심층지반까지의 전단파속도 주상도를 얻을 수 있다. 수동표면파의 측정자료로부터 계산된 수동분산값의 신뢰도를 향상시키는 것은 보다 정확한 전단파속도 주상도를 얻기 위해 필수적이며, 수동분산값의 신뢰도를 향상시키기 위해선 수동분산값에 포함되는 계통오차에 대한 올바른 이해를 바탕으로 한 수동표면파의 측정과 분석이 필요하다. 본 논문에서는 수동표면파 시험에 있어 계통오차를 발생시키는 부족한 파수해상도와 측면로브를 통한 에너지누수에 관한 연구를 수행하고 신뢰성 있는 분산곡선 결정을 위한 수동표면파의 측정 및 분석기법을 제안한다. 제안된 기법을 적용한 일련의 수동표면파시험이 미국 캘리포니아주 산호세의 한 현장에서 수행되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.782-785
• /
• 2005

This article introduces technique to reduce harmonic by using the $5^{th}$ and $7^{th}$ harmonic tune filter and line reactor in the comparison to the technique of intervening firing method at the pulse of the 6-pulse phase-controlled converter in every 1/6 period. The design of the technique introduced in this article is to reduce the harmonic distortion of the current and the voltage resulted from three-phase thyristor phase-controlled converter. The waveform obtained from the experiment was analyzed on the spectrum of the current, voltage and the total harmonic distortion. The double firing method causes zero vectors of output voltage and input current. Designing the mechanism of the converter based on the idea of Park Vector Theory, the number of harmonic distortion in the intervening firing method were compared to those in normal firing method.

• 한국철도학회논문집
• /
• 제8권1호
• /
• pp.1-5
• /
• 2005

This paper has presented the parallel cyclic redundancy check (CRC) technique that performs CRC computation in parallel superior to the conventional CRC technique that processes data bits serially. Also, it has showed that the implemented parallel CRC circuit has been successfully applied to the inductively coupled passive RFTD system working at a frequency of 13.56㎒ in order to process the detection of logical faults more fast and the system has been verified experimentally. In comparison with previous works, the proposed RFID system using the parallel CRC technique has been shown to reduce the latency and increase the data processing rates about 15％ In the results. Therefore, it seems reasonable to conclude that the parallel CRC realization in the RFID system offers a means of maintaining the integrity of data in the high speed RFID system.

• Journal of Communications and Networks
• /
• 제6권2호
• /
• pp.147-155
• /
• 2004

In this paper, we propose an efficient sequencing technique, namely minimum Row time scheduling (MFTS), to manage variable-Iength message transmissions for single-hop passive starcoupled WDM optical networks. By considering not only the message length but also the state of the receivers and the tuning latency, the proposed protocol can reduce the average delay of the network greatly. This paper also introduces a new channel assignment technique latency minimizing scheduling (LMS), which aims to reduce the scheduling latency. We evaluate the proposed algorithm, using extensive discrete-event simulations, by comparing its performance with shortest job first (SJF) algorithm. We find that significant improvement in average delay could be achieved by MFTS algorithm. By combining the proposed message sequencing technique with the channel selection technique, the performance of the optical network could be further improved.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.384-389
• /
• 2011

The electric railway cars are operated by high voltage supply through the catenary wire. Also, numerous electric equipments operated by electric signal are distributed in the electric railway cars. Such electric equipments are exposed to EMI/EMC problems, and there is the possibility that the magnetic field due to the catenary wire current takes effect on the electromagnetic field in the electric railway cars which move under the catenary wire. There is the possibility that the electromagnetic interference generates in view of the operation of many electric equipments in the electric railway cars. There is the possibility that the communication device faults generate, and that the hazards on the human beings generate. In this paper, we predict the magnetic field around the catenary wire, and obtain the exact magnetic field distribution by comparing the analytic results and the numerical results. Finally, we confirmed the possibility of the passive loop mitigation by comparing the analytic results and the numerical results through the passive loop mitigation technique.