• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.65-70
• /
• 2006

A UHF band RFID passive tag antenna, which can be attached on metallic objects, is proposed. The proposed tag antenna is more insensitive to the size of the metallic object than conventional PIFAs or IFAs. It is constructed on a multi-layer and its size is reduced by using a 'L' slit. Performances of the antenna is analyzed by Ansoft's HFSS and measured using a back-scattering method. The simulated and measured data are obtained with varying the size of metallic object.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1681-1686
• /
• 1991

In robotics and other fields of engineering, techniques for artificial reality or virtual reality are focused on and studied extensively, e.g., virtual existence for tele-operator systems in robotics, and virtual reality of designed objects in architecture. In order to realize the system we should create physical stimulations according to internal models created by experiences in a human brain. The internal model does not have to have direct connections to the real world, however, the stimulation must be signals such that the internal model are retrieved in a human brain. In this paper we propose a technique for tele-virtual reality of dynamic mechanical models, which means that one dynamic mechanical model can be shared by peoples in distant places. Since a stability issue due to time delays arises in the system, we employed a scattering technique developed for a tele-operator system and a kind of passive adaptive controllers. Furthermore, restrictions due to a simple digital implementation of the scattering transformation are discussed and some conditions for stability are shown. The proposed method is applied to a remote tug of war system and the effectiveness is verified.

• ETRI Journal
• /
• v.22 no.1
• /
• pp.38-46
• /
• 2000

The extraction of model parameters for embedded passive components is crucial for designing and characterizing the performance of multichip module (MCM) substrates. In this paper, a method for optimizing the extraction of these parameters using genetic algorithms is presented. The results of this method are compared with optimization using the Levenberg-Marquardt (LM) algorithm used in the HSPICE circuit modeling tool. A set of integrated resistor structures are fabricated, and their scattering parameters are measured for a range of frequencies from 45 MHz to 5 GHz. Optimal equivalent circuit models for these structures are derived from the s-parameter measurements using each algorithm. Predicted s-parameters for the optimized equivalent circuit are then obtained from HSPICE. The difference between the measured and predicted s-parameters in the frequency range of interest is used as a measure of the accuracy of the two optimization algorithms. It is determined that the LM method is extremely dependent upon the initial starting point of the parameter search and is thus prone to become trapped in local minima. This drawback is alleviated and the accuracy of the parameter values obtained is improved using genetic algorithms.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.8-14
• /
• 2014

Brightness temperature spectra acquired from FTIR(Fourier Transform Infrared)-SCADS (Standoff Chemical Agent Detection System) could be available for detection and identification of the chemical agents and pollutants from different background. IR spectrum range of 770 to 1350 $cm^{-1}$ is corresponding to "atmospheric window". A 2-dimensional(2D) brightness temperature spectrum was drawn from combining each data point through automatic continuous scanning of FTIR along with altitude and azimuth. At higher altitude, temperature of background was decreased but scattering effect of atmospheric gases was increased. Increase in temperature difference between background and blackbody in SCADS at higher temperature causes to increases in peak intensity of $SF_6$. This approach shows us a possibility that 2D visual information is acquired from scanning data with a single FTIR-SCADS.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.794-801
• /
• 2017

In this paper, we proposed airborne target recognition using multi-channel combining method in DTV-based passive radar. By combining multi-channel signals, we obtained the HRRP with sufficient range resolution. HRRP was obtained by AR method or zero-padding. From the obtained HRRP, we extracted scattering centers by CLEAN algorithm using the gradient descent. We extracted feature vectors and performed target recognition after training neural network using the extracted feature vectors. To verify performance of proposed methods, we assumed frequency bands of three broadcasting transmitters operated in Korea(Mt. Gwan-ak, Mt. Yong-moon, Kyeon-wol-ak) and used full scale 3D CAD model of four targets. Also we compared the target recognition performance of the proposed method with that of using only single-channel of three broadcasting transmitters. As a result, proposed methods showed better performance than using only single-channel at three broadcasting transmitters.

• ETRI Journal
• /
• v.23 no.1
• /
• pp.23-32
• /
• 2001

Examination of the statistical variation of integrated passive components is crucial for designing and characterizing the performance of multichip module (MCM) substrates. In this paper, the statistical analysis of parallel plate capacitors with gridded plates manufactured in a multilayer low temperature cofired ceramic (LTCC) process is presented. A set of integrated capacitor structures is fabricated, and their scattering parameters are measured for a range of frequencies from 50 MHz to 5 GHz. Using optimized equivalent circuits obtained from HSPICE, mean and absolute deviation is calculated for each component of each device model. Monte Carlo Analysis for the capacitor structures is then performed using HSPICE. Using a comparison of the Monte Carlo results and measured data, it is determined that even a small number of sample structures, the statistical variation of the component values provides an accurate representation of the overall capacitor performance.

• Ceramist
• /
• v.10 no.3
• /
• pp.48-54
• /
• 2007

Glass-ceramics transparent above $10\;{\mu}m$ in the infrared, have been synthesized. They are based on germanium and antimony sulphides or selenides associated to alkali halides. They are prepared by heating glass samples at temperatures above the glass transition, as a function of time. Ceramisation can be controlled, so that sub-100 nm crystals are generated in the glass matrix. Then, low light scattering is achieved and the transparency window of the original glass is maintained. When gallium sulphide is added, glass ceramics can be doped with rare-earth ions. Emissions from the $^4F_{3/2}$ and $^4I_{13/2}$ of $Nd^{3+}$ and $Er^{3+}$ ions, respectively, are more intense in glass-ceramics, as compared to their vitreous counterpart. Examination of band profiles and decaytimes show that rare-earth ions are embedded in both crystalline and glassy environments.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.528-530
• /
• 2003

We present here, some of the studies carried for estimation of rainfall over land and oceanic regions in and around South Korea. We use active and passive microwave measurements from TRMM ? TMI and Precipitation Radar (PR) respectively during a typhoon even named ? RUSA that took place during 30 Aug. 2002. We have followed due approach by Yao at. all (2002) and examined the performance of their algorithm using two main predictor variable, named as Scattering Index (SI) and Polarization Corrected Brightness Temperature (PCT) while using TMI data. The rainfall fnus estimated using PST and SI shows some Underestimation as compared to the 2A25 rainfall products from the PR in common area of overlap. A larger database thus would be used in future. To establish a new rain rate algorithm over Korean region based on the present case study.

• Progress in Medical Physics
• /
• v.31 no.3
• /
• pp.99-110
• /
• 2020

With hope and concern, the first Korean proton therapy facility was introduced to the National Cancer Center (NCC) in 2007. It added a new chapter to the history of Korean radiation therapy. There have been challenging clinical trials using proton beam therapy, which has seen many impressive results in cancer treatment. Compared to the rapidly increasing number of proton therapy facilities in the world, only one more proton therapy center has been added since 2007 in Korea. The Samsung Medical Center installed a proton therapy facility in 2015. Most radiation oncology practitioners would agree that the physical properties of the proton beam provide a clear advantage in radiation treatment. But the expensive cost of proton therapy facilities is still one of the main reasons that hospitals are reluctant to introduce them in Korea. I herein introduce the history of proton therapy and the cutting edge technology used in proton therapy. In addition, I will cover the role of a medical physicist in proton therapy and the future prospects of proton therapy, based on personal experience in participating in proton therapy programs from the beginning at the NCC.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.201-203
• /
• 2004

We present here, some of the studies carried for estimation of rainfall over land and oceanic regions in and around South Korea. We use active and passive microwave measurements from TRMM - TMI and Precipitation Radar (PR) respectively during a typhoon even named - RUSA that took place during 30 Aug. 2002. We have followed due approach by Yao at. all (2002) and examined the performance of their algorithm using two main predictor variable, named as Scattering Index (SI) and Polarization Corrected Brightness Temperature (PCT) while using TMI data. The rainfall rate estimated using PCT and SI shows some under-estimation as compared to the AWS rainfall products from the PR in common area of overlap. A larger database thus would be used in future. To establish a new rain rate algorithm over Korean region based on the present case study.