• 대한물리의학회지
• /
• 제9권3호
• /
• pp.279-284
• /
• 2014

PURPOSE: This study intended to verify whether there was actual correlation between weight-bearing asymmetry and a limitation in hip joint rotation range in patients with low back pain. METHODS: Thirty five low back pain patients voluntarily participated this study. For each participant, hip joint medial rotation symmetry rate and the weight-bearing symmetry rate were calculated. The correlation between the two variables was investigated. RESULTS: A decrease in the left hip joint medial rotation range of motion (ROM) was observed more often than a reduction in the right hip joint medial rotation ROM. However, similar number between right and left side was observed in ground reaction force more weighted. The coefficient between the passive hip joint medial rotation symmetry rate and the weight loading symmetry ratio was -0.19 (p < 0.05). CONCLUSION: The present study demonstrated a weak correlation between the hip joint medial rotation ROM and the weight distribution of both feet. Such result suggests that careful evaluation by separating each element is needed in treating patients with low back pain. Future research should take into account asymmetric alignment and abnormal movement in different joints of the body as well as asymmetry in the bilateral hip joint rotation and the unilateral weight supporting posture.

• Nuclear Engineering and Technology
• /
• 제46권4호
• /
• pp.489-500
• /
• 2014

In this study, remote handling strategies for a large-scale argon cell facility were considered. The suggested strategies were evaluated by several types of field test. The teleoperation tasks were performed using a developed remote handling system, which enabled traveling over entire cell area using a bridge transport system. Each arm of the system had six DOFs (degrees of freedom), and the bridge transport system had four DOFs. However, despite the dexterous manipulators and redundant monitoring system, many operators, including professionals, experienced difficulties in operating the remote handling system. This was because of the lack of a strategy for handling the installed camera system, and the difficulty in recognizing the gripper pose, which might fall outside the FOV (field of vision) of the system during teleoperation. Hence, in this paper, several considerations for the remote handling tasks performed in the target facility were discussed, and the tasks were analyzed based on ergonomic factors such as the workload. Toward the development of a successful operation strategy, several ergonomic issues, such as active/passive view of the remote handling system, eye/hand alignment, and FOV were considered. Furthermore, using the method for classifying remote handling tasks, several unit tasks were defined and evaluated.

• PNF and Movement
• /
• 제6권1호
• /
• pp.53-60
• /
• 2008

Purpose : To describes the important aspects of knee joint movement and function used when applying PNF technique to the lower limb. Method : The knee was a very important roles in the lower limb movement and ambulation. This study summarizes the physiologic movement of knee to the PNF lower extremity patterns. Result : The tibiofemoral joint is usually described as a modified hinge joint with flexion-extension and axial rotation by two degrees of freedom movement. These arthrokinematics are a result of the geometry of the joints and the tension produced in the ligamentous structures. The patellofemoral joint is a sellar joint between the patella and the femur. Stability of the patellofemoral joint is dependent on the passive and dynamic restraints around the knee. In a normal knee the ligaments are inelastic and maintain a constant length as the knee flexes and extends, helping to control rolling, gliding and translation of the joint motions. Conclusions : It is important to remember that small alterations in joint alignment can result in significant alterations in patellofemoral joint stresses and that changes in the mechanics of the patellofemoral joint can also result in changes in the tibiofemoral compartments. Successful treatment requires the physical therapist to understand and apply these arthrokinematic concepts. When applied to PNF low extremity patterns, understanding of these mechanical concepts can maximize patient function while minimizing the risk for further symptoms or injury.

• 국제물리치료학회지
• /
• 제11권3호
• /
• pp.2102-2106
• /
• 2020

Background: Static hamstring stretching exercises have been widely used to improve flexibility of the hamstring muscles. However, few studies have examined the influence of standing static hamstring stretching (e.g., jack-knife stretching) on movements of the lumbopelvic-hip complex. Objectives: To examine the short-term effects of jack-knife stretching on movements of the lumbopelvic-hip complex. Design: Case series. Methods: Fourteen participants with hamstring tightness (8 male, 6 female) were recruited. Participants performed jack-knife stretching for 150 s. Before and after stretching, participants performed the finger-to-floor distance (FFD), sit and reach (SRT), active knee extension (AKE), passive straight leg raising (PSLA), and active straight leg raising (ASLR) tests as well as pelvic tilt while standing to identify the effects of stretching. Results: There were significant improvements in the FFD, SRT, AKE, PSLA, and ASLR tests after stretching. However, pelvic tilt angle while standing did not significantly change. Conclusion: Jack-knife stretching can be a useful exercise to improve flexibility of the hamstring muscles, but not pelvic alignment while standing.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.277-288
• /
• 2018

Wireless inductive power transfer (IPT) technology is used in many applications today. A compact and high-frequency primary side inverter is one of the most important parts of a WPT system. In this study, a modified class EF-type voltage-fed multi-resonant inverter has been proposed for WPT application at a frequency range of 85-100 kHz. Instead of an infinite input choke inductor, a resonant inductor is used to reduce loss and power density. The peak voltage stress across the MOSFET has been reduced to almost 60% from a class-E inverter using a passive clamping circuit. A simple yet effective design procedure has been presented to calculate the various component values of the proposed inverter. The overall system is simulated using MATLAB/SimPowerSystem to verify the theoretical concepts. A 500-W prototype was built and tested to validate the simulated results. The inverter exhibited 90% efficiency at nearly perfect alignment condition, and efficiency reduced gradually with the misalignment of WPT coils. The proposed inverter maintains zero-voltage switching (ZVS) during considerable load changes and possesses all the inherent advantages of class E-type inverters.

• Nuclear Engineering and Technology
• /
• 제49권3호
• /
• pp.459-465
• /
• 2017

The goal of this study is to evaluate the effective thermal conductivity and diffusivity of containment walls as heat sinks or passive cooling systems during nuclear power plant (NPP) accidents. Containment walls consist of steel reinforced concrete, steel liners, and tendons, and provide the main thermal resistance of the heat sinks, which varies with the volume fraction and geometric alignment of the rebar and tendons, as well as the temperature and chemical composition. The target geometry for the containment walls of this work is the standard Korean NPP OPR1000. Sample tests and numerical simulations are conducted to verify the correlations for models with different densities of concrete, volume fractions, and alignments of steel. Estimation of the effective thermal conductivity and diffusivity of the containment wall models is proposed. The Maxwell model and modified Rayleigh volume fraction model employed in the present work predict the experiment and finite volume method (FVM) results well. The effective thermal conductivity and diffusivity of the containment walls are summarized as functions of density, temperature, and the volume fraction of steel for the analysis of the NPP accidents.

• 대한족부족관절학회지
• /
• 제15권2호
• /
• pp.51-57
• /
• 2011

Pilon fractures involving distal tibia remain one of the most difficult therapeutic challenges that confront the orthopedic surgeons because of associated soft tissue injury is common. To introduce and describe the diagnosis, current treatment, results and complications of the pilon fractures. In initial assessment, the correct evaluation of the fracture type through radiographic checkup and examination of the soft tissue envelope is needed to decide appropriate treatment planning of pilon fractures. Even though Ruedi and Allgower reported 74% good and excellent results with primary open reduction and internal fixation, recently the second staged treatment of pilon fractures is preferred to orthopedic traumatologist because of the soft tissue problem is common after primary open reduction and internal fixation. The components of the first stage are focused primarily on stabilization of the soft tissue envelope. If fibula is fractured, fibular open reduction and internal fixation is integral part of initial management for reducing the majority of tibial deformities. Ankle-spanning temporary external fixator is used to restore limb alignment and displaced intraarticular fragments through ligamentotaxis and distraction. And the second stage, definitive open reduction and internal fixation of the tibial component, is undertaken when the soft tissue injury has resolved and no infection sign is seen on pin site of external fixator. The goals of definitive internal fixation should include absolute stability and interfragmentary compression of reduced articular segments, stable fixation of the articular segment to the tibial diaphysis, and restoration of coronal, transverse, and sagittal plane alignments. The location, rigidity, and kinds of the implants are based on each individual fractures. The conventional plate fixation has more advantages in anatomical reduction of intraarticular fractures than locking compression plate. But it has more complications as infection, delayed union and nonunion. The locking compression plate fixation provides greater stability and lesser wound problem than conventional implants. But the locking compression plate remains poorly defined for intraarticular fractures of the distal tibia. Active, active assisted, passive range of motion of the ankle is recommended when postoperative rehabilitation is started. Splinting with the foot in neutral is continued until suture is removed at the 2~3 weeks and weight bearing is delayed for approximately 12 weeks. The recognition of the soft tissue injury has evolved as a critical component of the management of pilon fractures. At this point, the second staged treatment of pilon fractures is good treatment option because of it is designed to promote recovery of the soft tissue envelope in first stage operation and get a good result in definitive reduction and stabilization of the articular surface and axial alignment in second stage operation.

• 한국전문물리치료학회지
• /
• 제13권2호
• /
• pp.77-84
• /
• 2006

Although conservative management of congenital muscular torticollis (CMT) has been well documented, relatively little is known about the response to the treatment. The purposes of this case report were to describe the use of a therapeutic approach based on motor development in physical therapy intervention for an infant with CMT and to report the result of the treatment. The patient was a 20-day-old baby boy with left CMT presenting muscular mass in the left sternocleidomastoid muscle. The angle of the lateral head tilt was 20 degrees. The size of muscular mass was 5.3 mm in ultrasonography. Intervention included ultrasonic therapy, soft tissue massage, passive and active range of motion exercises, motor developmental therapy, and parent instruction. The procedures of motor developmental therapy and changes in the amount of lateral head tilt were documented using photography. The size of the mass was decreased to .3 mm before the 5-month follow-up. The patient also maintained a midline head position in the supine position and a midline head alignment during all functional activities. A therapeutic approach based on motor development is a beneficial method for reducing an asymmetrical head and neck position, and facilitating normal development as a component of physical therapy intervention.

• 패션비즈니스
• /
• 제18권1호
• /
• pp.182-198
• /
• 2014

The main purposes of this study is to evaluate clothing behaviors according to cosmetic surgery parts and to research how the clothing style preference is expressed depending on each clothing behavior group. This study focuses on women in their 20s and 30s living in Seoul and Gyeonggi area whom have cosmetic surgery experiences. From the women being evaluated, the following groups are divided and then surveyed with equal frequency and ratio: 'facial surgery', 'face contour surgery', 'breast surgery', and 'body figure revision'. When comparing the changes in clothing style preferences before and after the cosmetic surgery, they prefer silhouettes which show body shapes, diversity of color tones, and more overall exposing preferences. After investigating the preferred clothing styles based on cosmetic surgery parts, it is being analyzed that body exposure is more aggressively expressed upon after taking the surgery because the self satisfaction is increased according to the changes in their body shapes after the surgery. Lastly, after looking into the cosmetic surgery and the clothing preferences styles of each clothing behavior group, there seems to be more breast surgeries and body figure revisions for aggressive and extroverted characters: the sex-appeal and mood switching type. It is also being analyzed that facial surgeries are more common in the passive group: information collection, trend alignment, and beauty preference. Such results are also reflected in clothing preferences styles: the biggest change is shown in the aggressive and extroverted group, the sex-appeal types.