• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2915-2923
• /
• 2022

There is an increasing interest in passive safety systems to minimize the need for operator intervention or external power sources in nuclear power plants. Because a passive system has a weak driving force, there is greater uncertainty in the performance compared with an active system. In previous studies, several methods have been suggested to evaluate passive system reliability, and many of them estimated the failure probability using thermal-hydraulic analyses and the Monte Carlo method. However, if the functional failure of a passive system is rare, it is difficult to estimate the failure probability using conventional methods owing to their high computational time. In this paper, a procedure for the application of the Chernoff bound to the evaluation of passive system reliability is proposed. A feasibility study of the procedure was conducted on a passive decay heat removal system of a micro modular reactor in its conceptual design phase, and it was demonstrated that the passive system reliability can be evaluated without performing a large number of thermal-hydraulic analyses or Monte Carlo simulations when the system has a small failure probability. Accordingly, the advantages and constraints of applying the Chernoff bound for passive system reliability evaluation are discussed in this paper.

• Korean Journal of Materials Research
• /
• v.32 no.4
• /
• pp.230-236
• /
• 2022

The formation behavior of a passive state film on the surface of STS304 in electrolytic solution was analyzed to determine its metallic ion composition. The properties of passive state films vary depending on the Fe and Cr ions in the electrolytic solution. It was observed that the passive state film surface became flat and glossy as the concentration of Fe and Cr ions in the electrolytic solution increased. The corrosion resistance property of the passive state film was proportional to the amount of Fe and Cr in the electrolytic solution. An initial passive state film with high Fe concentration was formed on the surface of STS304 during early electrolytic polishing. Osmotic pressure of Fe ions occurs between the passive state film and electrolytic solution due to the Fe ion concentration gradient. The Fe in the passive state film is dissolved into the electrolyte, and Cr fills up the Fe ion vacancies. As a result, a good corrosion-resistant floating film was formed. The more Fe ions in the electrolytic solution, the faster the film is formed, and as a result, a flat passive state film containing a large amount of Cr can be formed.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.112-114
• /
• 1998

The passive system requires RF-DC converter. RF-DC converter, which is used in microwave region, is more affected by parasitic elements than used in low frequency region. So it is difficult to make the converter. RF-DC converter usually consists of resonator, shottky diode, capacitor, voltage regulator. In this study, we used the rechargeable battery instead of capacitor. If any passive transponder requires more power than general transponder, battery tech of this components is important to apply for the passive system. In this paper, passive transponder, which requires more power than general passive transponder, is presented and compared to general passive transponder.

• Cross-Cultural Studies
• /
• v.47
• /
• pp.217-240
• /
• 2017

This paper is based on a comparative analysis of the Korean act subject marks '-에게(한테), -로, -에' and Chinese passive marks '被[$b{\grave{e}}i$]/?[$r{\grave{a}}ng$]/叫[$ji{\grave{a}}o$]/?[$g{\check{e}}i$]'. Each distribution's aspects and characteristics were examined and corresponding relationships were analyzed by comparison of these forms. The method of this comparative analysis focused on three aspects such as tangible characteristics of the two languages, selective restrictions on the 'act subject' or 'passive subject' in the passive expression, and constraints on the use of the act subject (passive) marks in the Korean passive expression by '받다'. In this comparative analysis Korean act subject markers '-에게(한테), -로, -에' and Chinese passive markers '被/?/叫/?' are always as an adverb in passive expression in combination with the act subject. Despite this common point, some differences were revealed relative to the use of the two languages. First, we reveal that the 'act subject' and the conjoined manner follow the passive expression according to characteristics of the two languages. In addition, the act subject marks of Korean passive expressions '에게/한테, -에/로' only serve as an investigative role. They are limited only to [${\pm}animate$] of the act subject. But Chinese passive markers '被/?/叫/?' are often restricted by [${\pm}animate$] of passive subject, existence and non-existence of act subject. In the Korean passive expression by '받다', it is used as act subject marks '에게/한테, -에/로' but the Chinese passive marks are restricted by the meaning of lexical items in a sentence.

• Corrosion Science and Technology
• /
• v.2 no.5
• /
• pp.212-218
• /
• 2003

Electronic properties of passive films formed on Ti at film formation potentials $(E_f)V_{SCE}$ in pH 8.5 buffer solution and in an artificial seawater were examined through the photocurrent measurement and Mott-Schottky analysis. The passive films formed on Ti in pH 8.5 buffer solution exhibited a n-type semiconductor with a band gap energys $(E_g);E_g^{n=2}=3.4$ eV for nondirect electron transition, and $E_g^{n=0.5}=3.7$ eV for direct electron transition. These band gap values were almost same as those for the passive films formed in artificial seawater, indicating that chloride ion ($Cl^-$ in solution did not affect the electronic structure of the passive film on Ti. $E_g$ for passive films formed on Ti were found to be greater than those ($E_g^{n=0.5}=3.1$ eV, $E_g^{n=2}=3.4$) for a thermal oxide film formed on Ti in air at $400^{\circ}C$. The disorder energy of passive film, determined from the absorption tail of photocurrent spectrum, was much greater than that for the thermal oxide film farmed on Ti in air at $400^{\circ}C$. The greater $E_g$ and the higher disorder energy for the passive film compared with those for the thermal oxide fIlm suggest that the passive film on Ti exhibited more disorded structure than the thermal oxide film. The donor density (about $2.4{\times}10^{20}cm^{-3}$) for the passive film formed in artificial seawater was greater than that (about $20{\times}10^{20}cm^{-3}$) formed in pH 8.5 buffer solution, indicating that $Cl^-$ increased the donor density for the passive film on Ti.

• Tunnel and Underground Space
• /
• v.14 no.6 s.53
• /
• pp.411-422
• /
• 2004

Sinkhole subsidence occurs over abandoned mine workings and can be detrimental to human lives, damage to properties and other surface structures. In this study, simulation of sinkhole development process is performed using special finite element procedure. Especially, creation of mine voids due to roof falls and generation of goaf from broken rocks are simulated using active-passive-active finite elements. An active or solid element can be made passive or void once the tensile failure criterion is satisfied in the specified sinkhole formation zone. Upon completion of sinkhole development process, these passive elements in again be made active to simulate goal region. Several finite element models are analyzed to evaluate the relationships between sinkhole formation with width of gallery. depth of mine, roof condition and bulking factor of roof rocks. This study demonstrates that the concept of passive elements in numerical analysis can be used effectively for analyzing sinkhole formation or roof fall phenomenon in general.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.1
• /
• pp.91-98
• /
• 2000

Objectives : This study is to evaluate the awareness, attitude, practice and the countermeasures against passive smoking in Korean adults. Methods : By self-administered questionnaires, we assessed the knowledge, attitude, behavior for passive smoking and the countermeasure for reduction of it's harmful effects in 289 men and 238 women. Results : The subjects that have heard about passive smoking were 96.8% in total and well known were 26.4% of current smoker, 56.6% of ex-smoker, and 14.8% of non-smoker(p=0.001). The irritative symptom from passive smoking was the most frequent in non-smokers and the most common place where exposed to passive smoking was public place. For attitude against passive smoking in 'no smoking allowed area', ex-smokers were the most active to recommend to stop smoking. And for opinion about establishment of 'no smoking allowed area', the restriction by law was the best acceptable method in smokers, exsmokers, and nonsmokers. In marking of 'no smoking allowed area', 69.9% of smokers answered no smoking, but in non-marking area only 6.3% stop smoking. When smokers were recommended to stop smoking, the more subjects stop smoking with good feeling in marking area, but the less in non-marking area. The factor associated the high awareness of passive smoking were aged(OR=1.07, 1.03-1.12), men(OR=4.34, 2.32-8.46). The persons who have known well about passive smoking had good attitude and behavior to prevent of harmful effect of passive smoking. Conclusions : This study suggested that education program would be necessary to reduce the passive smoking.

• Structural Engineering and Mechanics
• /
• v.37 no.4
• /
• pp.443-458
• /
• 2011

An extensive numerical investigation on the magnetorheological (MR) damper-based smart passive control system for mitigating vibration of stay cables under wind loads has been conducted. The smart passive system is incorporated with an electromagnetic induction (EMI) device for reducing complexity of the conventional MR damper based semi-active control system by eliminating an external power supply part and a feedback control part (i.e., sensors and controller). In this study, the control performance of the smart passive system has been evaluated by using a cable structure model extracted from a full-scale long stay cable with high tension. Numerical simulation results of the proposed smart damping system are compared with those of the passive and semi-active control systems employing MR dampers. It is demonstrated from the results that the control performance of the smart passive control system is better than those of the passive control cases and comparable to those of the semi-active control systems in the forced vibration analysis as well as the free vibration analysis, even though there is no external power source in the smart passive system.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1431-1441
• /
• 2017

The Fukushima accident reveals the vulnerability of existing active nuclear power plant (NPP) design against prolonged loss of external electricity events. The passive safety system is considered an attractive alternative to cope with this kind of disaster. Also, the passive safety system enhances both the safety and the economics of NPPs. The adoption of a passive safety system reduces the number of active components and can minimize the construction cost of NPPs. In this paper, reflecting on the experience during the development of the APR+ design in Korea, we propose the concept of an innovative Power Reactor (iPower), which is a kind of passive NPP, to enhance safety in a revolutionary manner. The ultimate goal of iPower is to confirm the feasibility of practically eliminating radioactive material release to the environment in all accident conditions. The representative safety grade passive system includes a passive emergency core cooling system, a passive containment cooling system, and a passive auxiliary feedwater system. Preliminary analysis results show that these concepts are feasible with respect to preventing and/or mitigating the consequences of design base accidents and severe accidents.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2493-2503
• /
• 2018

Passive dynamic walking exhibits humanoid and energy efficient gaits. However, optimal design of passive walker at multi-variable level is not well studied yet. This paper presents a Chaotic Particle Swarm Optimization (CPSO) algorithm and applies it to the optimal design of flexible passive walker. Hip torsional stiffness and damping were incorporated into flexible biped walker, to imitate passive elastic mechanisms utilized in human locomotion. Hybrid dynamics were developed to model passive walking, and period-one gait was gained. The parameters global searching scopes were gained after investigating the influences of structural parameters on passive gait. CPSO were utilized to optimize the flexible passive walker. To improve the performance of PSO, multi-scroll Jerk chaotic system was used to generate pseudorandom sequences, and chaotic disturbance would be triggered if the swarm is trapped into local optimum. The effectiveness of CPSO is verified by comparisons with standard PSO and two typical chaotic PSO methods. Numerical simulations show that better fitness value of optimal design could be gained by CPSO presented. The proposed CPSO would be useful to design biped robot prototype.