• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.123-127
• /
• 2005

The numerical analyses of the complicated flows are widely attempted in these days. Because of the enormous demanding memory and calculation time, parallel processing is used for these problems. In order to obtain calculation efficiency, it is important to choose proper domain decomposition technique and numerical algorithm. In this research we enhanced the efficiency of the CFDS code developed by ADD, using parallel computation and newly developed numerical algorithms. For the huge amount of data transfer between blocks non-blocking method is used, and newly developed data transfer algorithm is used for non-aligned block interface. Recently developed RoeM scheme is adpoted as a spatial difference method, and AF-ADI and LU-SGS methods are used as a time integration method to enhance the convergence of the code. Analyses of the flows around the ONERA M6 wing and the high angle of attack missile configuration are performed to show the efficiency improvement.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2236-2249
• /
• 2004

The analysis for the three-dimensional fluid flow past tube banks arranged in equilateral-triangular form at Re$\_$max/=4,000 is carried out using a large eddy simulation technique. The governing equations for the mass and momentum conservation are discretized using the finite volume method. Parallel computational techniques using MPI (Message Passing Interface) are implemented in the present computer code. The computation time decreases linearly proportional to the number of used CPUs in the present parallel computation. We obtained the time-averaged streamwise and cross-streamwise velocities and turbulent intensities. The present numerical results are compared with the PIV experimental data and agree generally well with the experimental data.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.93-96
• /
• 2005

In this study, Mock-up was manufactured using recycled aggregate concrete and then analyzed with respect to physical properties. Finally, the applicability of recycled aggregates as constructional aggregates was reviewed by practically putting recycled aggregates concrete into construction. Right after mixing, the slump of recycled-aggregates concrete showed decreased slump as time goes by because the surface mortar of recycled aggregates absorbed the mix water with time passing. The air contents of recycled-aggregates concrete overall increase a little due to the effect of surface mortar of the aggregates. For strengths, the strengths of recycled aggregate concrete tended to decrease from the proportion of 30$\%$ to 100$\%$.

• Journal of Communications and Networks
• /
• 제16권4호
• /
• pp.436-446
• /
• 2014

The high intensity of research and modeling in fields of mathematics, physics, biology and chemistry requires new computing resources. For the big computational complexity of such tasks computing time is large and costly. The most efficient way to increase efficiency is to adopt parallel principles. Purpose of this paper is to present the issue of parallel computing with emphasis on the analysis of parallel systems, the impact of communication delays on their efficiency and on overall execution time. Paper focuses is on finite algorithms for solving systems of linear equations, namely the matrix manipulation (Gauss elimination method, GEM). Algorithms are designed for architectures with shared memory (open multiprocessing, openMP), distributed-memory (message passing interface, MPI) and for their combination (MPI + openMP). The properties of the algorithms were analytically determined and they were experimentally verified. The conclusions are drawn for theory and practice.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2419-2422
• /
• 2000

A distributed real-time system that is being used now is usually divided into three level : higher level, middle level, and lower level. The higher level network is usually called an information network, the middle level is called a control network, and the lower level is called a field network or a divice network. This dissertation suggests and implements a middle level network which is called PICNET-NP (Plant Implementation and Control Network for Nuclear Power Plant). PICNET-NP is based partly on IEEE 802.4 token-passing bus access methed and partly on IEEE 802.3 physical layer. For this purpose a new interface, a physical layer service translater, is introduced. A control network using this method is implemented and applied to a distributed real-time system.

• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.88-95
• /
• 2007

TCN(Train Communication Network) adopts the master/slave protocol to implement real-time communication. In this network, a fault on the master node, cased by either hardware or software failure, makes the entire communication impossible over TCN. To reduce fault detection and recovery time, this paper propose the contention based mastership transfer algorithm. Slave nodes detect the fault of master node and search next master node using the proposed algorithm. This paper also shows the implementation results of a SoC-based Fault-Tolerant MVB Controller(FT-MVBC) which includes the fault-detect-logic as well as the MVB network logic to verify this algorithm.

• 대한산업공학회지
• /
• 제25권2호
• /
• pp.150-161
• /
• 1999

This paper deals with the design and development of a real-time integrated communication architecture for heterarchical SFCS(Shop Floor Control System). In autonomous agent-based heterarchical SFCS, each functional unit of parts and resources is equipped with an intelligent controller (agent) that acts as the representative of the entity. The controllers communicate and negotiate with other controllers on a real-time basis through message passing and bidding protocol to achieve mutual agreements for task sharing. ICPL(Integrated Communication Protocol and Language) is proposed for this purpose. ICPL is a language and a protocol for supporting communication among intelligent controllers. Based on the speech act theory, this paper proposes a semantic description for ICPL that associates the description of the cognitive states of controllers with the use of language primitives (message_type). Semantics for the basic set of ICPL messages is described. Eventually, an ICPL-based communication architecture can provide the implementation of the distributed and heterarchical SFCS, and makes the intelligent controller transparent to the negotiation problem.

• 대한기계학회논문집B
• /
• 제26권2호
• /
• pp.219-226
• /
• 2002

This paper is concerned with the effects of periodically approaching upstream wakes on cascade-flow and loss. The reduced frequency of the periodic wakes was varied in the narrow range from 0.5 to 0.7 Corresponding to a wake-passing through the cascade, two velocity deficits appeared near the boundary layer contour in the downstream from about 60% chord-length. The first velocity deficit was caused by a periodic wake and the second one appeared after some delayed time. The second velocity deficit was interpreted as the results of reattachment of flow-separation. The higher reduced frequency decreased the duration time of separation appearance and the lesser losses of blade were resulted.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.106-112
• /
• 2000

Axial fans are widely used in heavy machines due to their ability to produce high flow rate for cooling of engines. At the same time. the noise generated by these fans causes one of the most serious problems. This work is concerned with the low noise technique of discrete frequency noise. The prediction model. which allowed the calculation of acoustic pressure at the blade passing frequency and it's harmonics. has been developed by Farrasat. This theory is founded upon the acoustic radiation of unsteady forces acting on blade. To calculate the unsteady resultant force over the fan blade. Time-Marching Free-Wake Method are used. The fan noise of fan system having unsymmetric engine-room is predicted. In this paper, the discussion is confined to the performance and discrete noise of axial fan and front part of engine room in heavy equipments.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 추계 학술발표회 논문집
• /
• pp.143-148
• /
• 1999

A distributed real-time system that is being wed now is usually divided into three level : higher level, middle level, and lower level. The higher level network is usually called an information network, the middle level is called a control network, and the lower level is called a field network or a divice network. This dissertation suggests and implements a middle level network which is called PICNET-NP (Plant Implementation and Control Network for Nuclear Power Plant). PICNET-NP is based partly on IEEE 802.4 token-passing bus access method and partly on IEEE 802.3 physical layer. For this purpose a new interface, a physical layer service translator, is introduced. A control network using this method is implemented and applied to a distributed real-time system.