• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.59-67
• /
• 2020

In this study, a suitable algorithm for each BRT stop type is presented through the network construction and algorithm design effect analysis through the LISA, a traffic signal program, for the BRT stop type in the BRT Design Guidelines, Ministry of Land, Transport and Maritime Affairs, 2010.6. It was. The phase insert technique is the most effective method for the stop before passing the intersection, the early green technique for the stop after the intersection, and the extend green technique for the mid-block type stop. The extension green technique is used only because it consists of BRT vehicles, general vehicles and pedestrians. Analyzed. After passing through the intersection, the stop was analyzed as 56.4 seconds for the total crossing time and 29.8 seconds for the delay time. In the mid-block type stop, the total travel time of the intersection was 40.5 seconds, the delay time was 9.6 seconds, the average travel time of up and down BRT was 70.2 seconds, the delay time was 14.0 seconds, and the number of passages was 29.

• Journal of Acupuncture Research
• /
• v.22 no.5
• /
• pp.11-20
• /
• 2005

Objectives : The purpose of this study was to compare differences in bowel movement in women who had an abdominal hysterectomy and were treated for 10 minutes with San Yin Jiao (SP6) acupressure at three different time periods. Methods : The design was a nonequivalent control group non-synchronized post test only design. The participants included 123 women, 30 in experimental group 1 (post anesthesia 30 min), 22 in the experimental group 2 (post anesthesia 4 hours), 23 in experimental group 3 (Post anesthesia 24 hours), and 48 in a control group. Data were collected using a structured questionnaire consisting of general characteristics, self reported time when gas was first passed. Differences in the time when first gas was passed among four groups were analyzed using ANOVA. Results : There was no a statistical difference among the 4 groups for the time when gas was first passed. Conclusion : It is necessary to replicate the study with sonographic data for bowel movement.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.2
• /
• pp.155-165
• /
• 1994

In this study, the following factors are investigated from experiments for a vertical parallel plate heat exchanger under the frosting condition ; the growth of frost layer, the characteristics of heat and mass transfer, the change of mass flow rate of the air passing through the heat exchanger, and the pressure drop of the air in the heat exchanger. The amount of heat and mass flux of water vapor transferred from the air stream to the heat exchanger surface is large at the early stage of frosting and then decreases dramatically, and the extent of decreasing rate becomes moderate with time. The frost layer formed near the inlet of the heat exchanger is thicker and denser than that formed near the outlet. It is found that the gradient of the amount of frost along the flow direction increases with time. In the early period of frost formation, the thermal resistance between the air and the cooling plate increases dramatically and then the extent of change decreases with time. Initially the convective thermal resistance is dominant. Then, while the convective thermal resistance decreases with time, the conductive thermal resistance continues to increase with time and finally the conductive thermal resistance becomes dominant.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.661-667
• /
• 2001

This paper is concerned with the effects of periodically approaching upstream wakes on cascade-flow and loss. The reduced frequency of the periodic wakes was varied in the narrow range from 0.5 to 0.7. According to a wake-passing through the cascade, two velocity deficits appear near the boundary layer contour in the downstream from about 60% chord-length. The first velocity deficit is caused by a periodic wake and the second one appears after some delayed time. The second velocity deficit may be interpreted as the results of reattachment of flow-separation. The higher reduced frequency decreases the duration time of separation appearance and the lesser loss of aerofoil is resulted.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.830-833
• /
• 2004

Hydraulic structures have been constructed with low cost concrete so as to increase the investment efficiency. But, it has caused to produce structures having excess internal voids inside concrete. As the construction of agricultural irrigation and drainage project is concentrated on off-farming season and scattered in wider area, variation of quality of structures is big and it caused increase of internal voids. Due to that reason, hazardous substance is passing rather freely through the voids causing occur of crack and accordingly life time of structures is getting shortened. It is necessary to make a thesis of design criteria for design strength to increase life time, range of variation of quality, strength of ready-mixed concrete proper to design strength, and water-cement ratio and air content.

• Journal of information and communication convergence engineering
• /
• v.15 no.3
• /
• pp.187-192
• /
• 2017

Autonomous driving vehicle research demands complex road and lane understanding such as lane departure warning, adaptive cruise control, lane keeping and centering, lane change and turn assist, and driving under complex road conditions. A fast and robust road lane detection subsystem is a basic but important building block for this type of research. In this paper, we propose a method that performs road lane detection from black box input. The proposed system applies Random Sample Consensus to find the best model of road lanes passing through divided regions of the input image under HSV color model. HSV color model is chosen since it explicitly separates chromaticity and luminosity and the narrower hue distribution greatly assists in later segmentation of the frames by limiting color saturation. The implemented method was successful in lane detection on real world on-board testing, exhibiting 86.21% accuracy with 4.3% standard deviation in real time.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.73-80
• /
• 1993

In this study, 3-dimensional linear and non-linear vehicle models are proposed to improve ride quality. The simulations of a vehicle passing over a bump were performed with those two vehicle models. The dynamic responses of the models were analyzed in time-domain and frequency-domain. Then, discomforts in each vibration axis and the combined-axes were evaluated based on the vibrations of the proposed models. The actual vehicle test results in time domain and frequency domain. Also, the discomfort values were compared. Then the validity of those two models were verified. Also, the design parameters of the suspension system are proposed for improving the ride quality.

• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.143-149
• /
• 2016

In this study, a series of numerical simulation of dam break flow was conducted using EFDC model, and input conditions including cell size, time step, and turbulent eddy viscosity were considered to analyze parameter sensitivity. In case of coarse mesh layout, the propagated length of the shock wave front was ${\Delta}_x$ longer than that of other mesh layouts, and the velocity results showed jagged edge, which can be cured by applying fine grid mesh. Turbulent eddy viscosity influenced magnitude of the maximum velocity passing through gate up to 20% and the cell Peclet number less than 2.0 ensured no numerical oscillations.

• 보존과학연구
• /
• s.21
• /
• pp.273-291
• /
• 2000

The perilla oil is painted to the wooden cultural properties of protection of wood and pigment. But that is happened to discolor and gather mold because of the long drying time. So we were put to the test for the improvement of this matter. The result is follows;1. The perilla oil, do not parched domestic Perilla japonica, add to the Japanese acid clay, later passing through the filter paper that the pore size is less than $7\mum$ 2. If the perilla oil add to the antiseptic of Thiazole origin, the mold is suppressed.3. In the painting of perilla oil, the existing Dan-chung paints one time (Luster generation in the more than two times) and the non-existing Dan-Chung paints two times.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.5
• /
• pp.584-593
• /
• 2007

BACnet is a standard data communication protocol especially designed for building automation and control networks. BACnet uses the Master-Slave/Token-Passing (MS/TP) protocol as one of its field-level networks. In this study, the performance of the BACnet MS/TP protocol is evaluated using an experimental model. The network performance is investigated and evaluated in terms of token rotation time and round trip time. The experimental results show that the performance of the MS/TP network is heavily influenced by the network traffic load, the assignment of MS/TP node address and the network configuration parameter called $N_{max_info-frames}$. Based on the experimental results, simple practical designing guidelines for BACnet MS/TP network systems are also proposed.