• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제3권1호
• /
• pp.105-111
• /
• 2003

This paper is researching the storing of 40 different kinds of conditions. Such as, car speed, delay in starting time and the volume of cars in traffic. Through the use of a central nervous networking system or AI, using 10 different intersecting roads. We will improve the green traffic light. And allow more cars to easily flow through the intersections. Now days, with increasing many vehicles on restricted roads, the conventional traffic light creates prove startup-delay time and end-lag-time. The conventional traffic light loses the function of optimal cycle. And so, 30-45% of conventional traffic cycle is not matched to the present traffic cycle. In this paper proposes electro sensitive traffic light using fuzzy look up table method which will reduce the average vehicle waiting time and improve average vehicle speed. Computer simulation results prove that reducing the average vehicle waiting time which proposed considering passing vehicle length for optimal traffic cycle is better than fixed signal method which dosen't consider vehicle length.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.197-207
• /
• 2005

The purpose of this study was to investigate the body segment kinematics by lap time during men's 5,000m racing. The subjects in this study were 4 male athletics who take part in the competition. The two dimension motion analysis with DLT(direct linear transformation) method was executed using digital video cameras. The following conclusion was that : It was shown that top ranking in a competition is continuous race pattern and the last Lap time is the most fast. It was shown that top ranking in a competition is continuos the stride length and it was the largest in the last Lap time. It was shown that according to the passing Lap time trunk frontal angle was decreasing and shoulder angle was continuous.

• Communications for Statistical Applications and Methods
• /
• 제8권2호
• /
• pp.557-564
• /
• 2001

The objective of he study is to record the real conditions along with the soccer ball that is, each player's ball keeping time, the number football keeping, accuracy of passing to other player, direction, etc., on a real-time basis, measure them in numbers and get necessary analyzed output as much as one needs. The study consists of the following stages: (1) Record the data by drawing through Visual Interface on a real-time basis; (2) Graphic windows to display the recorded data item by item in graphic; (3) Form windows to display the individual or team scores anytime when needed; (4) Windows to display the analyzed data in visualized form. The effect of the study is threefold: (1) It inputs all the game-related data on a real-time basis, which was impossible before and shows analyzed contents during the game enabling each tea manager o use; (2) In cse of TV broadcasting or newspaper articles, it explains objectively the situations of he game to the TV viewers or readers; (3) After the game, it provides importance information on each team's playing ability and individual player's technical improvement through data analysis.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.631-641
• /
• 2020

In the present work, an approach for the multiple time probabilistic characterization of the response of linear structural systems subjected to random non-Gaussian processes is presented. Its fundamental property is working directly on the multiple time probability density functions of the actions and of the response. This avoids of passing through the evaluation of the response statistical moments at multiple time or correlations, reducing the computational effort in a consistent measure. This approach is the extension to the multiple time case of a previously published dynamic Probability Transformation Method (PTM) working on a single evolution of the response statistics. The application to some simple examples has revealed the efficiency of the method, both in terms of computational effort and in terms of accuracy.

• Smart Structures and Systems
• /
• 제9권3호
• /
• pp.287-301
• /
• 2012

It is well known that overloaded vehicles may cause severe damages to bridges, and how to estimate and evaluate the status of the overloaded vehicles passing through bridges become a challenging problem. Therefore, based on the monitored strain data from a structural health monitoring system (SHM) installed on a bridge, a method is recommended to identify and analyze the probability of overloaded vehicles. Overloaded vehicle loads can cause abnormity in the monitored strains, though the abnormal strains may be small in a concrete continuous rigid frame bridge. Firstly, the abnormal strains are identified from the abundant strains in time sequence by taking the advantage of wavelet transform in abnormal signal identification; secondly, the abnormal strains induced by heavy vehicles are picked up by the comparison between the identified abnormal strains and the strain threshold gotten by finite element analysis of the normal heavy vehicle; finally, according to the determined abnormal strains induced by overloaded vehicles, the statistics of the overloaded vehicles passing through the bridge are summarized and the whole probability of the overloaded vehicles is analyzed. The research shows the feasibility of using the monitored strains from a long-term SHM to identify the information of overloaded vehicles passing through a bridge, which can help the traffic department to master the heavy truck information and do the damage analysis of bridges further.

• 대한한방내과학회지
• /
• 제18권1호
• /
• pp.255-269
• /
• 1997

This study has been carried out to investigate the cause, pathological mechanism and treatment of CVA in Youmunsachin(儒門事親), written by Changjongjung(張從政) The results were follows : 1. The cause of CVA in Youmunsachin(儒門事親) was quotated from the theory of Naekyung(內經), Guel-eum-pung-mok(厥陰風木) and exogenous wind evil(外感風邪) on weakness of human body. 2. The pathological mechenism of CVA was that flows of Ki(氣) were obstructive, or executive heart(心) suppress lung(肺) and weakened lung(金) did not control liver(肝), executive liver brought to Gan-pung-nae-dong(肝風內動), and he thought that onset of CVA was frequent in 3nd, 4th, 9th. 10th, 12th lunar month. 3. In treatment of CVA, Han-to-ha-bub(汗吐不法, sweating vomiting passing stool method to remove evil) was used. His treatment was divided into ten sweating vomiting passing stool method by medication for internal use, one vomiting method by medication for external use and one sweating method by using acupuncture. 4. In treatment of CVA, when emergency time, vomiting and passing stool method were used, and then, method of Yangheulgeopung(養血祛風), Chungeulgeodam(淸熱去痰), Pyorissanghae(表裏雙解), Whalheultonglak(活血通絡) was used. 5. In the form of prescription, he used the form of Hwan, San(丸, 散), and he used toxic agent frequently.

• 한국대기환경학회지
• /
• 제27권6호
• /
• pp.663-671
• /
• 2011

Although a scooter is a convenient transportation means for a short distance traveling with a light package in the congested urban center, it might be one of the significant sources of air pollutants to which many people can easily be exposed during its passing-by. In this paper, we measured concentrations of gases and particles emitted from a scooter at roadside with no other traffic. To understand the characteristics of scooter emissions with respect to driving speed (idling, 30 km/h) at the roadside, total particle number concentration, particle size distribution, average surface area of particles deposited in the alveolar region, and concentrations of black carbon, CO, and $NO_x$ were measured. The concentrations of the particle number, surface area of deposited particles, CO, and $NO_x$ were highly fluctuated in the scooter's idling condition. The trends of particle number concentration, CO, and $NO_x$ generation were similar to one another. When the scooter started to move, all of $NO_x$, CO and particle number concentrations increased and after it passed by at the speed of 30 km/h, the concentration peaks of the particles and gases appeared at the same time. Unimodal size distribution with ~70 and ~93 nm mode diameters was observed for the idling and cruising condition, respectively. From this work, we found that emission from a passing vehicle could be characterized using a roadside monitoring technique.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.73-78
• /
• 2003

In this research, we implement Realtime Air Diffusion Prediction System which is a parallel Fortran model running on distributed-memory parallel computers. The system is designed for air diffusion simulations with four-dimensional data assimilation. For regional air quality forecasting a series of dynamic downscaling technique is adopted using the NCAR/Penn. State MM5 model which is an atmospheric model. The realtime initial data have been provided daily from the KMA (Korean Meteorological Administration) global spectral model output. It takes huge resources of computation to get 24 hour air quality forecast with this four step dynamic downscaling (27km, 9km, 3km, and lkm). Parallel implementation of the realtime system is imperative to achieve increased throughput since the realtime system have to be performed which correct timing behavior and the sequential code requires a large amount of CPU time for typical simulations. The parallel system uses MPI (Message Passing Interface), a standard library to support high-level routines for message passing. We validate the parallel model by comparing it with the sequential model. For realtime running, we implement a cluster computer which is a distributed-memory parallel computer that links high-performance PCs with high-speed interconnection networks. We use 32 2-CPU nodes and a Myrinet network for the cluster. Since cluster computers more cost effective than conventional distributed parallel computers, we can build a dedicated realtime computer. The system also includes web based Gill (Graphic User Interface) for convenient system management and performance monitoring so that end-users can restart the system easily when the system faults. Performance of the parallel model is analyzed by comparing its execution time with the sequential model, and by calculating communication overhead and load imbalance, which are common problems in parallel processing. Performance analysis is carried out on our cluster which has 32 2-CPU nodes.

• 한국IT서비스학회지
• /
• 제11권4호
• /
• pp.1-23
• /
• 2012

The growing interest in smartphones has increased the number of studies conducted on technology acceptance and user satisfaction. It is now over two years since the launching of smartphones, but there are not many researches on the usage behavior of today's smartphone users. Smart devices have evolved from smartphone to smart pad and smart TV, but there are still not many studies on variables such as knowledge about the parent product and the ability to use it. With this, I decided to study how the motivation and the ability of using smartphones affected the smartphone user's intention to use smartpads. This study presents the usage behavior of smartphone users and proves that the ability to use a parent product (smartphone) affects the user's intention to use an extension product (smartpad). The research results showed that the smartphone usage ability affected both variety of use and rate of use. The convenience and passing time factors affected variety of use; and the social interaction, entertainment and passing time factors affected rate of use. As for the intention to use smartpads, the smartphone usage ability and variety of use positively affected the smartphone user's intention to use smartpads. This study showed that the more the user used a smartphone to pass time and for convenience, the more effectively the user could use various functions. It proves that the variety of use of smartphone is highly related to the acceptance of smartpads. This study also proves that usage ability is an important factor in using innovative products, such as smart devices.

• 한국건축시공학회지
• /
• 제18권2호
• /
• pp.141-149
• /
• 2018

본 연구는 자기충전 콘크리트의 생산 및 시공 시 굳지 않은 상태의 안정성을 향상시킬 목적으로 유공 유리분말(GB)를 혼입한 자기충전 콘크리트에 대하여 충전성, 통과성, 재료분리 저항성 및 레올로지 특성을 평가하였다. 실험결과, GB 혼입량에 따른 충전성은 GB의 볼베어링 효과로 인해 GB $2.0kg/m^3$까지 $T_{50}$ 도달시간이 Plain에 비하여 단축되어 충전성이 개선되는 것으로 나타났다. 단, GB $4.0kg/m^3$에서는 오히려 약간 증가되었다. 통과성의 경우에는 Plain 1등급, GB $0.5{\sim}2.0kg/m^3$ 0등급, GB $4.0kg/m^3$ 1등급으로 GB 혼입량 $2.0kg/m^3$까지 '보이는 차단 없음'으로 통과성이 개선되었다. J-ring에 의한 통과성 Block step($P_J$) 값도 GB $1.0kg/m^3$에서 가장 우수한 통과성을 나타내었다. GB 혼입에 따른 재료분리 저항성은 동적 재료분리 저항성은 Plain 보다 GB을 사용하게 되면 그 혼입량에 상관없이 동적 재료분리 저항성이 증가하였다. 정적 재료분리 저항성은 GB $1.0kg/m^3$에서 재료분리도 2.5%를 나타내어 Plain(12.5%) 대비 크게 개선되었다. GB 혼입에 따른 레올로지 특성은 GB 혼입량 증가에 따른 소성 점도는 큰 차이가 발생하지 않았으나 항복응력은 $1.0kg/m^3$까지 낮아졌다. 이상을 종합하면, GB를 $1.0kg/m^3$ 사용하게 되면 자기충전 콘크리트의 충전성, 통과성, 항복응력 개선에 효과적인 것으로 나타났다. 또한 재료분리 저항성을 증가시켜 자기충전 콘크리트의 안정성에 도움이 될 것으로 판단된다.