• International Journal of Naval Architecture and Ocean Engineering
• /
• v.1 no.1
• /
• pp.50-56
• /
• 2009

The hydrodynamic effect of appendages for high-speed passenger vessels, such as Ro-Pax, Ro-Ro and cruiser vessels, is very severe and, therefore, it is essential to carry out the design of appendages for high-speed passenger vessels from the preliminary design stage to the final detail design stage through a full survey of the reference vessels together with sufficient technical investigation. Otherwise, many problems would be caused by mismatches between the appendages and the hull form. This paper investigates the design characteristics of some appendages, such as the side thruster, the shaft-strut, and the stern wedge, based on the design experience accumulated at Samsung, on CFD, and on model test results for high-speed passenger vessels. Further to this investigation, some practical and valuable design guidelines for such appendages are suggested.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.3 s.70
• /
• pp.77-81
• /
• 2006

In this study, design parameters of ice-transiting vessels in the world, currently in service or under construction, were collected and a database of principal particulars for each ship was established. To understand the recent design trend, ice-transiting vessels were categorized into four groups, i.e., conventional icebreakers, icebreaking tug/supply/research vessels, ice-strengthened passenger/car ferry and ice-strengthened cargo vessels. Changes in principal particulars for each group were reviewed and summarized. It was found that the most significant change in the design of ice-transiting vessels was the increment of large size commercial cargo vessels. It is believed that the recent hike of oil prices and booming of Russian economy has resulted in the need for year-round operation with bigger ships in the Baltic Sea and in the Sea of Okhotsk and also along the Northern Sea Route in Russian Arctic Sea.

• Journal of Fisheries and Marine Sciences Education
• /
• v.7 no.2
• /
• pp.173-181
• /
• 1995

In this paper, marine casualties occurred in Korean coastal and near-coastal seas, from 1989 to 1993, were analysed. The main results obtained were as follows : 1. According to the numerical component ratio of marine casualties, fishing vessels account for higher portion than other vessels and passenger vessels lower portion. On the other hand, in view of the occurring ratio of that, fishing vessels account for very low rate of accidents and passenger vessels very high rate. 2. Most of marine casualties resulted from the human factors such as careless operation and insufficient engine maintenance, etc. Collision accidents took a majority of all marine accidents in all of vessels, but engine trouble accounted for main cause of accidents in fishing vessels. 3. In view of the results on classifying marine casualties into time zone, great number of accidents took place in dawn, but that of fishing vessels in forenoon. 4. According to the view of the occurring ratio of the injury, the rate was 0.33% in total vessels and 0.18% in fishing vessels. 5. In view of the marine casualties by age and shipboard career, crews with 10~20 years shipboard career raised more marine accidents than others.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.135-140
• /
• 2001

In the last years there have been some severe accidents with passenger vessels. So, International Maritime Organization(IMO) has recognized that computer stimulation of the evacuation may be required for passenger vessels. Human elements is a key issues of escape analysis on shipboard. There are technical requirements to simulate of escape analysis for human elements. Technical requirements include model of ship structure, evacuation algorithm, human behaviour analysis and influence of ship listing/motion. This paper provides the key issues and technologies of simulation for human escape on shipboard.

• Journal of Navigation and Port Research
• /
• v.36 no.9
• /
• pp.763-767
• /
• 2012

The ratio of the mobility handicapped person is about 25.8% of the total population in Korea(MCT, 2006). In order to prepare for the enforcement of the "Transportation Services Improvement Act for the Mobility Handicapped People"(MCT, 2006), various equipments and installations should be developed to ensure appropriate safety level for the mobility handicapped persons in maritime transportation. While approximately 10 million people are using domestic passenger vessels annually, preferences for maritime transport is very low, especially for the mobility handicapped. This study reviewed a current status of the mobility handicapped person in domestic passenger ship and analysed the improvement plan for them. To investigate the current status of domestic passenger vessel usage by the mobility handicapped, to analysis the requirements for amenities necessary for the mobility handicapped and select the ones to be developed based on the investigated results and to do feasibility study of barrier-free ship.

• Korean Institute of Interior Design Journal
• /
• no.23
• /
• pp.9-16
• /
• 2000

year in Europe and Asia. Therefore the introduction of new ships continues at a great rate. There is a definite trend toward either large ships or smaller, more luxurious vessels in cruise industry. The day to design and build the large cruise vessel is coming to Korean shipyards, sooner or later. The most important thing to design large cruise vessel is to have a correct comprehension about the feature of cruise vessel, especially of the passenger accommodation area in cruise vessel. This paper is on the spatial features of the passenger accommodation area in cruise vessel. General arrangement drawings, deck plans and technical data of the newest large cruise ships are analysed to understand the spatial features and induce the direction of space planning of passenger accommodation area for the large cruise ship of tomorrow.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.2
• /
• pp.45-55
• /
• 1999

The majority of fishing vessels(under 20 tonnages) in Korea have a high casualty accident of the flood and capsizing occurred by lack of stability. Actually, it is so difficult to make out the data of inclining and stability tests of small fishing vessels after building, because most of them were built on experiences of manufacturer. According to above reasons, the aim of this study is an attempt to propose a stability criteria of small fishing vessels as follows: Firstly, it is examined that the stability is driven from a transverse metacenter height of actual ships, which is able to obtain a basic drawing and stability data. Secondly, it is examined the heeling at high-speed turning, and the period of rolling according to B/D(breadth/depth). Finally, it is suggested the stability criteria by using a dynamic state which is applied in passenger boat and fishing vessels over 24 meters.

• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.88-97
• /
• 2020

In the past 20 years, passenger and cargo transportation performance at the international passenger ports in Korea have increased by 8.6% on the compound annual growth rate, respectively. The Korean government had expected to continue expanding the market of car ferries and the government included plans for the development of additional routes and lanes with neighboring countries such as China, J apan, and Russia as a part of the Plan of the Korean Ministry of Oceans and Fisheries in 2019. However, compared to the development of routes, the management and operation of passenger terminals are inefficient. The purpose of this paper was to introduce the overall improvement of the passenger terminal operating system that reflects the recent changes in the supply and demand of international passenger vessels and the needs of the government and private sector passengers. To this end, a basic survey was conducted on the status of operations and facilities at the Busan International P assenger Terminal and a questionnaire survey was administered on the subject of use. The results of the survey were analyzed using the IPA model. As a result of the analysis, three items in the operation sector, three items in the facility sector, and four items in the system sector of the Busan International Passenger Terminal were identified as in need of improvement. Based on the results, the need for investment to improve the international passenger terminal operating system is suggested.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.767-774
• /
• 2017

Maritime traffic safety audits (MTSA) were enacted in order to ensure marine traffic safety throughout changes or the construction of water facilities, port facilities, etc. After the introduction of MTSA, the scope of subject vessels was restricted to an LOA of more than 100 m or a maximum speed of more than 60 knots as of 2014. In this study, the scope of subject vessels was re-examined in comparison with specific marine traffic safety areas and tanker prohibited areas identified in the maritime safety act. Furthermore, the state of subject vessels and exception cases for MTSA were also analyzed. As a result of these analyses, MTSA were deemed necessary for dangerous goods carriers of more than 1,000 G/T in specific marine traffic safety areas and dangerous goods carriers of more than 794 G/T in tanker prohibited areas. Finally, the necessity of further review was suggested given the present scope of subject vessels.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.114-119
• /
• 2004

For passenger vessels, twin shaft types in propulsion system is generally adopted to provide a high-speed performance in low draught due to restricted operating condition in harbors or water channels. Struts of twin open shaft type support the shafts, bearings, and propellers. Therefore, strut design is needed to consider not only hydrodynamic performance but also structural and noise/vibration performance, In this paper, considerations in strut design at the initial design stage have been discussed based on existing references, numerical calculations, and their comparisons. Also, the strut design of a RoPax ferry has been carried out at the initial design stage, for an example.