• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.1-7
• /
• 2003

Large Passenger Ferry has been delivered with a tendency of high speed since 1990´s. More than 50 ferries that exceed 25 knots in service speed are operating or under construction these days. Therefore, the hull form development for the large size ferry should be carefully carried out with some design points such as high service speed, severe criteria for stability, and complex design of appendages. This paper reviewed principal particulars and hull form characteristics of a high-speed large passenger ferry. It is also suggested the optimization method of hull form and appendages in point of resistance & propulsion performance. Finally, it is also introduced a high-speed large passenger ferry developed by Samsung Heavy Industries Co., Ltd., the key design points in hull form development.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.14-21
• /
• 2007

A passenger ship is consist of five(5) constituents; passenger, sea, crew, port and ship itself and the rule & regulation which is applicable to passenger ship are differently required as their objects of constituents. the basic concept of rule & regulation can be defined all activities to keep safety of ship and her constituents. Especially, the rule & regulation for passenger ship design and construction shall be considered not only safety of ship itself but also safety of lives, so its are required more severe than commercial vessel. Recently, the IMO have finished the rule making work on the 'passenger ship safety' since it has been discussed last 2000 and next MSC meeting will be adopted the results. In this paper, the application method of rule & regulation are treated and the new rule which were made by IMO are introduced. The rule & regulation for passenger ship is one of the most important things. therefore, it is required to careful consideration to apply on the rule application.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 공동학술대회
• /
• pp.161-162
• /
• 2009

In Korea there are Passenger ships on 106 routes running out of 10 port cities. These cities, such as Mokpo, Masan, Incheon, are the main transportation hubs the island residents today. But most passenger ship companies in Korea are limited in income and mostly small in size. These small companies have many challenges to overcome and are slow to improve services. Frequent service cancellations, aging sailors and a decline in service are contributing factors.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.57-64
• /
• 2021

Maneuvering motions of a ship in calm water are studied through the concept of MMG model. Governing forces are defined by the use of available empirical formulae that require only main ship particulars as input variables. In order to validate the calculation tool, a full-scale sea experiment was carried out in Osaka Bay using a 17-m twin-screw passenger ferry. Test execution and data measurement were performed through the utilization of an autopilot control unit and satellite compass. The result of a straight running test confirms the acceptable accuracy in addressing the surge motion problem. Reasonable agreement between simulation and experiment is also confirmed for 5°/5° and 10°/10° zig-zag tests despite the strong environmental disturbance. The current model can generally represent the subject ship maneuvering motions and is promising for the application to other ship hulls.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.73-76
• /
• 2006

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.577-587
• /
• 2017

The recent IMO MEPC regulation on EEDI, EEOI and increased fuel cost has worsened the financial condition of the small and medium sized passenger ferry companies, and it is situated to acquire the economic ships with a pretty high resistance performance. The purpose of this research is to develop a design method on the efficient gooseneck bulb for the middle-sized passenger ferry operated in the Far East Asian seas. The hull forms are designed by varying the gooseneck bulb parameters to find the changes on the resistance performance according to the shape of bulb. The numerical series tests are made to derive the regression equation for estimating the resistance through analyzing the data statistically. This equation is set as an objective function, and then using the optimization algorithm searches for the optimal combination of the design variables. After a hull form is designed corresponding to optimized parameters.

• 공기청정기술
• /
• 제13권3호통권50호
• /
• pp.29-39
• /
• 2000

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.114-119
• /
• 2004

For passenger vessels, twin shaft types in propulsion system is generally adopted to provide a high-speed performance in low draught due to restricted operating condition in harbors or water channels. Struts of twin open shaft type support the shafts, bearings, and propellers. Therefore, strut design is needed to consider not only hydrodynamic performance but also structural and noise/vibration performance, In this paper, considerations in strut design at the initial design stage have been discussed based on existing references, numerical calculations, and their comparisons. Also, the strut design of a RoPax ferry has been carried out at the initial design stage, for an example.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.63-66
• /
• 2017

All passenger ships aboard more than 36 passengers are to be able to easily find escape routes when the escape way by fire with flame spread were onboard vessel (incl. Ferry, Passenger, Ro-pax, Inland Ferry) It should be impossible by ordinary emergency lights. The international Maritime Organization (IMO) gives special requirement for luminescent evaluation onboard test procedure and applicable location of low location lighting. In order to maintain the residual light source for a certain time in the low location lighting with a strip-shaped light source, the light source material must be sufficiently exposed to the light due to the proper placement of the escape route. The lighting arrangement influence how maintain low location lighting strip luminescent which measured onboard in connection with what elements are mainly sustain luminescent.

• 한국항해항만학회지
• /
• 제44권2호
• /
• pp.88-97
• /
• 2020

In the past 20 years, passenger and cargo transportation performance at the international passenger ports in Korea have increased by 8.6% on the compound annual growth rate, respectively. The Korean government had expected to continue expanding the market of car ferries and the government included plans for the development of additional routes and lanes with neighboring countries such as China, J apan, and Russia as a part of the Plan of the Korean Ministry of Oceans and Fisheries in 2019. However, compared to the development of routes, the management and operation of passenger terminals are inefficient. The purpose of this paper was to introduce the overall improvement of the passenger terminal operating system that reflects the recent changes in the supply and demand of international passenger vessels and the needs of the government and private sector passengers. To this end, a basic survey was conducted on the status of operations and facilities at the Busan International P assenger Terminal and a questionnaire survey was administered on the subject of use. The results of the survey were analyzed using the IPA model. As a result of the analysis, three items in the operation sector, three items in the facility sector, and four items in the system sector of the Busan International Passenger Terminal were identified as in need of improvement. Based on the results, the need for investment to improve the international passenger terminal operating system is suggested.