• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.3
• /
• pp.279-287
• /
• 1996

Pressure drop and fractional collection efficiency of automotive cabin air filters were examined to obtain the basic data for the development of high performance domestic cabin air filters. Pressure drop of MA-V100 was higher than that of VF-V100, and it increased with the air flow rate. VF-V100 had longer time to rise the critical pressure drop than that MA-V100 had. Total collection efficiency of MA-V100 for initial and dust loaded conditions was higher than that of VF-V100. Also, fractional collection efficiency of MA-V100 for the fine particles was higher than that of VF-V100. Particla size distribution for the minimum collection efficiency ranged from 0.02 $\mu$m to 0.04 $\mu$m for MA-V100 and it ranged from 0.02 $\mu$m to 0.15 $\mu$m for VF-V100.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.288-294
• /
• 2003

Increasing the volume of traffic on the roads causes social and economical problems such as increasing air-pollution and distribution cost. Prefabricated light weight bridge becomes a possible solution for these problems in the urban area where it is difficult to construct new one or expend the existing road. There are some merits in this kind of bridge. First, the design live and dead loads are minimized by allowing only passenger cars. Second employing prefabrication construction scheme reduces the construction time. Third, there is no need to buy land if the elevation road is placed on the top of existing one. In seismic design of bridges, base isolation has been an effective solution when the bridge has stiff piers and a heavy superstructure. The prefabricated light weight bridge has different dynamic characteristics from the ordinary bridges. In this paper, the applicability of base isolators such as lead rubber bearing and elastomeric bearing, to prefabricated light weight bridge is examined.

• Journal of ILASS-Korea
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2019

This study was carried out to analyze the spray characteristics as a function of the operating parameters of urea injector used in Urea-SCR system of passenger diesel vehicle. Spray visualization and PDPA experiment were performed to analyze the macroscopic spray development and atomization performance of urea-water-solution. For the urea injector, the deformation of the spray head does not appear to be significant because it operates at a low pressure conditions, and the liquid core and primary droplet are observed throughout the operating conditions. No increase in atomization is seen when the operating pressure is increased, and the spray develops linearly due to poor atomization characteristics. The macroscopic spray behavior of the low-pressure urea injector is predictable through the modification of the Hiroyasu equation.

• International journal of advanced smart convergence
• /
• v.11 no.4
• /
• pp.266-272
• /
• 2022

Structural stress analysis is performed to confirm the safety of the structures before the construction, and stress analysis is performed to evaluate the safety of various components before the ship or vehicle corresponding to the moving structure is manufactured. In this case, the stress analysis work is performed using the stress analysis software of each company. The results of the stress analysis based on the boundary conditions of the applied loads are analyzed to evaluate the safety of the structure, but the results are difficult to verify because most of the stress analysis software possessed by each company is one. In this paper, we were performed the stress analysis of the bracket applied to the bare chassis of the 30-passenger bus under development is performed by HYPERMESH. In order to verify this, the stress analysis is performed using ANSA/META under the same boundary condition. The stress analysis results of ANSA/META and HYPERMESH showed that they had the same stress distribution and the maximum stress occurred at the same location. Taken together, the results of stress analysis using HYPERMESH were reliable.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.1
• /
• pp.59-77
• /
• 2008

The purpose of this study is to investigate the impact of traffic-related air pollution on the urban population in the Metropolitan Seoul area. In particular, this study analyzes urban population exposure to traffic-related particulate materials(PM). For the purpose, this study examines the relationships between traffic flows and PM concentration levels during the last fifteen years. Traffic volumes have been decreased significantly in recent year in Seoul, however, PM levels have been declined less compare to traffic volumes. It may be related with the rapid growth in the population and vehicle numbers in Gyenggi, the outskirt of Seoul, where several New Towns have been developed in the middle of 1990's. The spatial pattern of commuting has changed, and thus and travel distances and traffic volumes have increased along the main roads connecting CBDs in Seoul and New Towns consisting of large residential apartment complexes. These changes in traffic flows and travel behaviors cause increasing exposure to traffic-related air pollution for urban population over the Metropolitan Seoul area. GIS techniques are applied to analyze the spatial patterns of traffic flows, population distributions, PM distributions, and passenger flows comprehensively. This study also analyzes real time base traffic flow data and passenger flow data obtained from T-card transaction database applying data mining techniques. This study also attempts to develop a space-time model for assessing journey-time exposure to traffic related air pollutants based on travel passenger frequency distribution function. The results of this study can be used for the implications for sustainable transport systems, public health and transportation policy by reducing urban air pollution and road traffics in the Metropolitan Seoul area.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.65-75
• /
• 2014

Bus headway plays an important role not only in determining the passenger waiting time and bus service quality, but also in influencing the bus operation cost and passenger demand. Previous research on headway control has considered only an hourly difference in the distribution of ridership between peak and non-peak hours. However, this approach is too simple to help manage ridership demand fluctuations in a short time scale; thus passengers' waiting cost will be generated when ridership demand exceeds the supply of bus services. Moreover, bus ridership demand varies by station location and traffic situation. To address this concern, we propose a headway control algorithm for minimizing the waiting time cost by using Smart Card data. We also provide proof of the convergence of the algorithm to the desired headway allocation using a set of preconditions of political waiting time guarantees and available fleet constraints. For model verification, the data from the No. 143 bus line in Seoul were used. The results show that the total savings in cost totaled approximately 600,000 won per day when we apply the time-value cost of waiting time. Thus, we can expect that cost savings will be more pronounced when the algorithm is applied to larger systems.

• Journal of the Economic Geographical Society of Korea
• /
• v.24 no.2
• /
• pp.127-142
• /
• 2021

This study identifies the characteristics of changes in the subway passengers and the number of COVID-19 confirmed cases in Seoul. We classify subway stations by applying the principal components extracted based on the correlation between them, and analyzed the passenger traffics and geographical characteristics of each cluster. We extract the "top decile" and "lowest decile" stations among the subway stations that the number of subway passengers have decreased in 2020 compared to 2019, and then examine the population and land use characteristics of station areas both station groups. As the result of cluster analysis according to principal component scores, we obtain 6 cluster types. Subway stations belong to the top deciles which have shown the larger decrease in the passenger traffics tend to more sensitive to COVID-19 shocks. Stations belonging to the top tenth percentile of reduced traffic have a high distribution of daytime traffic, and the hinterland of the station has relatively high land use related to commercial and cultural, religious, and social activities. Therefore, it is expected that the regional resilience around subway stations will also show differences in degree by type.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.221-231
• /
• 2024

The aim of this study was to enhance the safety and care of mental health for seafarer working in passenger ship workspaces. Brightness, color values, and color distribution were investigated with issues and improvement ways identified through seafarers' interviews. Firstly, previous studies, references, current policy, regulations, and accident case studies were reviewed. Color compositions of wheelhouse and engine room of M Ship were then surveyed in the field. Color values of each space were analyzed using a colorimeter. Colormeter analysis of brightness and color measurements in the wheelhouse and engine areas indicated that ceilings, walls, and floors were generally dark, with the engine area being very dark. Regarding color, green and blue were distributed in the ceiling of the wheelhouse and engine area, while red and blue were in the walls and floors of the wheelhouse and engine area. According to interviews with seafarers currently working at engine rooms, they responded about their experience of near miss incidents due to a decrepit indoor environment, a dark working environment, slippery and bright flooring, and stairs that were not suitable for domestic users. Thus, when installing lighting in the future, the brightness of the space should be improved by distinguishing between night and day. A lighting plan considering the location of lighting, level of shadow formation and contrast, reflectance of the facility, glare, color of light, floor color plan, and material selection is needed. A facility design suitable for domestic users is also needed.

• Analytical Science and Technology
• /
• v.29 no.3
• /
• pp.136-141
• /
• 2016

In the present study, the distribution of glass particles inside 10 patrol cars of Chungnam Province has been studied. The target seats were front seats (driver’s seat, passenger’s seat) and the back seat. The target areas were the bottom of the seat (seat contacting buttocks, back of the seat, and the corner of the seat (the bottom and back attached part)). The target areas were tape lifted with an adhesive tape. The glass particles adhering to the adhesive tape were examined and counted under a stereomicroscope. The total number of glass particles found was 679. Among them, 471 (driver’s seat 293, passenger seat 178) were collected from front seats, which are usually occupied by police officers. The majority of glass particles were under 0.49 mm size. The results show that the majority of glass particles can be found on the front seats, rather than on the back seat. There is a high probability that glass particles found on the front seat adhere to police officers, so that to get further transferred to the convict upon physical contact (secondary transfer). Thus, there is a risk of misinterpretation of the value of glass evidence in the course of forensic examinations. Hence, a separate method to prevent cross contamination has to be prepared by police authorities as soon as possible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4751-4755
• /
• 2011

This study investigates the plastic suspension assembly which is installed on inside of vehicle seat and support passenger's back to supply the comfortable ride performance. It aims to develop the structural design in order to support driver's back uniformly and assemble seat back frame with plastic suspension effectively. The part of suspension is designed by considering the body pressure distribution of driver and it has the same size as the practical model on simulation analysis. It is confirmed that the analysis result of plastic suspension approaches the practical measured values and the better body pressure distribution can be obtained as compared with the existing wire type.