• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1996년도 추계학술대회 학술발표 논문집
• /
• pp.198-207
• /
• 1996

Electro sensitive traffic system can't consider passenger car unit, so, it causes start up delay time and passenger waiting time. In this paper, it antecedently creates optimal traffic cycle of passenger car unit at the bottom traffic intersection. But, sometimes it can make mistakes due to changes in car weight, car speed, and control of feed-back data. Moreover, to prevent spillback, it can adapt control even though upper traffic intersection has a different saturation rate, road length, road slope and road width.

• 소음진동
• /
• 제6권2호
• /
• pp.205-214
• /
• 1996

Active noise control(ANC) requires the full capability of a modern digital signal processing module. This paper describes the digital signal processing unit which is designed for ANC of noise fields in passenger car. System hardware is designed to allow software controlled versatility as well as fully qutomatic operation. The developed system is provided with the ability to be self-operated except the case of upload/download of data and program between the personal computer and the system memory. Experimental results are presented to demonstrate ANC performance of noise fields in lightly damped enclosure and passenger car.

• 한국지능시스템학회논문지
• /
• 제6권3호
• /
• pp.51-62
• /
• 1996

전자감응식 교통신호시스템은 승용차환산계수를 고려하지 않음으로서 과포화상태에서 출발지연시간 및 승용차 대기시간을 유발하고 있다. 본 논문에서는 전처리로,우선 신경망을 이용하여, 하위 교차로의 승용차환산계수를 생성한다. 그러나, 간혹 차량의 무게, 속도가 틀리기때문에 최적주기신호를 부정확하게 산출할 수 있다. 그러므로 후처리로 상위교차로의 포화상태비율에 의한 Feed-Back된 데이터를 이용한 퍼지제어를 함으로서, 과포화시에 승용차대기 시간 및 출발지연시간을 감소기키는 연구이다. 뿐만아니라, 과포화상태에서 앞막힘현상을 예방제어하기 위해서 포화상태비율, 도로길이, 도로경사도, 도로폭등이 같지 않은 상위교차로에서도 앞막힘현상을 예방제어 할 수 있도록 하였다.

• International Journal of Reliability and Applications
• /
• 제11권1호
• /
• pp.55-67
• /
• 2010

There has been a recent upsurge in demand for the improvement of car reliability in the Northern American which is the primary market of South Korea automobile industry. It has been required that the warranty for transmission control unit for passenger cars directly related to passenger safety or security should be extended for 10 years and 160,000 km. In this paper, the test method for reliability and evaluation criteria is presented to evaluate the reliability on the automatic transmission controller. Reliability certification test can be roughly divided into two types: a quality test and life assessment test and a quality test can be subdivided into a basic performance test and environmental resistance test. There are 3 types of tests on the performance test for automatic transmission controller and environmental resistance test is composed of 14 items. Life test is performed with only the product passed this quality test. In this study, operation limit test at the high-temperatures, accelerated life test under specific temperature and accelerated life test for 2 or 3 stress levels are shown as a way for life test.

• 한국항만경제학회지
• /
• 제27권2호
• /
• pp.27-38
• /
• 2011

본고는 우리나라 항만별 승용차 수출행태의 차이를 밝히는데 목적을 둔다. 수출은 미국의 경기와 미국 달러의 일본 엔화표시 환율의 함수로 한다. 경제이론에 의하면 미국 경기의 상승은 우리나라 항만의 승용차 수출의 증가로 나타나며, 엔화 환율의 상승은 엔화 가치하락에 따른 일본 승용차의 가격경쟁력 상승으로 우리의 승용차 수출이 감소한다. 먼저 항만별 수출모형의 안정성을 GPH 기법을 이용하여 모형의 안정성을 확보한 후 오차수정계수를 도출하여 항만간 계수의 차이가 크며, 군산항에서 가장 작고 울산항에서 가장 크다는 것을 밝힌다. OLS를 이용한 모형의 추정을 통해 3개 항만의 수출행태가 경제이론과 일치한다는 것을 보인다. 그리고 예측오차의 분산분해를 통해 항구별 승용차 수출이 경기와 환율에 대해 내생변수라는 것과 역사적 분해를 통해 경기쇼크가 3개 항만 수출변동의 주요 변수라는 것을 밝힌다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.123-128
• /
• 2007

To predict the fire and smoke hazards of rail car with a evacuation model is essential for achieving life safety of all passengers in the event of fire. Currently, more than 30 different evacuation models are available and expected increasing demand in high population density areas as a metro train station. This paper includes brief history of evacuation models and review some key factors of design egress scenario, these are pre-movement time, egress route, location of fire, overturned carriage, and configuration of rail car. Applying the egress model for rail passenger car, users need to confirm the model's ability of physiological, psychological responses effecting to pre-movement time of individual or crowd unit, representation of complexity of carriage layout, and evaluation of effects of smoke.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.378-384
• /
• 2008

This Paper presents dynamic analysis of HVAC(Heating Ventilation & Air Condition) Heater Case which consists of heater and evaporator unit for passenger car. To analyze the dynamic characteristics of HVAC Heater Case. finite element model which consists of shell elements is constructed for modal analysis and experimental Modal analysis has been conducted. Finite element analysis results are compared with experimental results to evaluate of validity of finite element model After identifying node shape and natural frequency of HVAC Heater Case, local stiffness of HVAC Case is evaluated through point mobility using finite element analysis and experiment.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.101-108
• /
• 2009

This paper presents dynamic analysis of HVAC(heating ventilation & air conditioning) heater case which consists of heater and evaporator unit for passenger car. To analyze the dynamic characteristics of HVAC heater case, finite element model which consists of shell elements is constructed for modal analysis and experimental modal analysis has been conducted. Finite element analysis results are compared with experimental results to evaluate of validity of finite element model. After identifying mode shape and natural frequency of HVAC heater case, local stiffness of HVAC case is evaluated through point mobility using finite element analysis and experiment.

• Tribology and Lubricants
• /
• 제30권3호
• /
• pp.183-188
• /
• 2014

In this paper, we present our analysis of tribological failure examples for an anti-lock brake system(ABS) in a car. The study range of this paper is to improve the quality of ABS system by analyzing with sensor, computer, actuator and oil lines. In the first example, the brake leak from hydraulic supply line in a caliper on the rear left side of the ABS hydraulic modulator. This produces the sponge phenomenon, where the car does not brake even when the driver operates the brake pedal. The hydraulic unit operating ABS is actuator that play role regulating drive condition according with the oil pressure supplied with wheel of a car. In the second example, the service man does not completely tighten the fixed bolt after repairing the car. This causes the ABS warning lamp to light up as the ABS wheel speed sensor cannot detect whether the ABS has been activated. In the third example, the ABS electronic control unit is separated from the soldered part of the inner circuit board. Consequently, the ABS fails in control because the ABS motor pump receives no-signal for the hydraulic unit. The wheel speed sensor has to large durability because of giving signal of acting condition to computer by detected the acceleration and deceleration of wheel of a car. In the fourth example, the ABS warning lamp lights up of when cracks propagate in the circuit board soldering part. The circuit of this computer is very important part for input and output the operating signal of system. Such failures can aggravate the durability of the ABS. Thus, the ABS needs to be optimized to eliminate malfunction phenomenon.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1499-1504
• /
• 2007

Spot-welding is widely used to construct passenger car bodies in automotive industry. Occasionally severe spot-weld distortions in sub-assembly make further spot-weld difficult. In this paper, distortions for various spot-weld conditions are measured using coordinate measuring machine. Then, based on finite element solution for unit translation or unit rotation of nugget edge, equivalent loads for spot-weld distortions are determined. They can be used to predict the spot-weld distortion using finite element method.