• 한국항만경제학회지
• /
• 제32권4호
• /
• pp.183-192
• /
• 2016

항공 및 해상교통수단의 발전과 소득 및 여가시간의 증대로 해외로 출국하는 여행객의 수는 매년 증가하고 있는 실정이다. 하지만 충청남도는 한국에서 유일하게 공항이 없는 지역으로 충남도민들은 해외 여행 시 인천 등 타 지역을 통해 여행을 하여야 하는 불편함을 겪고 있다. 이에 본 연구는 충남도민들의 접근교통에 따른 운송수단 선택행동에 관하여 분석하였다. 이를 위하여 Stated-preference(SP) data를 활용하여 Multinominal Logit Model(MNL)을 이용하였다. 충남도민들이 해외여행 시 운송수단 선택의 경우 거주지에 따라 다른 특성을 보이는 것으로 분석되었다. 또한 거주지-공항/항만까지 접근성이 공항/항만-목적지까지 운송보다 교통수단 선택행동에 더 큰 영향을 미치는 것으로 분석됐다. 특히 접근소요시간 및 접근교통 운영 빈도요인이 가장 큰 영향을 미치고 있는 반면 운송시간이 상대적으로 적은 영향을 미치고 있는 것으로 분석되었다. 운송수단의 선택은 여객터미널 선정에도 영향을 미치는 것으로 여객터미널 운영사는 접근성을 중요하게 고려하여야 한다. 접근교통수단의 개선은 인천공항을 이용하여 중국으로 출국하는 이용객 중 일부 여객 수요가 전환될 수 있다는 결론이 도출되었다.

• 한국항공운항학회지
• /
• 제20권1호
• /
• pp.26-33
• /
• 2012

Competition between air transportation and railways has grown fiercer in major countries around the world with the rise of high-speed railways. In South Korea, air passenger travel has been rapidly decreasing since the initial launch of the Seoul-Pusan KTX line in 2004 and second opening that followed in 2010. Further expansion of the high-speed railway is expected. At present, research efforts to verify the validity of constructing an underwater express railway tunnel between Ho-nam and Jeju Island are taking place. Considering the possible high speed railway connection between Seoul and Jeju Island, this thesis has analyzed the choice behavior of existing passengers of the major and low-cost carriers. For this, Stated Preference (SP) research has been performed for three variables, including fare, travel time and the number of runs, to estimate the substitution rate of each of the three variables. Binomial Logit Model has been estimated with the obtained data. The estimation of the model has found that airline passengers of major and low-cost carriers are willing to pay approximately 7,200 KRW and 5,000 KRW, respectively, to reduce travel time by one hour. If the number of runs in one day increases, it has been estimated that the passengers are willing to pay additional fares of about 390 KRW and 30 KRW, respectively. On the other hand, the substitution rate between the number of runs and the travel time was found to be somewhat insignificant. If the construction of the Seoul-Jeju line progresses in the future, this study could be used as preliminary data for determining fares, travel time and the number of runs.

• Elastomers and Composites
• /
• 제33권3호
• /
• pp.168-176
• /
• 1998

자동차의 고무부품 중의 하나인 스트라트방진고무의 특성 평가를 위하여 유한요소해석과 피로 수명시험을 실시하였다. 유한요소해석에 필요한 변형률에너지함수의 계수를 결정하기 위하여 인장, 압축 및 전단시험을 실시하였으며, 유한요소해석 결과로부터 변형 양성 및 취약 부위를 예측하였다. 부품의 피로수명시험 결과로부터 하중-수명 관계를 얻었으며, 피로파손 부위는 유한요소해석에서 예측된 취약 부위와 잘 일치하였다.

• 한국통신학회논문지
• /
• 제36권6B호
• /
• pp.697-709
• /
• 2011

차량과 같은 이동환경에서 무선 인터넷 서비스를 사용할 때, 불필요하게 발생하는 핸드오버는 서비스 품질 저하와 시그널링 오버헤드를 유발하여 실시간 멀티미디어 서비스 제공에 단점으로 작용한다. 본 논문에서는 Mobile Node (MN)가 일정한 이동패턴을 가지고 있을 때, Mobility behavior profile을 이용하여 생성한 DTMC을 이용하여 핸드오버의 발생 횟수를 감소시켜 무선 인터넷 서비스를 향상시킬 수 있는 핸드오버 방법을 제안한다. 기존 핸드오버 방법을 반복적으로 수행하며 Mobility behavior profile을 학습하고, Mobility behavior profile 에 충분한 양이 학습되면 Mobility behavior profile을 이용하여 DTMC의 1-step & 2-step transition probability matrix를 생성한다. 그 이후에는 DTMC의 1-step & 2-step transition probability matrix를 이용하여 핸드오버를 수행하며 Mobility behavior profile을 계속 업데이트한다. 4개의 Mobility model에서의 실험을 통하여 평균 핸드오버 횟수와 평균 RSSI값, 그에 따른 Throughput을 비교한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.607-612
• /
• 2004

Disc brake noise continues to be a major concern throughout the automotive industry despite efforts to reduce its occurrence. Eliminating vibrations during braking is an important task for both vehicle passenger comfort and reducing the overall environmental noise levels. There are several classes of disc brake noise, the major ones being squeal, judder, groan, and moan. In this study, analytical model for moan noise of rear disk brake is investigated. Modeling of the disc brake assembly to take account of the effect of different geometrical and contact parameters is studied through the use of multi-body model. The contact stiffness of the caliper and torque member plays an important role in controlling brake vibration. Therefore, a suitable material pair at the caliper/body contact has been made. An ADAMS model of a rear disc brake system was integrated with a flexible suspension trailng arm from MSC/NASTRAN. A fully non-linear dynamic simulatin of brake system behavior, containing rigid and flexible bodies, was performed for a Prescribed set of operating conditions. Simulation results were validated using data from vehicle experimental testing.

• 자동차안전학회지
• /
• 제11권4호
• /
• pp.57-62
• /
• 2019

The seat back frame of the vehicle is subjected to load on the passenger behavior. Because of steel material, it is necessary to optimize the frame considering lightweight and safety. In this paper, finite element analysis is used for the optimal design of the seat back frame. First, a lightweight material is applied to reduce the weight of the seat back frame. Secondly, the design position of the pipe part fastened in the seat back frame was selected by considering the strength against the load generated by the occupant. Third, the shape of the side frame was derived by performing the phase optimization analysis for the AFT load condition. And we have compared the initial model with the optimal model to verify the light weighting and safety. As a result, the optimal design model of the seat back frame satisfying the weight reduction and safety has been proposed.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.285-287
• /
• 2005

During fabrication of deck house block in passenger ships, the problem of unexpected large deformation and distortion frequently occurs. In this case, line and spot heating method were widely used to correct the distortion of thin plate structure. Spot heating was especially used for the case under 5mm thickness. Few papers are available on the working conditions of spot heating method but only little information on deformation control. In this study, evaluation was carried out on the temperature distribution of spot heating methods using FEA and practical experiments for various heating time. IIn FEA, heat input model was established using Tsuji's double Gaussian heat input mode (Tsuji, I., 1988). This model was verified by comparing with experimental data. Also radial shrinkage and angular distortion due to spot heating were determined and compared with experimental results. Thermo elasto-plastic analysis was performed using commercial FE code, MSC/MARC. Radial shrinkage and angular distortion were measured using 3D measuring apparatus. Based on these results, simplified analysis model for deformation by spot heating was established.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1993년도 추계학술대회논문집
• /
• pp.243-251
• /
• 1993

With the recent issuance of a dynamic side impact test regulation in the Federal Motor Vehicle Safety Standard in the United States of America, many aspects of occupant protection in side impact crashes have been under investigation. Many investigations of real world accidents, crash test results and simulation studies have established that in side impact crashes of passenger cars, thoracic and pelvic injuries of occupant are, large part, caused by occupants' impact against the interior side of the vehicle, primarily the door. This paper is concerned with the development of a lumped mass computer model, which simulates the interaction of a struck car door and an adjacent seated occupant in side impacr, based CTP code which has been successfully used in vehicle and occupant simulation. New model developments include elimination of influence of vehicle side structure stiffness in the occupant injury responses. The model was used to investigated the effect of various door padding characteristics on occupant responses to improve vehicle safety performance. The evaluation of different crush properties of door padding have also focused to understand of behavior of impacted occupant. Results from simulations, The effects of both material coefficients $C_{f}$ and p were illustrated in terms of occupant injury criteria TTI and pelvis.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.198-204
• /
• 2007

The modelling and design of the PCV(Pressure Control Valve) for passenger car CVT(Continuously Variable Transmission) are considered in this paper. For analysis and design, the simulation model of the PCV is derived by using commercial software, AMESim. For a good design of the PCV, the sensitivity analysis for design parameters is carried out and the static and dynamic characteristics of the developed PCV are experimented. The simulation and experimental results are presented to show the validity of the design process.

• KSTLE International Journal
• /
• 제7권2호
• /
• pp.56-60
• /
• 2006

By the increasing amount of vehicles, the increase of car accident served as a major momentum for remind the importance of braking system. The adequate design of a passenger car braking system, which is directly related to the safety of a car, is very important since the safety is an essential design parameter of a car to keep men and car from the damage. The thermal behaviors of the ventilated disk has been investigated based on the air cooling effects during repeat braking operations. In this study, the temperature and velocity fields of 3-D unsteady simulated model are obtained using a software package "FLUENT". The numerical results show that there exits a temperature nonuniformity between the disk faces contacting with pads.