• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.810-813
• /
• 2003

Application of inorganic silica-neodymia alloy films grown by sputtering technology to the dielectric layer of plasma display panel (PDP) is presented. The experimental results reveal that dielectric constant of the alloy films increases with neodymia concentration. Also, the alloy films act as band rejection color filter owing to sharp absorptions originating in the intratransition within the 4f shell of the $Nd^{3+}$ ion. In the optical band pass region, the transmittances of the alloy films show higher than those of commercial glass-like dielectrics. As a result, the luminance of PDP device with the alloy dielectric layer is higher than that of device with conventional dielectrics, indicating wider color gamut and higher color purity.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.202-207
• /
• 2002

The soundness of honeycomb core sandwich and laminate structure used for commercial aircrafts is generally evaluated with ultrasonic inspection because the inspection is most sensitive to planar surfaces which are perpendicular to sound propagation pass and reflects sound almost 100％ to equipment. And most defects inherent in composite material curing process has good reflective surfaces. With all this advantage, unexpected obstruction to product and additional cost could be occurred when inappropriate accept/reject criteria is given. In this study the importance of inspection criteria will be discussed to show how inappropriate criteria cause unexpected results leading to high production cost and how much time must be spent to correct those improper criteria with an actual case occurred in Aerospace Division, Korean Air.

• 센서학회지
• /
• 제26권6호
• /
• pp.386-390
• /
• 2017

A $5^{th}$-order low-pass filter (LPF) chip implemented in a six-layer low-temperature co-fired ceramic (LTCC) dielectric substrate has been presented. Lumped elements constituting the LPF are designed three-dimensionally in multilayers. In order to improve the parasitic and mutual coupling effects between them, the LPF is designed by sequentially integrating the three-dimensional (3D) lumped elements, by comparing it to the results of the schematic circuit and 3D electromagnetic (EM) analysis. The designed 3D LPF chip was fabricated in a six-layer LTCC substrate as small as $4.0{\times}3.22{\times}0.68mm^3$. The measured return and insertion losses are less than -11 dB and -0.61 dB, respectively, below 1.5 GHz.

• 한국결정성장학회지
• /
• 제12권3호
• /
• pp.161-164
• /
• 2002

Polycrystalline and epitaxial heterostructure films of $La_{0.5}Sr_{0.5}CoO_{3}/Pb(Nb_{0.04}Zr_{0.28}Ti_{0.68})O_{3}/La_{0.5}Sr_{0.5}CoO_{3}$ (LSCO/PNZT/LSCO) capacitors were evaluated in terms of low voltage and high speed operation in high density memory, using TiN/Pt conducting barrier combination. Structural studies for a high density ferroelectric memory process flow, which requires the integration of conducting barrier layers to connect the drain of the pass-gate transistor to the bottom electrode of the ferroelectric stack, indicate complete phase purity (i.e. fully perovskite) in both epitaxial and polycrystalline materials. The polycrystalline capacitors show lower remnant polarization and coercive voltages. However, the retention, and high-speed characteristics are similar, indicating minimal influence of crystalline quality on the ferroelectric properties.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.343-346
• /
• 2003

A new structure to design low pass filters (LPFs) is presented rho proposed structure has the etched shape of Quad-Spiral DGS(Defected Ground Structure) on microstrip transmission lines. By extracting the equivalent circuit elements of unit Quad-Spiral DGS, LPFs are designed easily. The equivalent circuit of Quad-Spiral DGS consists of a step impedance resonator and lumped elements. The proposed LPF provided steep rejection characteristics with 5-poles. Experimental results show excellent agreements with circuit simulation results in wide band and the validity of our circuit modeling for LPF design. The result shows another possibility of Quad Spiral DGS for microwave devices.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1281-1286
• /
• 2014

This paper presents an iterative learning control (ILC) approach for tracking problems with specified data points that are desired points at certain time instants. To design ILC systems for such problems, unlike traditional ILC approaches, an algorithm which updates not only the control signal but also the reference trajectory at each trial will be developed. The relationship between the reference trajectory and ILC control in tracking problems where there are specified data points through which the system should pass is investigated as the rate of convergence. In traditional ILC, the desired data is stored in a tracking profile file. Due to the huge size of the data file containing the target points, it is important to reduce the computational cost. Finally, simulation results of the presented technique are mentioned and compared to other related works to confirm the effectiveness of proposed scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권9호
• /
• pp.2218-2230
• /
• 2012

In this paper, we propose an efficient channel delay estimation method for orthogonal frequency-division multiplexing (OFDM) systems, especially over doubly-selective fading channels which are selective in both the symbol time domain and subcarrier frequency domain. For the doubly-selective fading channels in single frequency network (SFN), long and strong echoes exist and thus the conventional discrete Fourier Transform (DFT) based channel delay estimation system often fails to produce the exact channel delay profile. Based on the analysis of the discrete-time frequency response of the channel impulse response (CIR) coefficients in the DFT-based channel delay estimation system, we develop a method to effectively extract the true CIR from the aliased signals by employing a simple narrow-band low-pass filter (NB-LPF). The performance of the proposed system is verified using the COST207 TU6 SFN channel model.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.340-345
• /
• 2008

A computer program, which simulates the parall flow evaporator was developed. The program was having used to simulate the sample $650\;mm{\times}190\;mm$ frontal area, 25 mm flow depth and 3.0 mm fin pitch. It was shown that the cooling capacity of 3kW could be available from the sample. The present model, however, does not consider refrigerant mal-distribution in each pass, which is known to reduce the cooling capacity of the parallel flow heat exchanger.

• ETRI Journal
• /
• 제24권2호
• /
• pp.131-141
• /
• 2002

This paper considers a routing and wavelength assignment problem (RWAP) for the implementation of efficient Wavelength Division Multiplexing all-optical mesh networks without wavelength conversion. For a given physical network and required connections, the solution to the RWAP consists in how to select a suitable path and wavelength among the many possible choices for each connection so that no two paths using the same wavelength pass through the same link, while minimizing the number of required wavelengths. We introduce an integer programming formulation of the RWAP, which has an exponential number of variables, and propose an algorithm to solve it based on the column generation technique. The proposed algorithm can yield high quality solutions and tight lower bounds at the same time. Though the proposed algorithm cannot guarantee optimal solutions, computational results show that the algorithm yields provably good solutions within a reasonable time.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.614-625
• /
• 2008

The project of Construction of Siem Reap bypass road in Cambodia consists of alignment improvement of existing route, extension of width of road and laterite paving. This project is carried out by fast-track method on the design and construction for bypass road of 15.2 km length and 8m width for five months. Though some difficulties for the construction works such as the location of borrow pit and rock source, rainy seasons etc, the construction could be completed successfully owing to the cooperation of related authorities, company and residents. This 2 way Angkor detouring road will function as industrial roads in Siemreap region. These new two roads will not only bring better logistics requirements and safety, but also impact to poverty alleviation and preservation the beauty of the ecological environment of Angkor region. The basic information related to geotechnical engineering of this project is introduced.