• 열처리공학회지
• /
• 제30권5호
• /
• pp.207-214
• /
• 2017

In this study, failure behavior of piercing plug for seamless tube manufacturing process was studied. Three different kinds of passed piercing plugs (10, 90, 215 times) were prepared. The shape deformation of the passed piercing plugs was observed by 3D coordinate measuring machine, and the oxidized layer on the surface of piercing plug was observed by optical microscopy. The length reduction of piercing plug presented at 215 times passed plug. It was found that the oxidized layer consisted of outer scale, inner scale and internal oxidation layers, and the inner scale layer had vertical cracks, and interfaces had horizontal cracks. We proposed the failure mechanism of piercing plug during seamless tube manufacturing process based on the formation of vertical and horizontal crack.

• Journal of the Optical Society of Korea
• /
• 제13권4호
• /
• pp.423-427
• /
• 2009

The results of the experimental and theoretical studies conducted on terahertz filtering using two parallel-plate waveguides (PPWGs) are presented herein. The first PPWG with 355 ${\mu}m$ plate separation generates 4 THz bandwidth TM modes ($TM_0,\;TM_2,\;and\;TM_4$), whereas the second PPWG with 100 ${\mu}m$ plate separation operated the THz filter for the generated TM modes with 1.5 THz cutoff frequency. The outgoing THz wave of the two PPWGs was truncated until 1.5 THz, and the system was operated using a high-pass THz filter. The absorption and dispersion of the combined TM and TE modes for the filtering system were calculated. The theoretical calculation and measurement results for the cutoff and oscillation frequency in the spectrum domain agreed well.

• Journal of KIEE
• /
• 제10권1호
• /
• pp.1-6
• /
• 2000

This paper represents the design of 3D endoscopic video system in order to improve visualization and enhance the ability of the surgeon to perform delicate endoscopic surgery. In comparison of the polarized and electric shutter-type stereo imaging system, The former is superior in terms of accuracy and performance speed for knot-tying and loop pass test. The result of experiments show that the proposed 3D endoscopy system has a wide viewing angle and zone which is necessary for multi-view and it has better image quality and stability of the optical performances than the electric shutter-type does.

• KIEE International Transactions on Power Engineering
• /
• 제3A권2호
• /
• pp.70-78
• /
• 2003

This paper describes a transformer protection relay based on induced voltages. The ratio of the induced voltages of the primary and secondary windings is equal to the turns ratio during normal operating conditions such as magnetic inrush, overexcitation, and steady state, but it differs from the turns ratio in the case of internal faults. For a single-phase and a three-phase Y-Y transformer, the induced voltages are estimated and the ratios are compared with the turns ratio. For three-phase Y-Δ transformers, the differences between the induced voltages are estimated to use the line currents because delta-winding currents are practically unavailable. The proposed relay is tested under various conditions such as magnetic inrush, internal winding faults, overexcitation, and different core characteristics. The results evidently indicate that the relay successfully discriminates internal faults from magnetic inrush and overexcitation. This paper concludes by implementing the relay into a TMS320C6701 digital signal processor and reports satisfactory results. The relay requires no hysteresis data and can reduce the operating time of a relay.

• Journal of the Optical Society of Korea
• /
• 제17권4호
• /
• pp.312-316
• /
• 2013

A novel fiber-optic sensor system is suggested in which fiber Bragg grating sensors are demodulated by a wavelength-sweeping fiber laser source and a spectrometer. The spectrometer consists of a diffraction grating and a 512-pixel photo-diode array. The reflected Bragg wavelength information is transformed into spatial intensity distribution on the photo-diode array. The peak locations linearly correspond to the Bragg wavelengths, regardless of the nonlinearities in the wavelength tuning mechanism of the fiber laser. The high power density of the fiber laser enables obtaining high signal-to-noise ratio outputs. The improved demodulation characteristics were experimentally demonstrated with a fiber Bragg grating sensor array with 5 gratings. The sensor outputs were in much more linear fashion compared with the conventional tunable band-pass filter demodulation. Also it showed advantages in signal processing, due to the high level of photo-diode array signals, over the broadband light source system, especially in measurement of fast varying dynamic physical quantities.

• 한국산림과학회지
• /
• 제99권5호
• /
• pp.762-769
• /
• 2010

The composition of minerals and amino acids in Allium victorialis var. platyphyllum tissues collected from different habitats in Ulleung Island and Mt. Hambeak of the Korean Peninsula is investigated. The mineral composition of A. victorialis stem was high compared to that of bulb in all population samples. The most abundant mineral found in all the samples was potassium (K). The mineral composition was variable in garlic population of Ulleung Island in a habitat dependent manner. The A. victorialis stems and bulbs showed significant differences in their amino acid compositions according to varying habitats of Ulleung Island and Mt. Hambeak. Among the amino acids the most abundant amino acid in A. victorialis bulb tissue was arginine, followed by leucine and valine. The amino acids leucine, valine, and phenylalanine were abundant in stem tissues. The total amino acids of the A. victorialis stem tissue from Teawha pass peak sample (837 mg/100 g dry wt) were higher than the mean of other population samples (355-824 mg/100 g dry wt). However, content of amino acids in the bulb was high in A. victorialis from Nari basin (1,919 mg/100 g dry wt).

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.11-18
• /
• 2013

PURPOSES : This study presents the noise level and frequency characteristics investigated in the national highways with the consideration of various measuring conditions and/or methods. METHODS : The noise levels on the asphalt concrete pavement(ACP) and the jointed plain concrete pavement(JPCP) of the national highway were measured and analysed with respect to three variables, i.e., pavement type, surface condition, and measurement distance. The PASS-By method is utilized for the noise measurement and then using CPB spectrum analysis method with 1/3 octave bandwidth, the noise levels and frequency characteristics were calculated for two-second periods before and after the peak noise. RESULTS : Depending on the pavement type, the noise level was changed as the average noise levels are 73.3dB(A) and 78.3dB(A) for ACP and JPCP, respectively. With respect to the effect of surface condition, the average noise levels for crack H(high), M(medium), and L (low) sections are 77.4dB(A), 77.4dB(A), and 78.1dB(A), respectively. Regarding the measurement distance, 1.2meter difference in measuring location reduces 1.6dB(A) of noise level; the average noise levels at 5.3m and 7.5m from the centerline of outer lane are 72.8dB(A) and 71.2dB(A), respectively. It should be noted that the noise levels are slightly different as a function of vehicle speed and type. However, the overall trends for each case was similar. It was found that the domain frequency bands for ACP and JPCP were 400Hz~2000Hz and 500Hz~2000Hz, respectively. CONCLUSIONS : Based on the analysis with the measured noise date from national highway, it was concluded that the noise level and frequency band vary depending on the various conditions. It was also found that some variables significantly affect the noise level while others do not. With further systematic investigation, the comprehensive noise characteristics on the national highway can be achieved. Using such database, it is possible to develop the fundamental noise reduction technology.

• 한국초지조사료학회지
• /
• 제43권3호
• /
• pp.168-176
• /
• 2023

Silicon (Si) has the potential to improve plant growth and stress tolerance. The study aimed to explore Si-involving plant responses and molecular characterization of different Si-responsive genes in alfalfa. In this study, the exogenous supplementation of Si enhanced plant growth, and biomass yield. Si-acquisition in alfalfa root and shoot was higher in Si-supplemented compared to silicon deficient (-Si) plants, implying Si-acquisition has beneficial on alfalfa plants. As a consequence, the quantum efficiency of photosystem II (Fv/Fm) was significantly increased in silicon-sufficient (+Si) plants. The quantitative gene expression analysis exhibited a significant upregulation of the Lsi1, Lsi2, Lsi3, NIP5;1, and NIP6;1 genes in alfalfa roots, while BOR1, BOR4, NIP2, and NIP3 showed no significant variation in their expression. The MEME results further noticed the association of four motifs related to the major intrinsic protein (MIP). The interaction analysis revealed that NIP5;1 and Lsi1 showed a shared gene network with NIP2, BOR1, and BOR4, and Lsi2, Lsi3 and NIP3-1, respectively. These results suggest that members of the major intrinsic proteins (MIPs) family especially Lsi1, Lsi2, Lsi3, NIP5;1, and NIP6;1 genes helped to pass water and other neutral solutes through the cell membrane and those played significant roles in Si uptake and transport in plants. Together, these insights might be useful for alfalfa breeding and genome editing approaches for alfalfa improvement.

• 한국재료학회지
• /
• 제30권10호
• /
• pp.533-541
• /
• 2020

UO₂ kernels, a key component of fuel elements for high temperature gas cooled reactors, have usually been prepared by sol-gel methods. Sol-gel processes have a number of advantages, such as simple processes and facilities, and higher sphericity and density. In this study, to produce 900 ㎛-sized UO₂ particles using an external gelation process, contact length extension of the NH₃ gas of the broth droplets pass and the improvement of the gelation device capable of spraying 14 M-NH₄OH solution are used to form 3,000 ㎛-sized liquid droplets. To produce high-sphericity and high-density UO₂ particles, HMTA, which promotes the gelation reaction in the uranium broth solution, is added to diffuse ammonium ions from the outside of the gelation solution during the aging process and generate ammonium ions from the inside of the ADU gel particles. Sufficient gelation inside of ADU gel particles is achieved, and the density of the UO₂ spheres that undergo the subsequent treatment is 10.78 g/㎤; the sphericity is analyzed and found to be 0.948, indicating good experimental results.

• 대기
• /
• 제29권5호
• /
• pp.599-607
• /
• 2019

The change and periodicity of Korean winter temperature in the period 1979-2018 are investigated. It is shown that the winter temperature is on a long-term rise, with two regime shifts of winter temperature during 40 years. In addition, the decrease in cold days is confirmed along with the rise in temperature. Analysis of the periodicity of daily temperature in winter is carried out by means of power spectral analysis. Of the spectral peaks that are statistically significant, the most frequent detection exists on the time scale between 7 and 8 days. It is found that the number of significant periods have decreased since 2014, particularly no longer existent around the period of 7 day. The longer periods than 7 days gradually increase during 40 years, while the shorter periods show the tendency of decrease but recently rebound. Spectral analysis calculated from high/low-pass filtered daily temperature data also shows similar results.