• Journal of Ocean Engineering and Technology
• /
• v.24 no.2
• /
• pp.62-66
• /
• 2010

The goal of this work is to establish the reliability of FCA welded joints for high strength EH36-TMCP ultra thick plate. For this, heat conduction and thermo elasto-plastic analyses have been conducted on a multi-pass, X-groove, butt-joint model to clarify the thermal and mechanical behavior (residual stresses, magnitude of the stresses, and their production and distribution mechanisms) of the weld joint. In addition, the results of the welding residual stress obtained from thermo elasto-plastic analysis was verified and compared with results obtained by XRD analysis.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.98-103
• /
• 2008

This paper is to discuss distribution of welding residual stresses of a ferritic low alloy steel nozzle with dissimilar metal weld using Alloy 82/182. Two dimensional (2D) thermo-mechanical finite element analyses are carried out to simulate multi-pass welding process on the basis of the detailed and fabrication data. On performing the welding analysis generally, the characteristics on the heat input and heat transfer of weld are affected on the weld residual stress analyses. Thermal analyses in the welding heat cycle process is very important process in weld residual stress analyses. Therefore, heat is rapidly input to the weld pass material, using internal volumetric heat generation, at a rate which raises the peak weld metal temperature to $2200^{\circ}C$ and the base metal adjacent to the weld to about $1400^{\circ}C$. These are approximately the temperature that the weld metal and surrounding base materials reach during welding. Also, According to the various ways of appling the weld heat source, the predicted residual stress results are compared with measured axial, hoop and radial through-wall profiles in the heat affected zone of test component. Also, those results are compared with those of full 3-dimensional simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.546-555
• /
• 2013

In this paper, we propose a novel method to enhance the harmonic components from the frequency lines of the passive sonar signals. For this, we first separate the stable frequency lines from unstable ones using mean and difference of spectral bins in the vernier analysis. Then we emphasize the harmonic components using autocorrelation-based postprocessing, and enhance them by reducing the background noise with the split-window two pass mean algorithm. Experimental results for real underwater acoustic data are presented with our discussions.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.49-57
• /
• 2001

In this study, the residual stress fields of multi-pass welded were analyzed by FEA under various geometrical conditions. In order to estimate the effects of pipe geometries on residual stress distribution, welding processes of each model were performed under the same heat cycles. And then, the influence of cutting off the weld bead on the residual stress redistribution was also estimated. From the results, in the range of t/D=0.05, axial residual stresses on the outer surface of the welded pipe were linearly decreased with pipe diameter increase. On the other hand, hoop residual stresses were not influenced by them. And both axial and hoop residual stresses on the outer surface of the welded pipe were increased with pipe diameter increase. But, when t/D was smaller than 0.05, they were converged in the nearly same value. The maximum residual stresses were generated at around HAZ. It in therefore necessary to consider them in welding design, strength evaluation, and analysis of fracture characteristics.

• Korean Journal of Child Studies
• /
• v.31 no.4
• /
• pp.139-157
• /
• 2010

This study investigated the cognitive process of 5-year-old children, with a particular focus on gender, monthly age, and their tendencies towards hyperactivity through the performance of the Cognitive Assessment System (CAS; Das & Naglieri, 1997). The children with tendencies towards hyperactivity were identified based on Conners Teachers' Rating Scale (CTRS). The subjects were 75 five-year-old children in Seoul and surrounding metropolitan areas. Data were analyzed by means of descriptive statistics, an independent sample t-test, Pearson's correlation coefficient, one-way ANOVA, and by K-mean cluster analysis. Our results were as follows : (1) The CAS and CTRS' sub-factors were correlated negatively, except the positive correlation between planning factor and hyperactivity factor. (2) Girls exhibited significantly higher CAS scores in planning & sequential processing than boys. (3) The upper monthly age group (68-71 months) showed significantly higher score in terms of planning than the lower monthly age group (60-63 months). (4) The CAS scores of the children with tendencies towards hyperactivity was lower than that of normal children. (5) The CAS profile of 5-year-old children was divided into 4 groups with distinctive characteristics by means of K-mean cluster analysis.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.31-38
• /
• 2008

This Study discussed the roll forming process analysis of levitation rail for urban Maglev vehicle. To verify validity of roll forming process, we analyzed roll forming process for track shoe which is similar to levitation rail. The analysis process was composed of 12 passes and was performed for only 8 passes except overlapping passes. In the variation of temperature with each pass, surface temperature of the structure was cooled from initial $1200^{\circ}C$ to $1010^{\circ}C$ during 30 second before first pass, and central temperature and surface temperature was cooled to $980^{\circ}C$ and $900^{\circ}C$ in final pass, respectively. A length of structure after final pass is about 5 times longer than that before roll forming process. A strain of structure had a higher value in the inner part of the track shoe and show from minimum 2.5 to maximum 6.5. A torque applying on roll appear high in 2, 3 and 4 passes and a maximum value was $27,000ton{\cdot}mm$. Also it was analyzed that a load to the normal direction needs maximum 300ton.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.26-34
• /
• 2007

This Paper describes a chip design technique for body composition analyzer based on the BIA (Bioelectrical Impedance Analysis) method. All the functions of signal forcing circuits to the body, signal detecting circuits from the body, Micom, SRAM and EEPROMS are integrated in one chip. Especially, multi-frequency detecting method can be applied with selective band pass filter (BPF), which is designed in weak inversion region for low power consumption. In addition new full wave rectifier (FWR) is also proposed with differential difference amplifier (DDA) for high performance (small die area low power consumption, rail-to-rail output swing). The prototype chip is implemented with 0.35um CMOS technology and shows the power dissipation of 6 mW at the supply voltage of 3.3V. The die area of prototype chip is $5mm\times5mm$.

• Journal of the Korean Geographical Society
• /
• v.51 no.1
• /
• pp.127-142
• /
• 2016

This paper analyzes on the physical place name of Mt. Seoraksan in Joseon period from the historical geographical perspective. The analysis materials are Jirijis, old maps and travel records of Joseon period. The results are as follows. The space range of Mt. Seoraksan in Joseon period and today was different. Mt. Seoraksan in Joseon period was around Daecheongbong Peak nowadays, Ulsanbawi Rock was Mt. Cheonhusan, and north mountain range of Hangyeryeong Pass called Mt. Hangyesan. Region of Mt. Seoraksan and Mt. Hangyesan were devided in Joseon Period. Mt. Seoraksan name was representative in late Joseon period including Mt. Hangyesan and Mt. Cheonhusan. Mountain names were the most in the physical place name. The old name of Hangyeryeong Pass was Osaek Pass in maps of Joseon Period. The popular travel course of Mt. Seoraksan in Joseon period was Baekdamsa Temple-Oseam Temple-Sinheungsa Temple.

• Journal of the Korean Dietetic Association
• /
• v.26 no.4
• /
• pp.243-253
• /
• 2020

The purpose of this study was to set new guidelines for adenosine triphosphate (ATP) bioluminescence hygiene monitoring of distribution trays at children's foodservices. Five dietitians visited 223 foodservices (95 institutional, 128 small) to examine whether they adhered to the norms of 'Keeping distribution tray sanitary by washing/sanitizing' and 'Performing food distribution in a clean and appropriate way'. In this visit, dietitians swabbed 100 ㎠ area of the distribution trays twice, once for obtaining ATP measurements and the second time for Aerobic Plate Counts (APC) using 3M Petrifilm Plates. Chi-square test and ANOVA were applied using SPSS 23.0 software. SPSS 23.0 was used to conduct graphical and statistical analysis of the raw data of ATP measurements, which were further transformed by a Box-Cox transformation. The mean of APC from all the subjects inspected was 3.8×10²±2,102.0 CFU/100 ㎠. A total of 208 (93.3%) trays were observed within the acceptable limits of APC (Pass<5.0×10² CFU/100 ㎠). APCs taken at institutional foodservices showed significantly lower levels (1.4×10²±600.0 CFU/100 ㎠, P<0.01) compared to the small foodservices (5.5×10²±2,718.7 CFU/100 ㎠). No significant differences were observed between the two groups in ATP measurements and in the performance rate of 2 checklist items. As against the 93.3% APC adequacy from the total subjected inspection, total ATP adequacy (Pass≤300 RLU/100 ㎠) was only 71.7%. Therefore, more practical guidelines should be prepared for the assessment of the hygiene of distribution trays. In the graphical and statistical analysis, levels below 250 RLU/100 ㎠ was considered 'Pass', while equal to or greater than 350 RLU/100 ㎠ was considered 'Fail' for distribution trays.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.314-322
• /
• 2019

A worsened drought in Chungnam province of Korea due to climate change and increasing water demand at Daesan industrial complex have motivated the 100,000 ㎥/d seawater desalination project. In this study, therefore, the comprehensive analysis of parameters affecting the reverse osmosis (RO) performance was conducted. Under the various conditions of feedwater salinity and temperature in Daesan, energy consumption was calculated as 2.39 ± 0.13 kWh/㎥. The decrease in membrane flux and recovery rate positively impacted annual operation cost. The average total dissolved solids (TDS) of the permeate and energy consumption with highly permeable membrane according to the membrane manufacturer were 3.84 mg/L and 2.22 ± 0.13 kWh/㎥, respectively. In addition, energy saving up to 0.29 kWh/㎥ or cost reduction of membrane module up to 15.6% is expected by changing the RO configuration from full two pass to partial or split partial two pass.