• 박물관보존과학
• /
• 제11권
• /
• pp.31-42
• /
• 2010

국립춘천박물관이 소장한 서대(犀帶)의 보존처리 과정과 제작기법에 대해 소개하고자 한다. 서대는 가죽으로 된 틀을 직물로 감싸고 물소뿔과 금속테로 만든 띠돈을 장식한 형태이다. 가죽간의 접착력이 약화되어 분리가 진행중이고 서각의 일부가 탈락되었으며 직물의 변·퇴색이 진행되고 있다. 또한 금속테 부분과 띠돈을 연결한 금속사가 심하게 부식되었다. 금속부분의 성분분석을 위해 이동형 X-선형광분석기를 이용하여 비파괴 분석을 실시하였고 전체를 해체하여 재질에 따른 보존처리를 실시하고 다시 재결합하는 방법으로 보존처리를 진행하였다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2023년도 임시총회 및 춘계학술대회
• /
• pp.62-62
• /
• 2023

Zanthoxylum piperitum ("chopi" in Korean) has been used as traditional medicinal plants with high anti-inflammatory, antioxidant, and antifungal activities. The aims of the study were to identify marker compounds and to investigate metabolites variation of chopi according to different parts and harvest times. Every month from June to September, chopi were harvested with three different parts: leaves, leaf-twig mixtures, twigs. Using liquid chromatography-tandem mass spectrometry (LC-MS/MS), two main marker compounds (quercitrin and quercetin-3-O-glucoside) were characterized in 70% ethanol extracts of chopi. Quantification of the two marker compounds were subsequently conducted by high performance liquid chromatography (HPLC), representing that contents of these compounds were higher in leaves and leaf-twig mixtures rather than twigs. For the comprehensive analysis of metabolites associated with production of marker compounds, 35 primary metabolites were identified using gas chromatography-mass spectrometry (GC-MS). Multivariate analysis results represented that plant parts were main contributors to the separation of chopi. However, significant differences were not observed between leaves and leaf-twig mixtures samples. The partial least square (PLS) predictive model revealed that monosaccharides (fructose, galactose, glucose, mannose, xylose) and branched-chain amino acids (isoleucine, valine, leucine) were important determinants for the production of marker compounds together with alanine, inositol, GABA, and theronic acid. This study could be extended to stabilize and utilize chopi as an industrial material, as well as to find good candidates with various nutritional traits.

• 방송공학회논문지
• /
• 제9권1호
• /
• pp.9-16
• /
• 2004

본 논문에서는 차량용 음성명령어기의 사용을 위한 전처리 과정으로 음성개선 방법을 다룬다 특히 보다 주위 소음에 자유롭고 단말 조작에 있어 안정성을 보장하기 위하여 일반적 단일 마이크로폰으로 처리되는 잡음뿐만 아니라 음성명령어를 제외한 오디오 신호 등 비정적 통계적 특성을 갖는 소음들도 제거 될 수 있도록 음성개선 방법을 제안한다. 우리는 2개의 마이크로폰을 가지고 BSS 알고리즘을 적용하여 비정적 신호들을 분리하고, 분리된 신호에 대하여 Kalman 필터를 이용하여 시간상 단구간 정적 잡음을 제거한다. 인식 실험 결과를 통하여 공간적, 시간적 음성개선 방법이 순차적으로 적용될 때, 실제 차량 환경에서 음성 개선 알고리즘으로 적용될 수 있음을 보였다.

• 자원리싸이클링
• /
• 제22권1호
• /
• pp.3-10
• /
• 2013

본 발표는 국내 흑색 점판암으로부터 우라늄 및 바나듐 회수의 일반적인 현황 및 연구개발에 관한 내용이다. 우라늄 화합물(yellow cake)의 세계적인 수급 및 향후 전망뿐만 아니라, 국내 우라늄광의 매장량, 품위 및 특성에 대해 설명하였다. 그리고 국내 우라늄광의 기술개발에 관한 기 연구 실적 및 수행중인 연구과제의 개략적인 내용에 대해 기술하였다. 또한, 우라늄 및 바나듐 성분이 함유된 국내 흑색 점판암을 대상으로 하여 침출, 분리정제 및 회수에 관한 기술을 하였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년 추계학술발표대회 논문집
• /
• pp.475-478
• /
• 2008

In Korea, there has been a tendency that multi-family housings are constructed by providers such as constructors or real estate agents for the economical benefits and selling efficiency, using standardized plans, load-bearing wall system, water-based construction method, and uniformized formworks. Especially, the traditional installation works which service equipments are buried into structures cause serious problems such as shortening building life span, increasing times of remodeling during specific period (100 years) and wasting resources. Also the unilateral way of massive distribution by providers for multi-family housings is not appropriate to meet the various social needs of residents. To solve these problems, it is necessary to build long-life housing which can be easily separated installations, interior and exterior finishings from structural parts. Therefore, this paper will examine the present administrative law and the civil law in order to find negative factors that can be obstructions for providing long-life housings and set the direction to revise the regulations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.44-44
• /
• 2010

Conventional water treatment facilities like precipitation process need large-scale equipment and wide space to purify the wastewater of paper factory. In case of massive waste water, high gradient magnetic separation (HGMS) parts are more effective to purify it rapidly and to occupy relatively small space, since large voids at filter with HGMS are adopted. Cryo-cooled Nb-Ti superconducting magnet with room temperature bore in diameter of 100 mm and 600 mm in height was used for magnetic separator. Magnetic filters were designed by the analysis of magnetic field distribution at superconducting magnets.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.778-784
• /
• 2001

Injection molding is a very important industrial process for the manufacturing of plastics objects. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of weld-line parts in injection-molded products is assessed. And the effects of fiber content and injection molding conditions on the fiber orientation functions are also discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권5호
• /
• pp.85-96
• /
• 1992

Engine enclosures are widely adopted to reduce the noise emission in various fields of application. The radiated noise, which is due to the vibration of enclosure's outer surface, is composed of two kinds of sound power with different path of propagation. One is the 'structure-borne sound power' which stems from the engine's vibratory force applied to the structure of enclosure through the mounting parts of engine etc., while the other is the 'air-borne sound power' which is originated by the sound power radiated from the engine surface to the inner space of enclosure that should excite the vibration of enclosure from inside. In order to get a most efficient engine enclosure is required a profound consideration upon the above structure-borne and air-borne noise, since the guiding principle of countermeasure for each noise is quite different. The controlling of input vibration and its isolation are major subject for the structure-borne sound power and the specifications of absorbing member and damping panels are the major interests for the air-borne sound power. Hence it seems very efficient to separate the total sound power into two categories with a great accuracy when one think of further reduction of engine noise from the exciting enclosure, however, its separating methods have not been made clear for many years. Then author proposes a new practical separation method of two propagation path's contribution to the total radiation sound power for the enclosure under the engine operating condition.

• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.73-80
• /
• 2005

Injection molding is the most widely used process for the industrial forming of plastic articles. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of welding parts in injection-molded products is assessed. And the effects of fiber content and injection mold shapes on the fiber orientation in case of fiber reinforced polymeric composites are studied experimentally.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.401-407
• /
• 2012

The recent manufacturing process in the thin wafers and flat panel necessitate new approaches to reduce handling fragile and surface-sensitive damage of components. This paper presents a new pneumatic levitation for non-contact handling of parts and substrates. This levitation can achieve non-contact handling by blowing air into an air pressure pick-up head with radial passages to generate a negative pressure region. Negative pressure is caused by the radial air flow by nozzle throat and through holes connecting to the bottom region. The numerical analysis deals with the levitational motion with different design factors. The dynamic motion is examined in terms of force balance(dynamic equilibrium) occurring to the flow field between two objects. The stable equilibrium position and the safe separation distance are determined by analyzing the local pressure distribution in the fluid motion. They make considerable design factors consisting the air pressure pick-up head. As a result, in case that the safe separation distance is beyond 0.7mm, the proposed pick-up head can levitate stably at the equilibrium position. Furthermore, it can provide little effect of torque, and obtain more wide picking region according to the head size.