• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.689-694
• /
• 2014

DDoS attacks on MANET makes disable any node which support network function, cause critical results as a stopping of entire network service or separation to some parts. Packet aggregation, which gather some pieces of short length into a certain length of data, improves transmission performances on MANETs. In this paper, some effects on transmission performance of packet aggregation transmission be caused by DDoS Attacks are measured and analyzed in point of end-to-end level. MANET simulator, based on NS-2, is used for measurement end-to-end performances. MOS, connection rate, delay and packet loss rate is used as performance parameters. VoIP traffic is used for object service measurement. Finally, it is suggested that number of packet aggregation is more then 4 for keeping the transmission quality over MANETs under DDoS attacks.

• Fashion & Textile Research Journal
• /
• v.11 no.1
• /
• pp.24-32
• /
• 2009

The purpose of this study is to understand characteristic of expression in Korean style fashion design and investigated Korean style fashion design's deployment and design idea method as well as its esthetic value. The photographs for the research were selected from fashion collections during S/S 2003-F/W 2007 by four specialists in the department of textile and then analyzed with 288 final data. The results were as followings. First, the characteristics of design expression in Korean style fashion design were formation by separating partial shape from the whole, formation by shape's separation and repetition, and connecting formation by combination and transformation of parts. In the case of color, they were direct expression, contrasting formative expression, and gradual changing expression. In the case of pattern, they were the methods of filling, filling & emptying, and partial filling. Second, the deployments of Korean style fashion design were adding modern elements to traditional things, combining traditional elements and modern things, and adding traditional elements to modern things. The third, Korean style fashion design's idea methods were weaving, snatching, adding, and changing. Fourth, it was shown that esthetic values of Korean style fashion design were the interactive organism by building organic relationship, the optimum expressing beauty with minimum elements, the palpitation having dynamics and rhythmical beauty.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.215-228
• /
• 2015

A creative innovation and an innovative problem-solving of industrial companies can be achieved by overcoming the challenges of technical and physical contradictions. The approaches to address conflicting and paradoxical problems, such as technical and physical contradictions have a crucial role in advancing the quality assessment for manufacturer and service provider. The term, technical contradiction, depicts the state that improvement of one ends of IFR (Ideal Final Result) leads to unfavorable condition of the other ends, and results in conflicting problem. Another type of contradictions that's discussed in this study is a physical contradiction which is due to two mutually opposing states of the means of ends, and gives paradoxical situation. By integrating the means-ends chain perspectives, the physical contradiction that is a specifically root-causes, "means", can be initially addressed to resolve the downstream problem of technical contradiction which represents a general and abstract goals, "ends". This research suggests IFR resolution processes to handle both physical contradiction of means and technical contradiction of ends by employing causal relationship with IFR, effects and causes. In summary, the study represents three major processes that resolve such contradictions are demonstrated as follows: 1) Derivation of causal and hierarchical relationship among IFR, ends and means by considering CAED (Cause-And-Effect Diagram) and LT (Logic Tree). 2) Identification of causal relationship between physical contradiction and technical contradiction by using TPCT (TRIZ Physical Contradiction Tree) and TCD (Technical Contradiction Diagram). 3) Application of integrated TRIZ principles by classifying 40 inventive principles into 4 general conditions of the separation principle of mutually opposite states in space, in time, based on conditions, and between the parts and the whole. In order to validate the proof of proposed IFR resolution processes, the analysis of the TRIZ case studies from National Quality Circle Contest in the years, 2011 to 2014 have been proposed. The suggested guidelines that are built based on TRIZ principles can uniquely enhance the process of quality innovation and assessment for quality practitioners.

• Journal of architectural history
• /
• v.16 no.1
• /
• pp.83-99
• /
• 2007

This study examines the joint and splice of wooden structure at Geunjeongjeon Hall of Gyengbok Palace, which was constructed in the late Joseon Dynasty. The scope of the study is on the part of columns, the bracket sets, and the frame structure. This research also deals with the relationship between vortical load and horizontal load. Firstly, the examination of the joint and splice methods between the pillar and penetrating ties is on the joint and splice methods of the outer and corner. Through the investigation, it is verified that the joint methods between pillar and penetrating tie on the outer and corner pillars is the method of Sagal joints(cross joints, 사개맞춤). Joints used between pillar and penetrating tie are dovetailed tenon joints, between columns and Anchogong(안초공), between columns and Choikgong(초익공) are tenon joint(장부맞춤). Secondly, the examination of the joint and splice methods of the bracket set is on that of Salmi and Cheomcha(첨차), and Salmi and Janghyeo(장혀). Joints used between Salmi and Cheomcha, Salmi and Janghyeo are halved joint, and between each Janghyeo are stepped dovetailed splice. It is Cheomcha that is used the Jujang-Cheomcha(주장첨차) on center line. Therefore it is connected with each bracket set, which gets to is the strong system, easy and convenient on the construction of that. Thirdly, the frame structure of wooden architecture in royal palace is consist of purlins and beams, Janghyeo(장혀, timber under purlin), tall columns, king posts, etc. Through the investigation, it is verified that the joint and splice methods between purlins and beams are used with the methods of Sungeoteok joint(숭어턱맞춤). It is verified that the joint and splice methods between beams and high columns are used with methods of mortise and tenon joint(장부맞춤), is highly related with tensile force. To reduce the separation of parts, sangi(산지) and tishoi(띠쇠) are used as a counterproposal, which were generally used for architecture in royal Palaces in the late Joseon Dynasty and continued to be used until these days common wooden architecture.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.2
• /
• pp.10-18
• /
• 2010

Scramjet engine is one of the core parts of hypersonic vehicle of next generation and being investigated by many countries. Korea Aerospace Research Institute performed a ground test of the model scramjet engine S1 in 2007. And, S2 model which is improved from S1 model in engine startability and thrust was tested with HIEST (High Enthalpy Shock Tunnel) at Kakuda Space Center of JAXA. Design condition of S2 model was Mach 6.7, however, it was tested at Mach 7.7 as an off-design condition test. As a test result, flow separation was found at the inside of the intake, but the engine showed stable combustion pressure distribution. Furthermore, compared to other test models, S2 model showed a good performance value in thrust and specific impulse.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.221-228
• /
• 2002

Thickness of concrete lining, voids at the back of lining or shotcrete are very important elements for inspecting the safety of tunnels. Therefore, the inspection of tunnel lining structure means to investigate the inner layer boundaries of the structure. For this purpose, seismic reflection survey is the most desirable method if it works in good conditions. However, the conventional seismic reflection method can not be properly used for investigating thin layers in the lining structure. In other words, to detect the inner boundaries, it is desirable for the wavelength of source to be less than the thickness of each layer and for the receiver to be capable of detecting high frequency(ultrasonic) signals. To this end, new appropriate source and receiver devices should be developed above all for the ultrasonic reflection survey. This paper deals primarily with the development of source and receiver devices which are essential parts of field measuring system. Interests are above all centered in both the radiation pattern, energy, frequency content of the source and the directional sensitivity of the receiver. With these newly devised ones, ultrasonic physical modeling has been performed on 3-D physical model composed of bakelite, water-proof and concrete, The measured seismograms showed a clear separation of wave arrivals reflected from each layer boundary. Furthermore, it is noteworthy that reflection events from the bottom of concrete below water-proof could be also observed. This result demonstrates the usefulness of the both devices that can be applied to benefit the ultrasonic reflection survey. Future research is being focus on dealing with at first an optimal configuration of source and receiver devices well coupled to tunnel wall, and further an efficient data control system of practical use.

• Journal of the Korean Institute of Educational Facilities
• /
• v.18 no.3
• /
• pp.13-21
• /
• 2011

Yanji city in China is a city most populated with Korean-chinese. This study is to examine architectural planning characteristics for Korean-chinese Elementary schools in Yanji city. Currently, this city includes nine Korean-chinese schools. This research has been processed with regards to three broad aspects. Firstly changing processes of school systems, secondly local distributions and networks of school facilities, and thirdly site plans, floor plans and elevations of school buildings were analyzed and examined for finding their characteristics. For this study, seven Han-chinese Elementary schools were also analyzed. The study result are as following: 1. Korean-chinese schools have followed national education policies and also maintained Korean-chinese native education methods. The schools have undergone merger and separation with Han-chinese Elementary schools. Three Korean-chinese Elementary schools in Japan Colonials, two schools in the period of the Republic of China foundation and its growing, and four schools in 1980s were founded. 2. Yanji city administers the networks of Korean-chinese school districts and Han-chinese districts separately. All school districts apply to lkm standard as attending distance. The networks are adjusted as per population change. 3. The characteristics of buildings' site plans, floor plans and elevations are simple. Layouts of the schools are - type or -type centered playground. Building plans show one side corridor type and 5 stories mostly. Elevations stress central parts. Various forms such as finger types do not appear in mass planning since the school curriculum and extracurricular activities are not seemingly active. Han-chinese Elementary schools have similar conditions.

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.78-87
• /
• 2018

This paper describes specular reflectance measurements of dielectric plates in three waveguide frequency bands: D-band (110-170 GHz), G-band (140-220 GHz), and J-band (220-325 GHz). The transmit (Tx) part of the proposed specular reflectance measurement system is stationary, while the receive (Rx) part and the material under test (MUT) holder are concentric-rotating with a 2:1 speed ratio for specular reflectance measurements. In specular reflectance measurements, the first step measures the specular reflection coefficients of an MUT and a metal plate on the MUT holder located at the center of the Tx and Rx parts, and the second step calculates the specular reflectance defined by the specular reflection power (i.e., intensity) of the MUT normalized to that of the metal plate. Multiple reflection effects between the Tx and Rx antennas and the MUT on the measured specular reflectance are minimized by averaging out the multiple specular reflectances measured with changing the separation distance between the two antennas by ${\lambda}/8$ intervals. Measurement results of the perpendicular-polarized specular reflectance of commonly used dielectric plates are verified by comparing those with the analytic results and show that the results measured over the overlapped frequency range of the D-/G-bands and at the boundary frequency of the G-/J-bands agree well with the results for the other band, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.5
• /
• pp.744-752
• /
• 2012

In this study, the Polynomial-based Radial Basis Function Neural Networks is proposed as an one of the recognition part of overall face recognition system that consists of two parts such as the preprocessing part and recognition part. The design methodology and procedure of the proposed pRBFNNs are presented to obtain the solution to high-dimensional pattern recognition problems. In data preprocessing part, Principal Component Analysis(PCA) which is generally used in face recognition, which is useful to express some classes using reduction, since it is effective to maintain the rate of recognition and to reduce the amount of data at the same time. However, because of there of the whole face image, it can not guarantee the detection rate about the change of viewpoint and whole image. Thus, to compensate for the defects, Linear Discriminant Analysis(LDA) is used to enhance the separation of different classes. In this paper, we combine the PCA&LDA algorithm and design the optimized pRBFNNs for recognition module. The proposed pRBFNNs architecture consists of three functional modules such as the condition part, the conclusion part, and the inference part as fuzzy rules formed in 'If-then' format. In the condition part of fuzzy rules, input space is partitioned with Fuzzy C-Means clustering. In the conclusion part of rules, the connection weight of pRBFNNs is represented as two kinds of polynomials such as constant, and linear. The coefficients of connection weight identified with back-propagation using gradient descent method. The output of the pRBFNNs model is obtained by fuzzy inference method in the inference part of fuzzy rules. The essential design parameters (including learning rate, momentum coefficient and fuzzification coefficient) of the networks are optimized by means of Differential Evolution. The proposed pRBFNNs are applied to face image(ex Yale, AT&T) datasets and then demonstrated from the viewpoint of the output performance and recognition rate.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.37-42
• /
• 2016

Highly efficient and environmentally friendly mechanical process was developed for the higher recovery rate and productivity in the recycling of waste jelly-filled communication cables. Only the simplest mechanical method was designed and built for a continuous process, further proved experimentally along with the addition of several parts such as brush-type rollers and scrappers. In this process, the recovery rate and productivity were 98% and 55 Kg/hr respectively. This process is thought to be simple but highly advanced method for the commercialization of green process.