• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.284-287
• /
• 1999

CuO catalyst-coated alumino-silicate fiber filters were prepared for the simultaneous removal of particulate matter and gaseous contaminants such as NOx and SOx. Hot gas cleaning experiments similar to Shell UOP process other than the catalyst supporting materials were carried out between 300 and $500^{\circ}C$ for the evaluation of the gas removal efficiency of the catalytic filter. Experimental results showed that removel efficiency for $SO_2$ was greater than 99% in the temperature range 450~$500^{\circ}C$ and more than 90% of NO was collected between 350 and $370^{\circ}C$. It was found that the higher the CuO content, the higher the removal efficiency for $SO_2$. Removal efficiency for NO was more affected by the gas cleaning temperature than by the CuO content in the catalyst-filter.

• 대한기계학회논문집B
• /
• 제28권2호
• /
• pp.167-173
• /
• 2004

Fouling of heat exchangers is generated by water-borne deposits, commonly known as foulants including particulate matter from the air, migrated corrosion produces; silt, clays, and sand suspended in water; organic contaminants; and boron based deposits in plants. The fouling is known to interfere with normal flow characteristics and reduce thermal efficiencies of heat exchangers. This paper describes the fouling analysis technique developed in this study which can analyze the thermal performance for heat exchangers and estimate the future fouling variations. To develop the fouling analysis technique fur heat exchangers, fouling factor was introduced based on the ASME O&M codes and TEMA standards. For the purpose or verifying the fouling analysis technique, the routing analyses were performed for four heat exchangers in several nuclear power plants; two residual heat removal heat exchangers of the residual heat removal system and two component cooling water heat exchangers of the component cooling water system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.699-704
• /
• 2001

Until recently, disposal to landfill has been the most convenient way to deal with the increasing amount of residues the shredding industries produce. But the shortage of such disposal sites and the risk that liquid drained from these waste dusts may pollute ground water have increased the environmental pressures to find more effective solutions. The present study is an alternative approach that suggests identifying waste dusts characteristics and selecting an appropriate binder for hazardous materials to reduce the amount of contaminants (mainly lead) that were leaking into the soil. Investigations on the characteristics of automobiles waste dusts show that these materials are composed mainly of cottons and sponge like substances, plastics, rubber, glasses and gravel, metals, and electric wires. Besides, the percentage in weight of organic (inflammable) materials is about 70% and the lead contamination, which has not a ionic but a particulate nature, is particularly remarkable in cottons and sponge like materials. Binding additives such as K-20 and sodium carbonate were not effective but the addition of 5 % of cement (in weight of the investigated sample) followed by a 3-minute stirring and a 4-hour storage could drastically reduce the run off of lead below the maximum authorized level. No addition of water was necessary in this method.

• 한국물환경학회지
• /
• 제31권4호
• /
• pp.367-376
• /
• 2015

The momentum and kinetic turbulent energy carried by the wind to a stratified lake lead to basin-scale motions, which provide a major driving force for vertical and horizontal mixing. A three-dimensional (3D) hydrodynamic model was applied to Lake Tahoe, located between California and Nevada, USA, to simulate the dominant basin-scale internal waves in the deep lake. The results demonstrated that the model well represents the temporal and vertical variations of water temperature that allows the internal waves to be energized correctly at the basin scale. Both the model and thermistor chain (TC) data identified the presence of Kelvin modes and Poincare mode internal waves. The lake was weakly stratified during the study period, and produced large amplitude (up to 60 m) of internal oscillations after several wind events and partial upwelling near the southwestern lake. The partial upwelling and followed coastal jets could be an important feature of basin-scale internal waves because they can cause re-suspension and horizontal transport of fine particles from nearshore to offshore. The internal wave dynamics can be also associated with the distributions of water quality variables such as dissolved oxygen and nutrients in the lake. Thus, the basin-scale internal waves and horizontal circulation processes need to be accurately modeled for the correct simulation of the dissolved and particulate contaminants, and biogeochemical processes in the lake.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2277-2288
• /
• 2021

To regulate the safety protocols in nuclear facilities, radioactive aerosols have been extensively researched to understand their health impacts. However, most measured particle-size distributions remain at low resolutions, with the particle sizes ranging from nanometer to micrometer. This study combines the high-resolution detection of 500 size classes, ranging from 6 nm to 10 ㎛, for aerodynamic diameter distributions, with a regional lung deposition calculation. We applied the new approach to characterize particle-size distributions of aerosols generated during the plasma arc cutting of simulated non-radioactive steel alloy wastes. The high-resolution measured data were used to calculate the deposition ratios of the aerosols in different lung regions. The deposition ratios in the alveolar sacs contained the dominant particle sizes ranging from 0.01 to 0.1 ㎛. We determined the distribution of various metals using different vapor pressures of the alloying components and analyzed the uncertainties of lung deposition calculations using the low-resolution aerodynamic diameter data simultaneously. In high-resolution data, the changes in aerosols that can penetrate the blood system were better captured, correcting their potential risks by a maximum of 42%. The combined calculations can aid the enhancement of high-resolution measuring equipment to effectively manage radiation safety in nuclear facilities.

• Tuberculosis and Respiratory Diseases
• /
• 제85권4호
• /
• pp.313-319
• /
• 2022

Environmental exposure to air pollution is known to have adverse effects on various organs. Air pollution has greater effects on the pulmonary system as the lungs are directly exposed to contaminants in the air. Here, we review the associations of air pollution with the development, morbidity, and mortality of pulmonary diseases. Short-and long-term exposure to air pollution have been shown to increase mortality risk even at concentrations below the current national guidelines. Ambient air pollution has been shown to be associated with lung cancer. Particularly long-term exposure to particulate matter with a diameter <2.5 ㎛ (PM_2.5) has been reported to be associated with lung cancer even at low concentrations. In addition, exposure to air pollution has been shown to increase the incidence risk of chronic obstructive pulmonary disease (COPD) and has been correlated with exacerbation and mortality of COPD. Air pollution has also been linked to exacerbation, mortality, and development of asthma. Exposure to nitrogen dioxide (NO₂) has been demonstrated to be related to increased mortality in patients with idiopathic pulmonary fibrosis. Additionally, air pollution increases the incidence of infectious diseases, such as pneumonia, bronchitis, and tuberculosis. Furthermore, emerging evidence supports a link between air pollution and coronavirus disease 2019 transmission, susceptibility, severity and mortality. In conclusion, the stringency of air quality guidelines should be increased and further therapeutic trials are required in patients at high risk of adverse health effects of air pollution.

• 생명과학회지
• /
• 제34권1호
• /
• pp.68-77
• /
• 2024

다양한 원인에 의하여 발생하는 미세먼지(particulate matter, PM)는 강력한 환경 오염 물질로 대두되고 있다. PM은 서로 다른 구성과 크기의 고체 입자와 액체 방울로 구성되며, 유해 화학 성분에는 원소 및 유기 탄소, 유기 화합물, 생물학적 화합물 및 금속이 포함된다. 급성 및 만성 PM 노출 시 생체 내 생리학적 시스템에 의하여 유입되고 축적되어 세포내 소포체 스트레스, 미토콘드리아 기능 장애, 산화 스트레스, 염증, 지질 축적 및 세포 주기 정지와 함께 세포 구조 변화를 촉진한다. 궁극적으로 이러한 세포 반응은 노화의 주요 특성을 발달시키는 원인으로 작용하며, 세포 노화와 관련된 자가포식 플럭스 및 리소좀 기능 장애를 향상시킨다. 선행 연구에서 PM과 사망률 증가 또는 수명 감소 사이의 긍정적인 연관성을 강조했지만, 노화에 대한 PM의 직접적인 증거는 여전히 제한적이다. 이 총설에서는 관찰 연구뿐만 아니라 노화 진행 및 연령 관련 질병 발병에 대한 PM의 시험관 내 및 생체 내 증거를 평가하였다. 이러한 평가는 소포체 스트레스, 미토콘드리아 기능 장애, 산화 스트레스, 염증, 지방 축적, 자가포식을 포함하여 PM 노출과 노화 사이의 연관성을 강화하는 연령 관련 세포 변화를 기반으로 한다. 이러한 자료는 PM에 따른 기본적인 세포 반응의 이해를 토대로 PM으로 인한 노화에 대한 새로운 치료법 개발에 기여할 수 있을 것이다.

• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.380-391
• /
• 2015

Objectives: The objective of this study is to assess airborne particulate matter pollution and its effect on health of residents living near Ansim Briquette Fuel Complex and its vicinities. Also, this study measured and analyzed the concentration of TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals which influences on the environmental and respiratory disease in Ansim Briquette Fuel Complex, Daegu, Korea. Methods: In this study, we analyzed various environmental pollutants such as particulate matter and heavy metals from Ansim Briquette Fuel Complex that adversely affected local residents's health. In particular, we verified the concentration distribution and characteristics of exposure for TSP, $PM_{10}$, and $PM_{2.5}$ among particulate matters, and heavy metals(Cd, Cr, Cu, Mn, Ni, Pb, Fe, Zn, and Mg). In that regard, the official test method on air pollution in Korea for analysis of particulate matter and heavy metal in atmosphere were conducted. The large capacity air sampling method by the official test method on air pollution in Korea were applied for sampling of heavy metals in atmosphere. In addition, we evaluated the concentration of seasonal environmental pollutants for each point of residence in Ansim Briquette Fuel Complex and surrounding area. The sampling measured periods for air pollutants were from August 11, 2013 to February 21, 2014. Furthermore, we measured and analyzed the seasonal concentrations(summer, autumn and winter). Results: The average concentration for TSP, $PM_{10}$, and $PM_{2.5}$ by direct influence area at Ansim Briquette Fuel Complex were 1.7, 1.4 and 1.9 times higher than reference region. In analysis results of seasonal concentrations for particulate matter in four direct influence and reference area, concentration levels for winter were generally somewhat higher than concentrations for summer and autumn. The average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were $0.0008{\pm}0.0004{\mu}g/Sm^3$, $0.0141{\pm}0.0163{\mu}g/Sm^3$, $0.0248{\pm}0.0059{\mu}g/Sm^3$, $0.0026{\pm}0.0011{\mu}g/Sm^3$, $0.0272{\pm}0.0084{\mu}g/Sm^3$, $0.4855{\pm}0.1862{\mu}g/Sm^3$, and $0.3068{\pm}0.0631{\mu}g/Sm^3$, respectively. In particularly, the average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were 1.9, 3.6, 2.1, 1.9, 1.4, 2.6, and 1.2 times higher than reference area, respectively. The continuous monitoring and management were required for some heavy metals such as Cr and Ni. Moreover, the average concentration in winter for particulate matter in direct influence area at Ansim Briquette Fuel Complex were generally higher than concentrations in summer and autumn. Also, average concentrations for TSP, $PM_{10}$, and $PM_{2.5}$ were from 1.5 to 2.0 times, 1.2 to 1.8 times, and 1.1 to 2.3 times higher than reference area, respectively. In results for seasonal atmospheric environment, TSP, $PM_{10}$, $PM_{2.5}$, and heavy metal concentrations in direct influence area were higher than reference area. Especially, the concentrations in C station were a high level in comparison with other area. Conclusions: In the results, some particulate matters and heavy metals were relatively high concentration, in order to understand the environmental pollution level and health effect in surrounding area at Ansim Briquette Fuel Complex. The concentration of some heavy metals emitted from direct influence area at Ansim Briquette Fuel Complex were relatively higher than reference area. In particular, average concentration for heavy metals in this study were higher than average concentrations in air quality monitoring station for heavy metal for 7 years in Deagu metropolitan region. Especially, the residents near Ansim Briquette Fuel Complex may be exposed to the pollutants(TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals, etc) emitted from the factories in Ansim Briquette Fuel Complex.

• 한국지반환경공학회 논문집
• /
• 제15권6호
• /
• pp.17-29
• /
• 2014

경기도 ${\bigcirc}{\bigcirc}$지역 군 사격장에서 환경으로 유출되는 화약물질 현장저감시설의 설계 자료 확보를 위해 토양오염조사를 실시하였다. 설계에 필요한 자료는 (i) 주 오염 화약물질 종류 파악, (ii) 배출/이동 경로, (iii) 토양 입경별 화약물질 농도조사 및 침강특성이다. 현장 조사 및 분석결과, TNT와 RDX가 사격장 토양에서의 주 오염물질이지만, 군 훈련 종류와 사격장 지형에 따라 오염도는 변화하였다. 화약물질은 표토이외의 심토와 인근 개울에서도 검출되어, 피탄지에서 하천으로의 유출이 있음을 확인하였다. 피탄지에 화약물질 농도가 높은 hot spot이 다수 존재하였으나, 전반적으로 오염농도가 20 mg/kg을 넘지는 않았다. 피탄지 토양 내 점토 함량은 대조군 12 %에 비해 현저히 낮은 5 % 미만이며, 이는 사격으로 인해 식피가 제거되어 강우 시 토사의 표면유출이 증가하였기 때문이라 판단된다. 토양 입경별 화약물질 분포 분석 결과, 토양 입경 0.075 mm 미만의 세립토에는 화약물질 총량의 약 10 % 이하만이 존재하였다. 침강관 실험결과, 유출수 내 액상으로 유출되는 화약물질량이 고상에 있는 화약물질량보다 많았다. 그러므로 사격장에서 표면 유출되는 강수 내 입자상 물질을 간단한 침전지로 처리하고, 다음으로 정화식물을 식재한 인공습지로 액상 내 화약물질을 처리하는 방안이 자립적이며 지속적으로 유지 가능한 녹색 정화방법이 될 것이다.

• 한국조리학회지
• /
• 제22권8호
• /
• pp.149-156
• /
• 2016

본 연구의 목적은 조리과정에서 발생한 총휘발성 유기화합물질, 미세먼지, 악취, 총부유세균 등의 오염물질들이 조리실내로 분산되어 실내공간이나 조리업 종사자에게는 나쁜 냄새나 작업환경 및 건강피해를 감소하고자 하는 것이다. 이를 위해 기존 공기청정기의 단점을 보완하고, 반영구적이며, 각종 오염물질을 효율적으로 제거하기 위하여 활성탄과 황토를 결합한 바이오세라믹 필터를 bar type으로 제작한 실내용 소형 공기청정기 개발에 중점을 두었다. 측정항목은 총휘발성 유기화합물, 미세먼지, 복합악취, 총부유세균 등 모두 4가지 항목으로 개발된 공기청정기 가동 전과 일정시간 가동 후를 비교하여 측정하였다. 측정결과, 총휘발성 유기화합물의 농도는 평균 $2,500{\mu}g/m^3$에서 $223{\mu}g/m^3$으로 약 91.02%의 높은 제거효율을 보였으며, 미세먼지의 제거율은 평균 농도가 $26.68{\mu}g/m^3$로서 97.51%의 우수한 제거효과가 나타났으며, 복합악취의 희석배수를 측정한 결과 평균 144로 평균 95.20% 감소하였다. 또 총부유세균은 초기 농도가 $787{\sim}814CFU/m^3$에서 $47{\sim}40CFU/m^3$로 약 94% 이상 제거되는 것을 확인하였다. 결론적으로 개발되어진 공기청정기의 바이오세라믹 필터는 오염물질을 제거하는데 우수한 제거효과를 나타냈다. 따라서 공기청정기를 조리실내에서 환기장치와 렌지후드를 병행하여 사용하면 기존의 열악한 조리실 내의 환경이 크게 개선되어질 것으로 사료된다.