• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.118-124
• /
• 1998

Dehulled cowpea was microparticulated and coarse fractions and fine fractions were collected by air classification at air classifying wheel speed (ACWS) of 15,000 rpm, 12,000 rpm and 9,000 rpm, respectively. Protein content in fine fraction after air classification was 2 times higher than that of microparticulated cowpea, emulsion capacity was about 3 times than coarse fraction. The coarse fraction of the highest viscosity on the gelatinization properties were detected by amylograph, was C-3 (9,000 rpm coarse)fraction. The majority of microparticulated cowpea particles were oval shaped starch and the rest of them were indeterminate minute particles which had some sharp corners. As an application test, microparticulated cowpea and coarse fraction (C-3) were used for mook (Korea traditional starch jelly) preparation and the wet milled cowpea starch was compared as a control. Some impurities induced discoloring was detected by sensory evaluation but after washing, it made no difference in sensory scores between washed starch and the control cowpea mook. And also syneresis of washed cowpea was less than control. At the above result, it can be to recovery about 85% of cowpea starch using microparticulation/air classification technology.

• Advances in materials Research
• /
• v.12 no.2
• /
• pp.119-131
• /
• 2023

The development of sustainable composites materials, from recycled polymeric materials and waste from the wood industry and stone processing, allows reducing the volume of these by-products, minimizing impacts on health and the environment. Nowadays, Polypropylene (PP) is the most recycled polymer in industry, while the furniture industry has increasingly used timber felled from sustainable forest plantations as a eucalypt. The powder tailing from the ornamental stone extraction and processing industry is commonly disposed of in the environment without previous treatment. Thus, the technological option for the development of composite materials presents itself as a sustainable alternative for processing and manufacturing industries, enabling the development of new materials with special technical features. The results showed that powder granite particles may be incorporated into the polypropylene matrix associated with short eucalyptus fibres forming green hybrid composites with potential application in structural engineering, such as transport and civil construction industries.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.1
• /
• pp.17-21
• /
• 2017

Vanadium slags is a kind of vanadiferous solid waste from steelmaking process. It not only occupies land, pollutes environment, but also leads to waste of resources. Based on the difference of magnetic susceptibility of different particles caused by their chemical and physical properties from vanadium slag, a new technology, superconducting high gradient magnetic separation was investigated for separation and extraction of valuable substances from vanadium slag. The magnetic concentrate was obtained under optimal parameters, i.e., a particle size -200 mesh, a magnetic flux density of 0.8 T, a slurry concentration of 5 g/L, an amount of steel wools of 25 g and a slurry flow velocity of 2 L/min. The content of $Fe_2O_3$ in concentrate could be increased from 39.6% to 55.0% and $V_2O_5$ from 2.5% to 4.0%, respectively. The recovery rate is up to 42.9%, and the vanadium slag has been effectively reused.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.229-234
• /
• 2002

The variation of HAZ toughness with nitrogen content and weld cooling rate was investigated and interpreted in terms of both microstructure and the amount of free nitrogen. The presence of free nitrogen in HAZ was investigated by internal friction measurement and its amount was measured by hydrogen hot extraction analysis. Both nitrogen content and weld cooling rate influenced HAZ microstructure and high toughness was obtained at a mixed microstructure of acicular ferrite, feffite sideplate and polygonal ferrite. If nitrogen content is too low or cooling rate is too fast, bainitic microstructure is obtained and toughness is low. On the other hand, if nitrogen content is too high or cooling rate is too slow, coarse polygonal ferritic microstructure is obtained and toughness is deteriorated again. ill addition to the microstructural change, high nitrogen content also resulted in a large amount of free nitrogen. Therefore, nitrogen content should be kept as low as possible even if the mixed micostructure is obtained. In this experimental condition, the maximum toughness was obtained at 0.006% nitrogen content when weld cooling time ($\Delta$t$_{8}$5/)) is 60s.TEX>5/)) is 60s.

• Journal of Korea Soil Environment Society
• /
• v.2 no.2
• /
• pp.95-103
• /
• 1997

Solvent extraction using aqueous solutions is presumed as one of the most effective methods applicable to in situ conditions without excavation of contaminated soils. Laboratory permeameter soil flushing test is performed to describe the process of solvent extraction of contaminants absorbed on soil particles. When the permeameter tests conducted, diffusion of contaminants through the permeameter flexible-wall was considered for adjusting the remediation percentage. Input and output balance for concentration was well matched in the permeameter tests. Nitrobenzene diffused so excessively (approximately 75%) that it was not suitable for the permeameter desorption tests. No biodegradation was detected in the soil samples.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.3
• /
• pp.361-378
• /
• 1992

The purpose of this investigation was to evaluate the effect of the porous hydroxyapatite particles (Interpore $200^{(R)}$) and guided tissue regeneration membrane ($Gore-Tex^{TM}$ augmentation material) on amount and shape of generating new bone adjacent to implant. Implants were placed immediately after extraction in the bilateral 3rd, 4th premolars of the mandible of the adult dogs. In all experimental groups, artificial bony defects were formed at the buccal cortex area, 3.3mm in width and 3.0mm in depth. In the control group : sutured without HA particles & membranes after placing implants, the experimental group 1 : membrane was place over the artificial bony defect, the experimental group 2 : bony defect was filled with HA particles and covered with membrane. The examination of bone-implant interfaces using light microscope and fluorescent microscope concluded as follows. 1. In all three experimental groups, osseointegration was observed without epithelial migration. 2. In the healing degree of bony defect area, the experimental group 1, 2 showed more prominent healing than control group, and the experimental group 1 showed the most excellent bone formation. 3. In fluorescent microscopic finding, bone remodeling was observed in regenerated bone tissue at defect area of experimental group 1, but in experimental group 2, irregular, discontinuous linear fluorescence was observed at the lower portion of defect area and sign of bone remodeling was weak.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.847-855
• /
• 2014

We developed a highly refractive index planarization layer showing a very smooth surface for organic light-emitting diode (OLED) light extraction, and we successfully prepared a highly efficient white OLED device with an embossed nano-structure and highly refractive index planarization layers. White OLEDs act as an internal out-coupling layer. We used a spin-coating method and two types of $TiO_2$ solutions for a planarization of the embossed nano-structure on a glass substrate. The first $TiO_2$ solution was $TiO_2$ sol, which consists of $TiO_2$ colloidal particles in an acidic aqueous solution and several organic additives. The second solution was an organic and inorganic hybrid solution of $TiO_2$. The surface roughness ($R_a$) and refractive index of the $TiO_2$ planarization films on a flat glass were 0.4 nm and 2.0 at 550 nm, respectively. The J-V characteristics of the OLED including the embossed nano-structure and the $TiO_2$ planarization film were almost the same as those of an OLED with a flat glass, and the luminous efficacy of the aforementioned OLED was enhanced by 34% compared to that of an OLED with a flat glass.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.1
• /
• pp.45-53
• /
• 2006

This study was performed to evaluate the heating characteristics of soils for the application of electrical resistance heating process combined with soil vapor extraction. Laboratory tests were conducted to find out optimum heating conditions by the adjustment of electrical supply and electrode. Results show that fine soil particles are more efficient for electrical heating. As water content of soil increases, more efficient electrical heating is observed. However, as the soil is saturated with water above the soil porosity, decrease in the heating efficiency is observed. The higher the voltage, is and the shorter the distance between the electrodes is, the better the heating efficiency is. The soil contaminated by fuel is also more efficient than non-contaminated soil in electrical resistance heating. From the relationship between the intial electrical current and the conductivity obtained in this study, soil temperature by electrical heating can be estimated.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.17 no.3
• /
• pp.239-252
• /
• 1995

The present study was aimed to evaluate the effect of demineralized freeze-dried bone (DFDB) and resorbable hydroxyapatite (RHA) on bone formation in the extracted socket. The lower left and right 2nd and 3rd premolar were extracted in adult dogs. The one group was grafted with DFDB into the extracted socket, and the other group grafted with RHA. The extracted socket was sutured without any graft materials as control. The animals were killed on the 1st, 2nd, 4th, and 8th week after the graft for macroscopic and microscopic examination. Results obtained were as follows : 1. Macroscopically, nor infection of the graft site and dislodgement of the grafted material were noted in any animals used. 2. Young trabeculae of osteoid were formed in the socket wall in control group at 2 weeks after the graft. Osteoid tissue was formed in DFDB group at 1 week after graft, and a fine osteoid tissue was grown through the RHA particles in RHA group at 2 weeks graft. 3. The grafted groups showed more rapid bone formation than the control. Between the grafted groups, DFDB group showed more rapid formation than RHA group, DFDB group showed osteoinductive bone formation and RHA group showed osteoconductive bone formation. These results suggest that DFDB and RHA are useful to preserve the alveolar bone and to improve new bone formation by immediate grafting into the extraction sockets.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.57-60
• /
• 1971

In this experiment 5 Korean varieties and 3 U.S.A. varieties of wheat were investigated for their moisture content, ash content, crude protein content and extraction rate. The results are summarized as follows; 1. In the case of U.S.A. wheat, the ash content is directly proportional to the content of protein but the extraction rate is negatively correlated to the content of ash. 2. In the case of korean wheat, there is no proportional tendency as in the U.S.A. wheat. It might be cause by the low extraction rate where the endosperm is hardly separated from the bran layer at the same conditions of temering process. 3. The concentration of protein particles in the endospern, is centrifugal in the U.S.A. wheats, but in the Korean varieties the direction is oppositional to the U.S.A. varieties. 4. Yooksung ＃3, Cahngkwang, Youngkwang and Hard winter wheat are adapted to the production of all purpose flour or noodle flour; Noring ＃4, Jinkwang and Softwhite wheat are suitable for the process of cake flour; and Dark northern spring is just adaped to the production of bread flour.