• 수산해양교육연구
• /
• 제28권4호
• /
• pp.1143-1151
• /
• 2016

To study the dispersion process and residence time of anthropogenic pollutant in Masan bay, a three-dimensional hydrodynamic model coupled to a particle tracking model, EFDC, is applied. Particle tracking model simulated the instantaneous release of particles emulating discharge from river and wastewater treatment plant to show the behaviour of pollutant in terms of water circulation and water exchange. Modelled outcomes for water circulation were in good agreement with tidal elevation and current data. The results of particle tracking model show that over half of particles released from northern Masan bay transport to out of area while the particles from Dukdong wastewater treatment plant transport to northern area. This meant pollution source from inside and outside of the northern area can affect water quality of northern Masan bay.

• Composites Research
• /
• 제26권4호
• /
• pp.218-222
• /
• 2013

본 연구에서는 제강 과정의 부산물로 발생하는 슬래그의 구조용 충전제로써의 사용 가능성을 검토하였다. 고분자 기지 슬래그 복합재료를 제작하여 슬래그 입자의 크기(8~12 ${\mu}m$ and 12~16 ${\mu}m$), 체적 비(0-30 vol.%)에 따른 슬래그 복합재료의 기계적 특성에 대한 실험적 연구를 수행하였다. 복합재료 물성에 영향을 주는 요인인 입자 분산 도와 계면상태를 고찰하기 위해 각각 시편에 대하여 조직사진을 촬영하였다. 인장 시험 결과 슬래그 복합재료의 재료강성은 슬래그 체적비가 증가할수록 증가하였고 인장 강도는 체적비가 증가할수록 감소하였다. 슬래그 복합재료의 재료강성은 슬래그 입자의 크기의 변화에 따른 뚜렷한 경향성을 띄지 않았고 인장강도는 입자의 크기가 작을수록 높은 값을 가졌다. 조직 사진 촬영 결과 슬래그 복합재료가 양호한 계면상태를 보였고, 낮은 체적 비에서는 좋은 분산 도를 나타냈지만 체적비가 높아지면 입자들의 뭉침 현상이 발생하는 것을 알 수 있었다.

• Elastomers and Composites
• /
• 제43권4호
• /
• pp.230-240
• /
• 2008

분산중합법에 의해 무기물을 포함하는 고분자 미립자를 합성하기 위해 styrene과 n-butyl methacrylate가 알루미나와 함께 중합되었다. Styrene과 n-butylmethacrylate의 무게 비는 3:1이었고, 입자안정제는 poly(N-vinyl pyrrolidon), 중합 개시제로는 2,2'-azobis(isobutyronitrile)를 사용하여 개시제의 농도, 분산매의 종류, 분산매의 혼합 용해도 상수 (${\delta}_{mix}$), 커플링제의 종류와 농도에 따른 입자경을 조사하였다. 개시제의 농도가 증가함에 따라 입자경이 소폭 상승하였고 분산매의 극성이 증가할수록 입경이 증가하였고, 분산매로서, 이소프로판올과 이온교환수를 조성비에 따라 사용한 경우, $[{\delta}_{mix}]^{-4.01}\;{\propto}$ 평균 입자경과 $[{\delta]_{mix}]^{-0.83}\;{\propto}$ 입경 분포의 관계를 얻을 수 있었다. 커플링제의 종류와 농도변화에 따른 입자경 및 입자경 분포는 뚜렷한 차이가 없었다.

• 한국기계가공학회지
• /
• 제19권2호
• /
• pp.55-62
• /
• 2020

In this study, a PDMS-based low-elasticity magnetorheological elastomer (MRE) was fabricated and the Taguchi method was used to identify the factors affecting the elastic modulus. The mixing entropy was calculated using optical microscopy to confirm particle dispersion, which was referenced in the process establishment. In the MRE process, four parameters, namely the curing agent, particle type, particle fraction, and applied magnetic field, were divided into three levels. The elastic modulus of the specimen was compared at the off-state and at 0.2 T using compression tests, and the obtained signal to noise ratio indicated that the softness and change in the elastic modulus of the MRE was mainly affected by the curing agent and the particle fraction.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.62-68
• /
• 2019

The optoelectronic display units such as TFT-LCD or OLED require many thin optical plastic films and their mass manufacturing processes employ CO2 laser cutting of those thin films in a large quantity. However, laser film cutting could generate fume particles through melt shearing, vaporization, and chemical degradation and those particles could be of great concern for film surface contamination. In order to appreciate the fume particle dispersion behaviors in laser film cutting, this study relies on random particle simulations by probabilistic distributions of particle size, ejection velocity and angles coupled with Basset-Boussinesq-Oseen model of particle trajectory in low Reynolds number flows. Here, up to one million particles of random sampling have been tested to effectively show fume particles dispersed on the film surface. The computational results could show that particular range of fume particle size could easily disperse into the pixel region of processed optical films.

• 한국대기환경학회지
• /
• 제18권2호
• /
• pp.67-83
• /
• 2002

The coupled model (SMART) of dynamic meteorology model and particle dispersion model was developed. The numerical experiment on the relationship between change of land use and diffusion behavior in complex terrain was carried out using this model. It tried to investigate the change of particle diffusion behavior and local weather under the condition in which land-land breeze and sea breeze and mountain breeze intermingled. The numerical experiment results are as follows; 1) The more complicated local circulation field of the interaction of sea breeze, mountain breeze and Land -land breeze is formed. Then, the region circulation in which the urbanization is specific by location of the region is strengthened and is weakened. 2) Though in the region with dominant sea breeze, Land-land breeze does not appear directly, the progress of the sea wind to the inland is affected. 3) In the prediction of the air diffusion, emission high quality and accurate information of the emission site are important. That is to say, the dispersion predicting result which emission high quality and small error of the site perfectly vary for Land - land breeze in the effect may be brought about.

• 한국재료학회지
• /
• 제14권11호
• /
• pp.807-812
• /
• 2004

The uniformity of emission mage and field emission properties of carbon nanotube(CNT) cathodes dependence on CNT particle dispersion were investigated for field emission displays. We used multi-walled carbon nanotubes (MWNTs) synthesized by CVD method as the field emitter materials. CNT dispersion in CNT ink was carried out by ultrasonication and shaking methods. According to CNT dispersion conditions, the uniformity of emission image and field emission properties of CNT cathodes were greatly affected. The smaller particles of filler materials and CNT powders provide the better properties of the CNT cathodes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.44-45
• /
• 2005

Both $Al_2O_3$ and $SiO_2$ nanopowders were ball-milled to break large agglomerates$(500nm\sim10{\mu}m$). To improve the dispersion of ball-milled nanoparticles in transformer oil, surface modification was performed with oleic acid(OA). The modified nanoparticles were examined by the particle size analyzer, electron microscope, Infrared spectroscopy and stability analyser. Particle Size distributions were measured for ball-milled particles, and the results were compared with the size distribution of primary particles. FTIR results indicated that hydrophobicity of modified nanoparticles was due to the chemical reaction between hydroxyl groups of particle surface and oleic acid. The dispersion stability of surface-modified nanoparticles was quite good in transformer oil.

• 한국입자에어로졸학회지
• /
• 제10권1호
• /
• pp.27-31
• /
• 2014

A simple bimodal model has been developed to analyze charged particle coagulation by modifying previously suggested bimdal model for evolution of particle generation and growth. In the present model, two monodisperse modes are used and 40 charge nodes are assigned to each mode to account both change of the particle size and charge distribution. In addition, we also implemented the effect of electrostatic dispersion loss in the present model. Based on the developed model, we analyzed coagulation of asymmetric bipolar charged particles by computing evolutions of particle number concentration, geometric mean diameter of particles, charge asymmetric ratio and geometric standard deviation of particle size distribution for various initial charge asymmetric ratios. The number concentration of asymmetric bipolar charged particles decreases faster than that of neutral particles but that does not give faster growth of particles since the electrostatic dispersion loss overwhelms particle growth by coagulation.

• 한국입자에어로졸학회지
• /
• 제13권4호
• /
• pp.173-182
• /
• 2017

An Eulerian-Lagrangin approach is used to compute particle dispersion from a power plant chimney. For air flow, three-dimensional incompressible filtered Navier-Stokes equations are solved with a subgrid-scale model by integrating the Newton's equation, while the dispersed phase is solved in a Lagrangian framework. The velocity ratios between crossflow and a jet of 0.455 and 0.727 are considered. Flow fields and particle distribution of both cases are evaluated and compared. When the velocity ratio is 0.455, it demonstrates a Kelvin-Helmholtz vortex structure above the chimney caused by the interaction between crossflow and a jet, whereas the other case shows flow structures at the top of the chimney collapsed by fast crossflow. Also, complex wake structures cause different particle distributions behind the chimney. The case with the velocity ratio of 0.727 demonstrates strong particle concentration at the vortical region, whereas the case with the velocity ratio of 0.455 shows more dispersive particle distribution. The simulation result shows similar tendency to the experimental result.