• 한국멀티미디어학회논문지
• /
• 제18권1호
• /
• pp.65-70
• /
• 2015

Particle accelerator has mainly used in nuclear field only because of the large scale of the facility. However, since laser-plasma particle accelerator which has smaller size and spends less cost developed, the availability of this accelerator is expended to various research fields such as industrial and medical. This paper suggests a visualization system to control the laser-plasma particle accelerator efficiently. This system offers real-time 3D images via convert HDF file comes from plasma data obtained from PIC simulation into OpenGL texture type to analyse and modify plasma data. After that, it stores high-resolution rendering images of the data with external renderer hereafter.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.123-131
• /
• 2016

Background: With the increase in the number of particle accelerator facilities under either operation or construction, the accurate calculation using Monte Carlo codes become more important in the shielding design and radiation safety evaluation of accelerator facilities. Materials and Methods: The calculations with different physics models were applied in both of cases: using only physics model and using the mix and match method of MCNPX code. The issued conditions were the interactions of 600 MeV proton and $290MeV{\cdot}n^{-1}$ oxygen with a carbon target. Both of cross-section libraries, JENDL High Energy File 2007 (JENDL/HE-2007) and LA150, were tested in this calculation. In the case of oxygen ion interactions, the calculation results using LAQGSM physics model and JENDL/HE-2007 library were compared with D. Satoh's experimental data. Other Monte Carlo calculations using PHITS and FLUKA codes were also carried out for further benchmarking study. Results and Discussion: It was clearly found that the physics models, especially intra-nuclear cascade model, gave a great effect to determine proton-induced secondary neutron spectrum in MCNPX code. The variety of physics models related to heavy ion interactions did not make big difference on the secondary particle productions. Conclusion: The variations of secondary neutron spectra and particle transports depending on various physics models in MCNPX code were studied and the result of this study can be used for the shielding design and radiation safety evaluation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.151.2-151.2
• /
• 2014

Broadband impedances for the 3-GeV pohang light source-II (PLS-II) storage ring have been numerically estimated using a full three dimensional finite-difference time-domain code, CST particle studio. The total broadband impedance of all the vacuum components was estimated as 0.256 ohm, which is a small fraction of the total machine impedance budget.

• Journal of Radiation Protection and Research
• /
• 제41권3호
• /
• pp.216-221
• /
• 2016

Background: Very fine radiation-induced aerosol particles are produced in intense radiation fields, such as high-intensity accelerator rooms and containment vessels such as those in the Fukushima Daiichi nuclear power plant (FDNPP). Size measurement of the aerosol particles is very important for understanding the behavior of radioactive aerosols released in the FDNPP accident and radiation safety in high-energy accelerators. Materials and Methods: A combined technique using wire screens and imaging plates was developed for size measurement of fine radioactive aerosol particles smaller than 100 nm in diameter. This technique was applied to the radiation field of a proton accelerator room, in which radioactive atoms produced in air during machine operation are incorporated into radiation-induced aerosol particles. The size of $^{11}C$-bearing aerosol particles was analyzed using the wire screen technique in distinction from other positron emitters in combination with a radioactive decay analysis. Results and Discussion: The size distribution for $^{11}C$-bearing aerosol particles was found to be ca. $70{\mu}m$ in geometric mean diameter. The size was similar to that for $^7Be$-bearing particles obtained by a Ge detector measurement, and was slightly larger than the number-based size distribution measured with a scanning mobility particle sizer. Conclusion: The particle size measuring method using wire screens and imaging plates was successfully applied to the fine aerosol particles produced in an intense radiation field of a proton accelerator. This technique is applicable to size measurement of radioactive aerosol particles produced in the intense radiation fields of radiation facilities.

• 한국방사선학회논문지
• /
• 제9권5호
• /
• pp.295-300
• /
• 2015

현재 우리나라는 포항방사광가속기와 국립암센터의 양성자 치료용 가속기와 경주 양성자 가속기가 운영되고 있고 중이온 가속기, 4세대 방사광가속기 등 대형가속기 시설이 건설 중에 있다. 이들 시설에서 고에너지로 가속된 입사입자는 표적물질과 상호작용 후 2차 중성자를 발생시키고, 이 중성자는 가속기 구조물 및 주변 콘크리트, 토양, 지하수 등을 방사화 시킨다. 따라서 이러한 가속기 시설의 안전적 측면을 고려할 때 방사화를 일으키는 중성자의 차폐가 중요하다. 본 연구는 차폐해석에 사용되는 몬테카를로 코드 중 MCNPX를 이용하여 $^{12}C$ beam빔과 표적물질(Cu)과의 상호작용 후 생성되는 중성자를 계산하고, 그 중성자의 철 차폐체와 콘크리트 차폐체의 두께별 투과 후 스펙트럼을 MCNPX의 JENDL/HE 07과 la150을 이용해 비교하여 계산하였다. 빔의 방향과 차폐체의 종류 및 두께에 따라 그 결과를 실험값과 비교하여 검증함으로써 핵자료의 특성을 확인하였으며 향후 대형가속기시설의 선량평가용 기반기술로 활용하고자 하였다.

• Nuclear Engineering and Technology
• /
• 제37권5호
• /
• pp.447-456
• /
• 2005

Laser driven accelerators promise to provide an alternative to conventional accelerator technology. They rely on the excitation of large amplitude density waves in a plasma by the photon pressure of an intense laser. The density oscillations in which electrons and ions are separated, result in extremely large longitudinal electric fields that can be several orders of magnitude larger than those that are used in today's radio-frequency accelerators. Whereas this principle had been demonstrated experimentally for nearly two decades, it was not until 2004 that the production of high quality electron beams around 100 MeV was demonstrated. Analysis, aided by particle-in-cell simulations, as well as experiments with various plasma lengths and densities, indicate that tailoring the length of the accelerator, together with loading of the accelerating structure with beam, are the keys to production of mono-energetic electron beams. Increasing the energy towards a GeV and beyond will require reducing the plasma density and design criteria are discussed for an optimized accelerator module. The current progress and future directions are summarized through comparison with conventional accelerators, highlighting the unique short and long term prospects for intense radiation sources and high energy accelerators based on laser-drivenplasma accelerators.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술대회지
• /
• pp.291-292
• /
• 2004

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.252-254
• /
• 2002

A new protocol for dosimetry in external beam radiotherapy is published by the Japan Society of Medical Physics (JSMP) in 2002. The protocol deals with proton and heavy ion beams as well as photon and electron beams, in accordance with IAEA Technical Report Series No. 398. To establish inter-institutional uniformity in proton beam dosimetry, an intercomparison program was carried out with the new protocol. The absorbed doses are measured with different cylindrical ionization chambers in a water phantom at a position of 30-mm residual range for a proton beam, that had range of 155 mm and a spread out Bragg peak (SOBP) of 60-mm width. As a result, the intercomparison showed that the use of the new protocol would improve the +/- 1.0 % (one standard deviation) and 2.7 % (maximum discrepancy) differences in absorbed doses stated by the participating institutions to +/- 0.3% and 0.9 %, respectively. The new protocol will be adopted by all of the participants.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.67-68
• /
• 2016

The accurate measurement of magnet power supplies (MPS) output currents is essential to delivering stable and repeatable currents to magnets in particle accelerators. An essential element in guaranteeing and evaluating the required performance is the current measurement device and methode. In this paper, we discuss instrument and methods for precision current measurement and performance of the PLS-II MPS.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.91-92
• /
• 2014

본 논문은 고속 Scanning 전자석 전원공급 장치를 제작하여 한국 원자력 의학원에 납품하였고, 전원 장치성능을 확인하였다. 한국 원자력 의학원에서 요구 사양은 전류 기울기가 440 kA/s와 출력 전압 / 전류는 ${\pm}530V$ / ${\pm}80A$이며, 과도상태 이후의 전류 정밀도는 ${\pm}100ppm$ 이하를 만족하는 전원장치 이다. 전류가 고속으로 증가하기 때문에 출력 케이블과 전자석 자체의 표피효과로 인해 구간별 성능에 미진한 부분이 확인되어 추가 연구개발이 요구된다.