• 한국연소학회지
• /
• 제7권2호
• /
• pp.24-33
• /
• 2002

The morphology of deposits on $15-{\mu}m$ thin SiC filaments has been investigated with SEM in a co-flowing, propane/air laminar diffusion flame. The average size of mature soot particles deposited in the luminous flame edge is strongly dependent on their axial position in a typical heavily sooting flame. The surface growth of liquid-phase PAHs molecules and the transition to soots from fully-developed precursors could be observed in the radial deposition of the flame. Two sooting regimes were found: one is the transition from the condensed-phase precursors; the other is the aggregation of smaller soot particles (or chains of them) to be carried along particle path lines. In the high temperature flame edge outside the soot luminous flame surface, the very thin fiber-like structures, which are about 10 nm thick, were found.

• Journal of Magnetics
• /
• 제7권4호
• /
• pp.156-159
• /
• 2002

We have investigated the escape rate of nano-magnetic particle with a magnetic field applied along the easy axis. The model studied here is described by the Hamiltonian H=$K_1\hat{S}{_z^2}$ ＋ $K_2\hat{S}{_y^2}$ ＋ $g{\mu}_bB$ $\hat{S}_x(K_1>K_2>0)$ and the escape rate was calculated with in the semiclassical approximation. We have obtained a diagram for orders of the phase transition depending on the anisotropy constant and the external field. For $K_2$/$K_1>$0.85 the present model reveals the existence of the first order transition within the quantum regime.

• Korea-Australia Rheology Journal
• /
• 제19권1호
• /
• pp.35-42
• /
• 2007

The effects of particle size distribution on the magnetorheological response of inverse ferrofluids was investigated using controlled mixtures of two monodisperse non-magnetisable powders of sizes $4.6\;{\mu}m\;and\;80{\mu}m$ at constant volume fraction of 30%, subjected to large amplitude oscillatory shear flow. In the linear viscoelastic regime (pre-yield region), it was found that the storage and loss moduli were dependent on the particle size as well as the proportion of small particles, with the highest storage modulus occurring for the monodisperse small particles. In the nonlinear regime (post yield region), Fourier analysis was used to compare the behaviour of the $1^{st}\;and\;3^{rd}$ harmonics ($I_{1}\;and\;I_{3}\;respectively$) as well as the fundamental phase angle as functions of the applied strain amplitude. The ratio of $I_{3}/I_{1}$ was found to become more pronounced with decreasing particle size as well as with increasing proportion of small particles in the bidisperse mixtures. Furthermore, the phase angle was able to clearly show the transition from solid-like to viscous behaviour. The results suggested that the nonlinear response of a bidisperse IFF is dependent on particle size as well as the proportion of small particles in the system.

• 한국지반공학회논문집
• /
• 제24권8호
• /
• pp.125-135
• /
• 2008

모래 입자와 연약한 고무 입자로 이루어진 강-연성 혼합재의 응력-변형 및 전단파 특성을 평가하기 위해 고무와 모래의 부피비(sf)와 입자 크기비(sr)를 달리하는 시료를 조성하였다. 벤더 엘리먼트가 설치된 압밀셀을 이용하여 응력-변형시험 및 $K_o$ 상태에서의 미소변형 전단파 시험을 실시하였다. 일정한 입자 크기비를 가지는 강-연성 혼합재는 강성의 입자에서 연성의 입자로 거동이 전이되는 응력-변형 및 미소변형 전단파 특성을 보였다. 또한, $G_{max}=\;{\Lambda}({\sigma}'_{o}/kPa)^{\zeta}$ 관계에서 모래의 부피비(sf)가 $0.4{\sim}0.6$인 구간에서 $\Lambda$계수가 급격히 증가하며 $\zeta$ 지수는 최대값을 보이는 것으로 관찰되었다. 전이 혼합재는 구속응력의 변화에 매우 민감한 거동을 보이며 연성인 고무입자는 재하 하중에 의해 쉽게 변형되므로 최소 간극율을 가지는 강-연성 혼합재의 부피비는 재하된 응력의 크기에 좌우된다. 실내시험을 이용한 본 연구에서는 입자 크기 비와 모래 부피비가 강성 입자와 연성 입자의 혼합재료 거동을 결정하는 것으로 요인으로 분석되었다.

• 대한수학회보
• /
• 제42권4호
• /
• pp.855-867
• /
• 2005

Shattering or disintegration of mass is a well known phenomenon in fragmentation processes first introduced by Kol­mogorov and Filippop and extensively studied by many physicists. Though the mass is conserved in each break-up, the total mass decreases in finite time. We investigate this phenomenon in the n particle system. In this system, shattering can be interpreted such that, in uniformly bounded time on n, order n of mass is located in order o(n) of clusters. It turns out that the tagged particle processes associated with the systems are useful tools to analyze the phenomenon. For the newly defined stochastic shattering based on the above ideas, we derive far sharper conditions of fragmentation kernels which guarantee the occurrence of such a phenomenon than our previous work [9].

• 천문학회보
• /
• 제37권1호
• /
• pp.67.1-67.1
• /
• 2012

Shocks are evolved when the relativistic jets in active galactic nuclei (AGNs), black hole binaries, supernova remnants (SNR) and gamma-ray bursts (GRBs) interact with the surrounding medium. The high energy particles are believed to be accelerated by the diffusive shock acceleration and the strong magnetic field is generated by Weibel instability in the shock. When ultrarelativistic electrons with strong magnetic field cool by the synchrotron emission, the radiation is observed in gamma-ray burst and the near-equipartitioned magnetic field in the external shock delays the afterglow emission. In this paper, we performed the 3D particle-in-cell (PIC) simulations to understand the characteristics of these relativistic shock and particle acceleration. Forward and reverse shocks are shaped while the unmagnetized injecting jet interacts with the unmagnetized ambient medium. Both upstream and downstream become thermalized and the particle accelerations are shown in each transition region of the shock structures.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.126-133
• /
• 2015

Recently, there has been demand for polymeric porous membranes in various fields, such as environmental engineering, pharmaceutics, tissue engineering, drug delivery, biology, and fuel cells. In this study, it is proposed that a polymer particle-based porous membrane can be fabricated using electrospraying and sintering processes. Electrospraying can fabricate polymeric particles with diameters ranging from several micrometers to tens of nanometers without the cumbersome particle aggregation problem. Additionally, the particles can be sintered through thermo-compression under the glass transition temperature. In this study, a polymethyl methacrylate particle-based porous membrane with an average pore size of less than 500 nm is fabricated using the proposed method.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권2호
• /
• pp.39-43
• /
• 2013

$MgB_2$ bulk samples are synthesized through solid state reaction route using Mg precursors with different particle size by keeping the boron precursor unchanged. Scanning electron microscopy study of the fractured surface for all the samples depicts quite distinct structure depending on the Mg precursor. Big size of Mg precursor resulted in to largely elongated and deep pores while smaller one gave roughly ellipsoidal and shallow pore structure. Influence of the Mg particle size on the grain to grain connectivity reflected in the critical current density value which was greater for samples with smaller Mg precursor. All the synthesized samples undergo a superconducting transition at around 36.5 K irrespective of different Mg precursor particle size.

• 한국응용과학기술학회지
• /
• 제20권1호
• /
• pp.27-32
• /
• 2003

The core-shell latex particles were prepared by sequential emulsion polymerization of alkyl methacrylate and styrene(ST) by using an water-soluble initiator(APS) after preparing monomer pre-emulsion in the presence of an anionic surfactant(SDBS). In organic/organic core-shell polymerization, the pre-emulsion method, which minimized required quantity of sulfactant, has been used to increase the conversion rate and the stability of core-shell latex particles as well as to reduce the formation of secondary particle that cause problems of soap-free emulsion during shell polymerization. We used several methods to observe the core-shell structure. The core-shell structure was studied by measuring pH change during hydrolysis by NaOH, glass transition temperature($T_g$) by differential scanning calorimeter(DSC), morphology of latex by transmission electron microscope(TEM) and change of particle size and distribution by a particle analyzer.

• Journal of Korean Society for Atmospheric Environment
• /
• 제15권E호
• /
• pp.65-71
• /
• 1999

The log-normal size distribution theories developed recently for aerosol coagulation are reviewed. The analytical solutiosn to Brownian coagulation developed recently for various particle size regimes are reviewed. In order to describe the evolution of the size distribution of a coagulating aerosol over the entire size range, the analytical solutions developed individually for the free-molecule regime, the transition regime, the nearcontinuum regime, and the continuum regime have been combined. The work described here represents the first analytical solution to the aerosol coagulation problem covering the entire particle size range.