• 한국가스학회지
• /
• 제18권3호
• /
• pp.31-37
• /
• 2014

본 연구에서는 자료 제공을 목적으로 국내 분진폭발사고에서와 동일한 고밀도 폴리에틸렌(high-density polyethylene, HDPE ) 분진을 사용하여 열분해성과 착화에너지를 실험적으로 조사하였다. 폭발 민감도를 측정하기 위하여 시차주사열량계(differential scanning calorimeter, DSC), 열중량분석기(thermo-gravimetric analysis, TGA) 및 최소착화에너지(minimum ignition energy, MIE) 측정장치를 사용하였다. HDPE의 체적기준 평균입경은 $61.6{\mu}m$가 얻어졌으나, 입자 크기에 따른 입자 수밀도(particle number density) 분석에서는 $0.4{\sim}4{\mu}m$의 미세 입자가 98% 이상의 비율을 갖는 것으로 나타났다. TGA 및 DSC 측정결과로부터 HDPE는 $380{\sim}490^{\circ}C$의 온도 구간에서 발화가 일어날 수 있음을 알 수 있었고, MIE는 $1200{\sim}1800g/m^3$의 HDPE의 농도 범위에서 1 mJ 이하로 측정되었는데, 이는 입자 수밀도 기준에 따른 $0.4{\sim}4{\mu}m$의 미세 입자의 비율(98 %)이 매우 높았던 것이 원인으로 판단된다.

• 연구논문집
• /
• 통권28호
• /
• pp.39-47
• /
• 1998

Industrial electrostatic precipitation is a very complex process, which involves multiple-way interaction between the electric field, the fluid flow, and the particulate motion. This paper describes a strongly coupled calculation procedure for the rigorous computation of particle dynamics during electrostatic precipitation. The turbulent gas flow and the particle motion under electrostatic forces are calculated by using the commercial computational fluid dynamics (CFD) package FLUENT linked to a finite-volume solver for the electric field and ion charge. Particle charge is determined from both local electrical conditions and the cell residence time which the particle has experienced through its path. Particle charge density and the particle velocity are averaged in a control volume to use Lagrangian information of the particle motion in calculating the gas and electric fields. The turbulent particulate transport and the effects of particulate space charge on the electrical current flow are investigated. The calculated results for poly-dispersed particles are compared with those for mono-dispersed particles, and significant differences are demonstrated.

• 한국식품영양과학회지
• /
• 제42권3호
• /
• pp.421-426
• /
• 2013

입도분포에 따른 고춧가루의 물리적 특성 변화를 살펴보기 위하여 이완밀도, 압축밀도, 압축시험, 안식각, 비회복성일 및 응력이완 특성을 살펴보았다. 이완밀도는 $0.34{\sim}0.45g/cm^3$ 범위에 있었으며, 다짐밀도는 $0.43{\sim}0.56g/cm^3$ 범위에 있었다. 하우스너 비는 청양품종의 $150{\mu}m$ 이하의 입도에서 1.531로 가장 높은 값을 나타내었으며, 응집성도 크게 나타났다. 압축성과 압축비는 각각 0.001351~0.004383 및 1.0062~1.0265 범위의 값을 나타내었고, 입도별 비회복성일은 69.16~90.24% 범위를 나타내었다. $k_2$ 값과 이완성은 청양품종 $425{\sim}300{\mu}m$ 입도에서 각각 1.74 및 44.92%로 가장 높았다. 안식각은 $32.84{\sim}49.84^{\circ}$ 범위를 나타내었다. $425{\sim}300{\mu}m$ 입도를 기준으로 입도가 작아지거나 커짐에 따라 물리적 특성 값이 변화하였다. $150{\mu}m$ 이하의 입도에서는 결착성과 다짐성 그리고 변형의 정도가 크게 나타났다. 따라서 작은 입도의 고춧가루를 수송, 저장할 때보다 각별한 주의가 필요할 것으로 판단된다.

• 한국해양공학회지
• /
• 제32권4호
• /
• pp.261-271
• /
• 2018

In this study, a hydraulic model test, to which Particle Image Velocimetry (PIV) system applied, was used to determine the hydrodynamic characteristics of the advection-diffusion of saltwater according to bottom conditions (impermeable/permeability, diameter, and inclination) and the difference of the initial salt. Considering quantitative and qualitative results from the experiment, the characteristics of the density current were discussed. As an experimental result, the advection-diffusion mechanism of salinity was examined by the shape of saltwater wedge and the flow structure of density currents with various bottom conditions. The vertical salt concentration obtained from the experiment was used as quantitative data to calculate the diffusion coefficient that was used in the numerical model of the advection-diffusion of saltwater.

• Nutrition Research and Practice
• /
• 제6권2호
• /
• pp.120-125
• /
• 2012

The aim of this study was to investigate the influencing factors that characterize low density lipoprotein (LDL) phenotype and the levels of LDL particle size in healthy Korean women. In 57 healthy Korean women (mean age, $57.4{\pm}13.1$ yrs), anthropometric and biochemical parameters such as lipid profiles and LDL particle size were measured. Dietary intake was estimated by a developed semi-quantitative food frequency questionnaire. The study subjects were divided into two groups: LDL phenotype A (mean size: $269.7{\AA}$, n = 44) and LDL phenotype B (mean size: $248.2{\AA}$, n = 13). Basic characteristics were not significantly different between the two groups. The phenotype B group had a higher body mass index, higher serum levels of triglyceride, total-cholesterol, LDL-cholesterol, apolipoprotein (apo)B, and apoCIII but lower levels of high density lipoprotein (HDL)-cholesterol and LDL particle size than those of the phenotype A group. LDL particle size was negatively correlated with serum levels of triglyceride (r = -0.732, $P$ < 0.001), total-cholesterol, apoB, and apoCIII, as well as carbohydrate intake (%En) and positively correlated with serum levels of HDL-cholesterol and ApoA1 and fat intake (%En). A stepwise multiple linear regression analysis revealed that carbohydrate intake (%En) and serum triglyceride levels were the primary factors influencing LDL particle size ($P$ < 0.001, $R^2$ = 0.577). This result confirmed that LDL particle size was closely correlated with circulating triglycerides and demonstrated that particle size is significantly associated with dietary carbohydrate in Korean women.

• 대한환경공학회지
• /
• 제28권2호
• /
• pp.216-222
• /
• 2006

본 연구에서는 국내에서 개발되어진 섬유사 필터의 충진밀도와 여과속도가 처리 효율에 미치는 영향에 대한 연구결과를 나타내었다. 0.93 mm의 직경을 가진 폴리아마이드 섬유사가 충진된 직경 40 cm, 높이 2 m의 pilot-scale 규모의 반응기에서 수행되었다. 충진밀도가 섬유사 여과기의 처리효율에 미치는 영향을 살펴보기 위해 여과속도를 325 m/hr로 고정하고 충진밀도를 $70kg/m^3$에서 $100kg/m^3$의 범위에서 운전하였으며, 이와 반대로 여과 속도가 섬유사 여과기의 처리효율에 미치는 영향을 연구하기 위해서 충진밀도를 $70kg/m^3$으로 고정시킨 뒤 여과속도를 65 m/hr에서 400 m/hr의 범위로 운전하였다. 충진밀도가 증가할수록 여과 압력은 기하급수적으로 증가하였다. 탁도 및 SS 제거효율은 $80kg/m^3$까지는 30% 이내의 낮은 제거효율을 나타내었으며, $100kg/m^3$에서도 50% 이하의 낮은 제거효율을 나타내었다. 여과속도에 따른 섬유사 여과기의 여과압력은 여과 속도와 비례적으로 증가하였다. 여과속도가 낮을수록 탁도와 SS의 제거효율도 증가하였으며 65 m/hr에서 73%의 제거 효율을 나타내었다. 전체적으로, 섬유사 여과기를 이용한 입자상 물질의 제거 효율을 개선하기 위해서는 충진 밀도 보다 여과속도를 유입수 특성에 따라 적절히 조절하는 것이 효과적인 것으로 나타났다.

• 설비공학논문집
• /
• 제2권2호
• /
• pp.119-126
• /
• 1990

In this study, the overall heat transfer coefficients are calculated on fluidized bed double pipe heat exchanger and single phase double pipe heat exchanger at the same condition. The effect of the particle size, its material, fluidizing velocity and static bed height on overall heat transfer coefficient has been investigated. The main conclusions obtained from the experiment are as follows. 1. The overall heat transfer coefficient of the fluidized bed heat exchanger is higher than that of single phase forced convective heat exchanger (maximum 2.3 times) 2. The value of the overall heat transfer coefficient increase with an increase in static bed height and decrease with an increase in particle size. 3. For the same particle size, the particle of low density can obtain higher overall heat transfer coefficient than that of high density.

• 한국식품과학회지
• /
• 제11권2호
• /
• pp.81-85
• /
• 1979

1. Gram Quality Analyzer로 측정한 단백질과 Kjeldahi치와는 곡종에 관계없이 고도의 상관(상관계수 $0.97{\sim}0.98$)을 나타내었으며 반복 측정시 의미있는 차이를 보이지 않았다. 2. 밀의 경우 경연질별로 큰 차이가 없었으나 보리의 경우 겉보리가 쌀보리보다 상관계수가 약간 낮았고 반복간 오차도 컸다. 3. 측정시료의 입자크기는 단백질 측정치에 직접 영향은 없었으나 입자크기가 작을수록 측정오차가 작았다. 4. 측정 cell에 충진하는 시료는 12 g 정도가 적합하였으며 시료를 많이 넣는 경우 적외선 reflectance가 많아 단백질 측정치는 다소 증가하였으며, 8 g 이하로 넣는 경우 오차가 컸다.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.638-644
• /
• 2000

The sintering behaviors of the glass-alumina composites for low firing temperature were investigated as functiions of the volume fraction of alumina powder and the particle size with respect to porosity and pore shape. As the volume fraction of alumina powder was increased or the particle size of it was decreased, the sintering temperature of open pore-closing was raised. When the volume fractions of alumina which had 2.19$\mu\textrm{m}$ median diameter were increased with 20, 30, 40, and 50%, the sintering temperatures of open pore-closing were 425, 450, 475, and 500$^{\circ}C$. And when the median particle size of alumina was diminished from 2.19$\mu\textrm{m}$ to 0.38$\mu\textrm{m}$, the sintering temperature of open pore-closing was increased from 450$^{\circ}C$ to 475$^{\circ}C$. Especially, the sintering temperature, which showed maximum density, was corresponded with the stage of open pore-closing and after achieving maximum density over heating resulted in dedensification of specimen, so called, over-firing behavior.

• Journal of Mechanical Science and Technology
• /
• 제20권8호
• /
• pp.1266-1274
• /
• 2006

A numerical study is performed to investigate the effect of inner surface roughness and micro-particles on adiabatic single phase frictional pressure drop in a perfect square micro channel. With the variation of particles sizes (0.1 to $1{\mu}m$) and occupied volume ratio (0.01 to 10%) by particles, the Eulerian multi-phase model is applied to a $100{\mu}m$ hydraulic diameter perfect square micro channel in laminar flow region. Frictional pressure loss is affected significantly by particle size than occupied volume ratio by particles. The particle properties like density and coefficient of restitution are investigated with various particle materials and the density of particle is found as an influential factor. Roughness effect on pressure drop in the micro channel is investigated with the consideration of roughness height, pitch, and distribution. Additionally, the combination effect by particles and surface roughness are simulated. The pressure loss in microchannel with 2.5% relative roughness surface can be increased more than 20% by the addition of $0.5{\mu}m$ diameter particles.