천리안위성(2010년 발사)의 성공적인 개발을 바탕으로 두 기의 위성을 동시에 개발하는 정지궤도 복합위성(GEO-KOMPSAT-2) 프로그램이 진행 중이다. 정지궤도 복합위성 중 GEO-KOMPSAT-2A(GK2A)위성에는 차세대 고성능 기상 탑재체와 우주기상 탑재체가 개발 탑재될 예정이다. 국내 주도로 개발되는 우주기상 탑재체는 대한민국 최초의 정지궤도용 우주기상 센서가 될 예정이다. 세 가지 종류의 우주기상 탑재체(고에너지 입자 검출기, 자력계, 위성 대전 감시기)는 정지궤도에서 우주공간에 대한 물리적 현상(고에너지 입자 분포, 지구 주위의 자기장, 위성 대전 전류)을 관측하여 우주기상 예 경보에 활용될 목적을 가지고 있다. 본 논문에서는 GK2A위성의 부탑재체인 우주기상탑재체 개발 요구사항, 시스템 설계 및 접속 설계에 대해 요약 기술하였다.
고품질의 현탁중합토너를 제조하기 위해서는 수상 현탁계의 최적화가 매우 중요하다. 따라서 본 연구에서는 무기현탁제로 사용한 수산화칼슘($CaOH_2$)/인산($H_3PO_4$)(Ca/P)의 몰비 및 수상의 pH가 스타이렌 기반 현탁중합토너의 특성에 미치는 영향을 중점적으로 조사하였다. 먼저 수상을 중성조건(pH=7.5)으로 고정하고 Ca/P의 몰비를 1.5:1부터 1.76:1까지 변화시켰다. 그 결과 Ca/P의 몰비를 1.73:1로 하였을 때 이상적인 인산칼슘염(하이드록시아파타이트)이 만들어졌으며 이 조건에서 제조된 중합토너는 입도분포, 원형화도 및 대전특성이 우수하였다. 이 결과를 바탕으로 Ca/P의 몰비를 1.73:1로 고정하고 수상을 약산성(pH=5.5) 및 약염기성(pH=9.5) 조건으로 변화시켰다. 그 결과 약산성 조건에서 제조된 중합토너는 더욱 더 우수한 입도분포, 원형화도 및 대전특성을 나타냈으며 인쇄품질도 매우 우수하였다. Ca/P의 몰비와 수상의 pH 조건을 최적화하여 고품질의 현탁중합토너를 제조할 수 있었다.
본 연구에서는 순환방식의 1000 CMH급 전기집진장치 성능평가 시스템 구축하여, 대용량 순산소 연소 장치 없이 순산소 연소가스 모사 조건(고농도 $CO_2$ 조건)에서 엣지-평판형 전기집진장치를 방전극 형상, 집진판 간격, 유입속도, 가스조성 및 분진 입경에 따라 성능을 평가하였다. $CO_2$ 70% 조건에서 3 종 방전극에 대해 성능 비교를 한 결과, 방전극 편 면적이 넓은 방전극이 상대적으로 높은 포집효율을 나타내었다. 또한 유입속도가 감소할수록, 분진 입경이 증가할수록, 집진판 간격이 좁을수록 분진 집진 효율이 증가하였으나, $CO_2$ 농도가 증가할수록 효율이 감소하였다. 그러므로 $CO_2$ 농도가 높을 것으로 예상되는 순산소 연소 등 배기가스 조건에 적용되는 전기집진장치를 설계할 경우, 기존과 동일한 단위 가스 체적 당 코로나 전력 조건에서 집진장치 내부 유속을 줄이거나 집진판 간격을 좁히는 설계변화가 요구되며, 방전극의 경우 방전편 면적이 넓으면서 코로나 전류가 높은 방전극이 적용되야 할 것으로 판단된다.
본 연구는 MBT시스템과 연계된 호기성안정화장치에서 입경 크기가 안정화에 미치는 영향을 검토하기 위하여 실시되었다. 반응기내 생분해성 폐기물(음식물류 폐기물 60%, 종이류 폐기물 25%, 목재류 폐기물 2% 및 퇴비 5%)을 동일한 조성으로 충전하고, 각각의 입경을 5 mm, 10 mm, 20 mm, 50 mm, 100 mm 및 미선별 등으로 조절하여 충전한 후에 안정화 정도를 비교분석하였다. 실험결과 온도변화에서는 50 mm 이하의 입경에서 최고 온도가 $65^{\circ}C$ 이상을 보였으며, 100 mm와 미선별 반응기에서는 최고온도가 약 $50^{\circ}C$를 보였다. $CO_2$ 가스의 발생량은 입경의 크기에 따라 발생량이 비례하는 현상이 관찰되지 않고, 오히려 100 mm 이상에서 높은 발생량을 보였다. 반응과정중 습윤 및 건윤기준의 무게변화는 입경 크기가 가장 작은 5 mm에서 각각 30% 및 46%의 감소율을 보였으며, 입경이 클수록 감소율이 낮아지는 경향을 보였다. 물용출 $COD_{Cr}$ 및 TOC는 입경 크기가 50 mm 이하인 반응기에서는 반응초기 대비 감소율이 약 80%로 나타난 반면 입경이 100 mm 및 미선별 반응기에서는 약 60%의 감소율을 나타내었다. 이러한 결과로부터 생분해성 폐기물의 입경이 작을수록 유기물의 분해율이 높아져 생분해성 물질의 분해 안정화가 촉진되는 것으로 나타났으며, 가능한 50 mm 이하로 입경을 조절하여 반응시키는 것이 필요한 것으로 나타났다.
전자빔 증착기를 이용하여 1000 $\AA$의 두께를 가진 MgO박막을 구리 기판위에 상온에서 증착하였다. 스퍼터링수율 측정시 MgO 층에 충전현상을 없애주기 위해서 1000 $\AA$ 두께의 Al을 증착하였다. 갈륨 액체금속을 집속이온빔 이온원으로 사용하였다. 두 개의 정전렌즈를 사용하여 이온빔을 집속하였고, MgO에 이온빔을 주사하기 위해 편향기를 사용하였다. 가속전압의 변화에 따라 시료대 전류와 이차입자 전류를 측정하였고, 이 전류값은 소스에 인가하는 가속전압에 따라 변화되었다 MgO 박막의 스퍼터링 수율은 분석된 시료대 전류, 이차입자 전류 및 순수빔 전류의 값을 사용하여 결정하였다. 집속이온빔 장치의 가속전압이 15 kV일 때 MgO 박막의 스퍼터링 수율은 0.30으로 나왔고 가속전압의 값이 증가할 때 스퍼터링 수율이 선형적으로 증가하였다. 이러한 결과를 볼 때 집속이온빔 장치를 이용하면 MgO 박막의 스퍼터링 수율을 측정할 패 매우 효과적임을 알 수 있다.
반도체 공정에서 배출되는 미세입자를 포집하기 위하여 전기집진장치가 적용되고 있으나, 배출가스 내 포함된 강부식성 오염원에 의한 전기집진장치 내부 오염 및 부식 문제가 심각하여, 이를 해결하기 위한 방안이 절실하다. 본 연구에서는 탄소섬유로 이루어진 하전부와 PET 필름 사이에 금속 박막이 삽입된 집진부로 이루어진 내부식 전기집진장치를 개발하여, 하전부 및 집진부 인가전압, 처리유량, 하전부 채널 수 등의 운전 조건에 따른 전기집진기의 초미세입자 집진 성능을 평가하였다. 평균입경이 100 nm인 KCl 입자를 시험입자로 사용하였으며, 전기집진기 전/후단 입자 농도 변화를 측정하기 위하여 SMPS를 사용하였다. 본 연구에서 개발된 9채널 하전부와 65 mm 집진부로 구성된 전기집진기의 성능평가 결과, $500\;m^3/hr$ 유량조건에서 하전부 및 집진부에 7 kV와 10 kV를 각각 인가하였을 때, 300 nm입자에 대한 포집효율이 90% 이상으로 높게 나타났다.
This research is to determine the level of environmental pollution at a blasting construction area which is the origin of noise, vibration, and suspended particle, and to compare the results with other domestic and international standard data. This experiment is also to find out the effects resulting from blasting construction and to propose a plan that can decrease environmental pollution. The blasting construction area is a factory site which is about one and half million square meter and sewage disposal plant is about ninety thousand square meter. Both were selected as the areas for the tests to be conducted in determination test. The test to determine the level of noise, vibration, and total suspended particle was conducted thirty times around the blasting construction area by comparing measurement results and numerical analysis. However, as the test was not conducted in the laboratory but in the actual blasting construction area, it was not possible to do the test with the same exact conditions each true. Therefore, the test was not ideal as conditions could change from test to test. For the most part, the level of noise was below the standard level of 70dB. Every vibration test was under the standard limitation. For example, a house, 200m away was tested for noise and vibration and the level was found to be under the 0.2 cm/sec which is the standard for specialty designed cultural sites., i.e very low level. Also a buried oil pipeline that was 30m away also marked under 2.0cm/sec which is the norm for an industrial area. However, if there were an oil pipeline under the house, the amount of charging gunpowder per hole should be decreased compared to the amount used in the test. The test result for suspended particles under the standard limitation which is 24hour average 300$\mu\textrm{g}$/㎥ at a distance from blasting wavelength, but at detonator, total suspended particle from the blast origin exceeded the standard limitation. If explosion occurs when it detonates in the hole, most of the energy would be absorbed in the crushing of rocks, but some remaining energy would make noises and vibration inevitable. So the important thing is how to minimize the environmental pollution from the blasting. There should be regulations in order that the standard limitation is not exceeded, and to decrease the environmental pollution from the blasting.
전기자동차용 배터리 하우징 소재로 사용되고 있는 금속 소재에서 경량소재로 대체하기 위한 열가소성복합재료를 제조하였다. 매트릭스 소재는 고분자 소재인 나일론 6를 사용 하였으며 방열 성능을 부여하기 위해 열전도도가 높은 Boron Nitrate(BN)를 사용하였다. 동일한 필러의 함량 및 입자 크기에 따른 열전도성 고분자 복합재료의 방열 특성을 분석하였다. 필러의 함량이 증가할수록 열전도도 값이 증가하였으며, 입자크기가 60~70㎛인 BN의 함량이 50%인 복합재료의 경우 1.4W/mK 이상 열전도도를 나타내었다. 입자 크기가 클수록 입자 간 계면 접촉면이 넓어져 Thermal path가 이루어짐을 확인하였다. 제조된 열전도성 고분자복합재료를 이용하여 배터리 하우징을 제작하였으며 셀의 충방전 동안 온도 변화를 관찰하여 배터리 하우징의 대체 소재로서의 가능성을 확인하였다.
KIRAMS-13, the first medical cyclotron developed by domestic technique, is used to produce radio-isotope such as $^{18}F$ whose life time is relatively short through test operation. For high-power operation of charged particle accelerators, the power coupler must withstand enormous stresses due to charging induced by high RF power passing through. High-power RF testing with peak power in excess of 30kW has been performed on prototype power coupler for KIRAMS-13 normal conducting cavities. CST MICROWAVE STUDIO(CST MWS) is used for fundamental RF Design, and power coupler is manufactured according to fundamental power coupler design requisite. The qualification of the couplers has occurred for the time being only in a limited set of conditions as the available RF system and control instrumentation are under improvement.
An investigation was conducted to determine whether the ratio of the fluid to the charged particles affects the panel reflexibility rate and the drifting current flowing in the panel, in electrophoretic-based electronic paper. In this regard, three panels were produced in this study with the ratio of the charged particles to the fluid set as 1:5, 1:1, and 5:1. Each sample was driven using an identical input pulse, for which the current flowing in the panel and the output voltage of the photodiode were measured for the panel reflexibility rate. Consequently, the drifting current initially exhibited a peak value and a saturated value at a later point. This value was proportional to the ratio of the charged particles, and it was similar to this ratio when it is higher than 1:1. The output voltage of the photodiode due to the panel reflexibility rate was proportional to the ratio of the charged particles. However, the response speed decreased if the ratio was higher than 1:1. It is expected that the results of this study will contribute to the analysis of the charging of charged particles in electrophoretic-based electronic paper, and the selection of an appropriate concentration.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.