• 한국세라믹학회지
• /
• 제22권4호
• /
• pp.40-46
• /
• 1985

Thermal diffusivities of zirconia samples partially or fully stabilized by MgO and $Y_2O_3$ were measured b laser-flash method up to 140$0^{\circ}C$ The values of thermal diffusivity decreased as the contents of MgO and $Y_2O_3$ increased due to the phonon scattering effect of defect structure of cubic phase formed. The temperature dependence of thermal diffusivity showed that the thermal diffusivity values decreased due to phono-phonon scattering as the temperature increased. The difference in thermal diffusivity was observed on cooling after heating up to 140$0^{\circ}C$ for magnesia stabi-lized zirconia samples but not for yttria stabilized zirconia samples.

• 한국세라믹학회지
• /
• 제31권6호
• /
• pp.651-659
• /
• 1994

BaTiO3 ceramics were sintered on Al2O3, MgAl2O4, MgO and Mg-, Ca-, Y-stabilized zirconia setters. Then the influence of setters on the microstructure of BaTiO3 ceramics and the stability of setters were investigated by SEM, EDAX and XRD analyses. The microstructure of BaTiO3 ceramics sintered on Al2O3, MgAl2O4, MgO and Mg-PSZ showed large grain growth, but little grain growth on Ce-TZP(Tetragonal Zirconia Policrystal). Mg-PSZ(Partially Stabilized Zirconia), Ca-PSZ, Ce-TZP setters showed extensive phase transformation. Y-TZP and fused Y-SZ (Stabilized Zirconia) setters were stable. The liquid sintering aids of BaTiO3 ceramics accelerate mass transport. The reaction of SrTiO3 in BaTiO3 with ZrO2 resulted in the formation of SrZrO3.

• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.289-296
• /
• 1991

Hydroxyapatite (HAp)-zirconia bioceramics, which have excellent biocompatibility with tissue of bone and tooth and good mechanical properties, were synthesized, and their properties and biocompatibility were investigated. HAp powders were synthesized with Ca/P=1.67 and pH 11 by precipitation method. A fine spherical monodispersed ZrO2 powders were prepared by metal alkoxide method, and then they were partially stabilized with 10 mol% CaO by solid state reaction at 1300℃. HAp-zirconia composites were prepared by sintering of these HAp mixed with various amount CaO-partially stabillized zirconia (PSZ). When HAp containing 15 wt% PSZ with 10 mol% CaO (PSZ(10C)) were sintered at 1250℃, it was prevented to decompose into TCP and ZrO2 was uniformly dispersed at HAp matrix. Mechanical strength of these sintered bodies were increased by addition of 15 wt% PSZ(10C), the bending strength of compacts fired at 1250℃ was 165 MPa. HAp-PSZ composites chemically bonded each other in Ringer's solution and the component of bonded layer was HAp. These composites did not prevent cell-growing and exhibit any cytotoxic effects.

• 센서학회지
• /
• 제18권6호
• /
• pp.441-448
• /
• 2009

Magnesia partially stabilized zirconia(Mg-PSZ) solid electrolytes for an improvement of thermal shock resistance, which is suitable for the measurement of oxygen activity in a molten steel, were prepared by post-thermal aging treatment. The steelmaking oxygen sensor elements were formed by an injection molding method, sintered at $1650^{\circ}C$, and then thermal aged ranged from 1250 to $1400^{\circ}C$. Sintered density and porosity were decreased as increasing the magnesia content in a zirconia-magnesia solid solution. Fractions of cubic phase to the synthesized Mg-PSZ solid electrolytes were ranged from 13.13 to 79.54.% after post-thermal aging treatment. Very dense microstructure without voids in the grains was obtained by the post-thermal aging process. Fine tetragonal phase crystallites precipitated on the cubic surface during post-thermal aging up to $1300^{\circ}C$ improve a thermal shock resistance and reappearance of electro motive force(EMF) curve.

• 대한기계학회논문집A
• /
• 제40권3호
• /
• pp.267-273
• /
• 2016

본 연구에서는 부분 안정화 지르코니아(Z)와 자기치유능력을 부여하기 위하여 SiC와 $TiO_2$를 첨가한 5종류의 복합 지르코니아(ZS, ZST1, ZST2, ZST3, ZST5)를 소결하여, 기계적 특성과 열처리에 의한 균열 치유 가능성을 평가하였다. 6종류 지르코니아 세라믹스의 비커스 경도는 큰 차이가 없으며, 부분 안정화 지르코니아에 SiC 첨가(ZS)는 급격한 굽힘강도의 저하가 나타났지만, $TiO_2$의 첨가(ZST1, ZST2, ZST3, ZST5)는 강도가 향상하였다. 이는 SiC 및 $TiO_2$의 첨가의 따른 결정화의 영향이라 판단된다. 최고 굽힘 강도를 나타내는 균열 치유 조건에서 지르코니아 단상체는 비커스 균열이 남았으나, SiC가 첨가된 4종류는 비커스 균열이 관찰되지 않아 균열이 치유되었다.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.90-95
• /
• 2005

The wire-arc process is a low-cost thermal spray method simply utilizes electrical energy to melt the feedstock wire. It is more userful for field applications, especially to coat large surface area. In this paper, a special Fe-based alloy coatings by using the wire-arc process were developed. Nanoscale composite coatings were achieved either during spraying or through a post heat treatment. As-sprayed Fe-based alloy coatings had been an amorphous matrix structure, after heating to $700^{\circ}C$ for 10 minutes a solid state transformation occurred in the some fraction of amorphous matrix which resulted in the formation of nanostructured recrystallized phase. Scanning electron microscopy (SEM) and field emotional scanning electron microscope(FE-SEM) were applied to analyze the microstructure of the coatings. Additionally hardness and bend resistance of the Fe-based alloy coatings were examined, and these results were compared with those of partially stabilized zirconia(PSZ) coatings by using the plasma spray process.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1991년도 특별강연 및 추계학술발표 개요집
• /
• pp.64-65
• /
• 1991

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.7-8
• /
• 2000

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 추계학술발표회 초록집
• /
• pp.28-29
• /
• 2000

• 대한화학회지
• /
• 제44권6호
• /
• pp.592-599
• /
• 2000

여러 가지 온도, 조성 및 농도에서 이성분계 세라믹 복합체 TPSZ(titania partially-stabilized zirconia)의 미분말을 초음파분무열분해법에 의하여 합성하였으며, 합성공정인자가 분체특성에 미치는 영향을 검토하고, 합성된 분체의 특성을 조사하였다. 출발용액의 제조는 금속염의 농도가 0.025~0.1 M이 되도록 증류수에 용해하고, 그 조성비는 $ZrO_2$ 90~97.5 wt%에 $TiO_2$ 2.5~10 wt%가 되도록 하였다. 합성시 열분해 영역에서의 온도는 건조부가 400~550$^{\circ}C$, 반응부는 800~1100$^{\circ}C$로 하였으며, 합성된 분체는 습식으로 포집하여 110$^{\circ}C$에서 3시간 동안 건조하였다. 합성된 미분체의 특성을 Raman Spectroscopy, X-ray diffraction(XRD), Scanning Electron Microscopy(SEM), Transmission Electron Microscopy (TEM) 및 Particle Size Analyzer(PSA)로써 조사하였고, Inductively Coupled Plasma-Atomic Emission Spectroscopy(ICP-AES)로써 순도 및 조성을 분석하였다.