• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.160-175
• /
• 1984

This study was carried out to analyze the effects of the revolution and forwarding speed of the rotary blade and the edge curves which were $30^{\circ}$ and $40^{\circ}$, on the power requirement of rotary tillage. In this study, the revolutions of the rotary blade considered were 204, 243, 285, 360 rpm, and the forwarding speeds of the rotary system considered were 29.40cm/sec, 46.93em/sec. The power requirements of rotary blade were measured by a dynamic strain gage systems at the soil bin which was filled with artificial soil. The results of the study were summarized as follows: 1. The response surface analysis showed that the revolution and forwarding speed of the rotary shaft had an interacting influence on the torque requirement of the rotary blade. The mathematical model developed by the above was repersented as follow. $$T=a_0+a_1V+a_2R +a_3VR+a_4VR^2$$ where, $a_0=constant$ $a_1,\;a_2,\;a_3,\;a_4=coefficients$ V=forwarding speed of the rotary system. (em/sec) R=revolution of the rotary shaft. (rpm) T=tilling torque requirement. (kg-m) 2. When the maximum tilling torque requirement was analyzed, ${\partial}T/{\partial}R$ was decreased with the increasing revolution of rotary shaft, while ${\partial}T/{\partial}V$ was increased, which was minimum at 200~220 rpm. When the forwarding speeds were increased, ${\partial}T/{\partial}R$ was decreased with increasing rate. 3. When the mean tilling torque requirement was analyzed, ${\partial}T/{\partial}V$ was constant at 320~360 rpm and ${\partial}T/{\partial}R$ was decreased with increasing rate along with the increasing revolution of rotary shaft. 4. When the mean tilling torgue requirement per unit volume of soil was analyzed, ${\partial}T/{\partial}V$ was minimum at 270~300 rpm. ${\partial}T/{\partial}R$ for the forwarding speeds of 29.40cm/sec and 46.93cm/sec was same as that for 280~290 rpm. 5. Increasing the edge curves of the rotary blades, the tilling torque requirement was increased. But other studies showed that the smaller the edge curve, the more straw could be wrapped on blades which resulted in increasing torque requirements. Therefore, the edge curve of rotary blade should be considered for the future study.

• Korean Journal of Organic Agriculture
• /
• v.26 no.1
• /
• pp.99-128
• /
• 2018

The cultivation area of rice as staple grains is decreasing in the domestic situation in Korea. Import volume of a duty in foreign rice is 409,000 tons for a year regardless increasing of production per unit area and decreasing of rice consumption. The total stock of rice is increasing cumulatively despite the effort for production mediation of rice. Therefore, maintenance of cultivation area and reduction of production are necessary for national foodstuffs security problems. Development of environment-friendly and low-carbon technology as alternative of global warming and aging of farm labor power is very important responsibility for descendants with creation of sustainable agriculture environment. As alternative for demand and supply stabilization of rice from all angles, first stage: extension of environment-friendly cultivation area as 17% Jeollanam-do level with maintenance of cultivation area under the present circumstances, second stage: extension of environment-friendly cultivation area as 25%, third stage: extension of environment-friendly cultivation area as 35%. From above mentioned scenario, reduction of rice production (60,000 tons), increases of production cost (59,200,000,000 Won), and reduction of income (201,500,000,000 Won) are estimated in first stage. Reduction of rice production (90,000 tons), increases of production cost (122,100,000,000 Won), and reduction of income (313,700,000,000 Won) are estimated in second stage. Reduction of rice production (380,000 tons), increases of production cost (222,000,000,000 Won), and reduction of income (464,500,000,000 Won) are estimated in third stage. From analysis results for partial tillage in transplanting cultivation complex (10ha), rice production is decreased 1.3~1.5 ton by complex. Production cost of rice is decreased and increases of income cultivation type. Gradual extension of environment-friendly agriculture and low-carbon partial tillage could be expected for environment maintenance of the territorial integrity, confidence of consumer, and high-efficiency of low-cost.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.4
• /
• pp.108-114
• /
• 1980

A deterministic conceptual erosion model which simulates detachment, entrainment, transport and deposition of eroded soil particles by rainfall impact and flowing water is presented. Both upland and channel phases of sediment yield are incorporated into the erosion model. The algorithms for the soil erosion and sedimentation processes including land and crop management effects are taken from the literature and then solved using a digital computer. The erosion model is used in conjunction with the modified Kentucky Watershed Model which simulates the hydrologic characteristics from watershed data. The two models are linked together by using the appropriate computer code. Calibrations for both the watershed and erosion model parameters are made by comparing the simulated results with actual field measurements in the Four Mile Creek watershed near Traer, Iowa using 1976 and 1977 water year data. Two water years, 1970 and 1978 are used as test years for model verification. There is good agreement between the mean daily simulated and recorded streamflow and between the simulated and recorded suspended sediment load except few partial differences. The following conclusions were drawn from the results after testing the watershed and erosion model. 1. The watershed and erosion model is a deterministic lumped parameter model, and is capable of simulating the daily mean streamflow and suspended sediment load within a 20 percent error, when the correct watershed and erosion parameters are supplied. 2. It is found that soil erosion is sensitive to errors in simulation of occurrence and intensity of precipitation and of overland flow. Therefore, representative precipitation data and a watershed model which provides an accurate simulation of soil moisture and resulting overland flow are essential for the accurate simulation of soil erosion and subsequent sediment transport prediction. 3. Erroneous prediction of snowmelt in terms of time and magnitute in conjunction with The frozen ground could be the reason for the poor simulation of streamflow as well as sediment yield in the snowmelt period. More elaborate and accurate snowmelt submodels will greatly improve accuracy. 4. Poor simulation results can be attributed to deficiencies in erosion model and to errors in the observed data such as the recorded daily streamflow and the sediment concentration. 5. Crop management and tillage operations are two major factors that have a great effect on soil erosion simulation. The erosion model attempts to evaluate the impact of crop management and tillage effects on sediment production. These effects on sediment yield appear to be somewhat equivalent to the effect of overland flow. 6. Application and testing of the watershed and erosion model on watersheds in a variety of regions with different soils and meteorological characteristics may be recommended to verify its general applicability and to detact the deficiencies of the model. Futhermore, by further modification and expansion with additional data, the watershed and erosion model developed through this study can be used as a planning tool for watershed management and for solving agricultural non-point pollution problems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.847-852
• /
• 2011

Green manure crops are mainly used to reduce the application of chemical fertilizers. Mixture of green manure crops have beneficial effects in agroecosystem. In this study, experiments were conducted to evaluate the effects of monoculture and mixtures of crimson clover (Trifolium incarnatum) on rice growth and yield in paddy. This experiment was conducted at Sinheung series (fine loamy, mixed, nonacid, mesic family of Fluvaquentic Endoaquepts) from Oct. 2007 to Oct. 2009 at the National Institute of Crop Science (NICS), RDA, Suwon, Gyeonggi province, Korea. Seeding rates of crimson clover (CC) were consisted of monoculture (CC2, 3, 4 kg and hairy vetch 5 kg $10a^{-1}$) and mixtures (CC 2 + barley 7, CC 3 + barley 7, CC 4 + barley 7, and CC2 + hairy vetch $5kg\;10a^{-1}$). Seeds were drilled by partial tillage machine on 9th Oct. in 2007. Monoculture and mixture of crimson clover as a green manure crop was incorporated in soil for rice cultivation on 15th May in 2008. Chemical fertilizers had not been applied to monoculture and mixture plots. The biomass and N production of monoculture plots were lower than mixture plots. The biomass and N production of CC 2 + hairy vetch $5kg\;10a^{-1}$ plot were the highest among mixtures treatments. In rice growing season, ammonium nitrogen concentrations in soil were a little high trends at CC 2 + hairy vetch $5kg\;10a^{-1}$ plot. And soil bulk density and porosity were improved at mixture plot after rice harvesting. The rice yield of CC 2 + hairy vetch $5kg\;10a^{-1}$ plot was not significantly different from conventional practice plot. These results indicated that cropping of crimson clover with hairy vetch mixture was better than barley mixture for environmental friendly rice cultivation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.853-858
• /
• 2011

The cultivation methods are important for determining crop yield of green manure. The effect of cultivation methods of green manure crops (GMC) on biomass and rice yield was investigated. This experiment was conducted at Sinheung series (fine loamy, mixed, nonacid, mesic family of Fluvaquentic Endoaquepts from Oct. 2007 to Oct. 2008 at the National Institute of Crop Science (NICS), RDA, Suwon, Gyeonggi province, Korea. Seven GMC (hairy vetch, barley, Chinese milk vetch, rye, crimson clover, oats, rattail fescue) were cultivated and incorporated on paddy soil by broadcasting before rice harvesting (BBRH) and partial tillage seeding (PTS). Among the three leguminous GMC, the biomass and N production were the highest at the hairy vetch of PTS. Among the four gramineae GMC, the biomass and N production tended to be higher in the rye of BBRH and barley of PTS. The C/N ratio (56.5~74.2) of rye was high compared with hairy vetch (14.1). Among the GMC, the incorporation of hairy vetch increased $NH_4$-N contents in rice paddy soil at 14 and 42 days after transplanting. These results showed that hairy vetch had no significant to rice yield compared with conventional fertilization. Therefore, hairy vetch seems to be the most efficient green manure crop as an alternatives to chemical N fertilizer in the central regions of Korea.