• Korean Journal of Ecology and Environment
• /
• v.33 no.3 s.91
• /
• pp.197-205
• /
• 2000

Factors most strongly related to zooplankton growth rates were studied along a lake and a river stretch in the middle part of the lowland River Spree. The study was conducted at the lake inflow (S1), the lake outflow (S2), and at the end of a 21 km stretch of the outflow (S3) from March to November of 1999. Total zooplankton biomass increased significantly at S2 and then sharply decreased at S3. The abundance of microzooplankton (rotifers and nauplii) was strongly higher than macrozooplankton (cladocerans and copepodids) at all station. However, macrozooplankton biomass (${\mu}$g dw 1$^{-1}$) was similar or much higher than microzooplankton biomass. Large-bodied cladocerans (Daphnia cucullata) dominated at S2 while small-bodied cladocerans (Bosmina longirostris) dominated at S1 and S3. Patterns in growth rates (r$_{t}$ in d$^{-1}$ of the major zooplankton community were greatly different between S1 and S2 (lake stretch) and between S2 and S3 (river stretch). In the lake, growth rates generally were positive, while values of growth rates were negative in the river stretch. Among the environmental variables considered, partial retention time (PRT, d$^{-1}$) seemed to play the most important role in determining characteristics of the zooplankton community structure in the middle part of River Spree.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.3
• /
• pp.377-381
• /
• 1993

Twenty male crossbred ($Sahiwal{\times}HF$) calves of about 6-9 months of age were divided into four groups of five animals each. All the animals were offered wheat straw ad lib. As the basal feed. However, animals in group I were fed concentrate mixture while the animals in groups II, III and IV had free access to urea molasses mineral block (UMMB) lick (I), (II) and (III) respectively as a partial substitute of concentrate mixture. The average concentrate offered (kg/day) to the animals was significantly (p<0.01) higher in group I ($2.69{\pm}0.18$) compared to groups II ($1.76{\pm}0.15$), III ($1.70{\pm}0.06$) and IV ($1.65{\pm}0.12$). The UMMB lick consumed was non-significantly different amongst groups I ($535.40{\pm}38.14$), II ($525.60{\pm}31.82$), III ($551.00{\pm}38.49$) and IV ($548.80{\pm}45.46$). Except ether extract, the digestibility coefficients of CP, ADF and NDF were non-significantly different in different groups. Similarly, N balance (g/day) and percent N retention of intake was not affected in different groups on supplementation of UMMB lick. Body composition of animals was similar in different groups supplemented with either concentrate mixture or concentrate mixture and UMMB licks. It may be concluded from these studies that UMMB lick can partially replace the concentrate mixture in the diet of growing calves without affecting the growth rate, nutrient utilization and body composition. The UMMB lick, thus, can form a part of the ration economically in the diet of growing ruminants especially in developing countries.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.2
• /
• pp.149-159
• /
• 2020

Cured-in-place-pipe(CIPP) is the most adopted trenchless application for sewer rehabilitation to extend the life of the existing sewer without compromising both direct construction and indirect social costs especially applied in the congested urban area. This technology is globally and domestically known to be the most suitable for partial and full deteriorated pipe structure rehabilitation in a sewer system. The typical design of CIPP requires a significant thickness of lining to support loading causing sewage flow interruption and increasing material cost. This paper presents development of a high strength glass fiber composite lining material for the CIPP application and structural test results. The test results exhibit that the new glass fiber composite lining material has 12 times of flexural strength, 6.2 times of flexural modulus, and 0.5 Creep Retention Factor. These test results can reduce lining design thickness 35% at minimum. Even though taking into consideration extra materials such as outer and inner films for actual field applications, the structural capacity of the composite material significantly increases and it reduces 20 percent or more line thickness as compared to the conventional CIPP. We expect that the newly developed CIPP lining material lowers material costs and minimizes flow capacity reduction, and fully replaceable to the conventional CIPP lining materials.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.7
• /
• pp.1096-1103
• /
• 1999

A study was conducted to clarify the impact of recombinant porcine somatotropin (pST) on the efficiency of absorbed nitrogen use for protein deposition in growing pigs. Three levels of dietary crude protein (9.0, 11.5, 14.0% CP) were used. Each had either a sub-optimum or near optimum lysine: CP concentration (Low-lysine, 3.8 g/100 g CP and High-lysine, 5.5 g/100g CP) in order to achieve different metabolic efficiencies for nitrogen deposition (ca. 45 vs. 60%). Twelve crossbred female pigs $(59{\pm}4kg\;BW)$ were placed in metabolism cages and fitted with bladder catheters. Each pig received an excipient injection daily for the first 10-d, a pST (5 mg/d) injection for the second 10-d, and then excipient for the last 10-d. Pigs were randomly assigned to one of six dietary treatments (2 pigs/diet) and fed 4 times per d at $92g/kg\;BW^{0.75}$ $(3{\times}maintenance)$. Means for the excipient period were compared to means for the pST period. Urinary nitrogen (N) output declined in pST-treated pigs (p<0.01) irrespective of dietary protein content or lysine level. Nitrogen retention increased by an average of 11% (p<0.01) with pST treatment (726 vs. $803mg\;N/kg^{0.75}\;BW/d$). Forty-eight percent of the absorbed N was retained with Low-lysine diets, but this increased to 53% with pST injection (+11%, p<0.01). Pigs fed High-lysine diets retained 62% of absorbed N which increased to 69% with pST (+11% p<0.01). the addition of lysine improved N use by 27% (High vs. Low, p<0.01), but the effect of lysine and pST was additive (+40%). Therefore, pST improves N retention and the efficiency of apparently absorbed N use in growing pigs (>60kg). It does so with diets having the potential for either low or high efficiencies of N use (48% and 62%). More work is needed to determine if the partial efficiency of N use improves in direct proportion to pST dose since the improvement in protein deposition is a function of pST dose.

• The korean journal of orthodontics
• /
• v.43 no.4
• /
• pp.186-192
• /
• 2013

Objective: To analyze the fatigue resistance, debonding force, and failure type of fiber-reinforced composite, polyethylene ribbon-reinforced, and braided stainless steel wire lingual retainers in vitro. Methods: Roots of human mandibular central incisors were covered with silicone, mimicking the periodontal ligament, and embedded in polymethylmethacrylate. The specimens (N = 50), with two teeth each, were randomly divided into five groups (n = 10/group) according to the retainer materials: (1) Interlig (E-glass), (2) everStick Ortho (E-glass), (3) DentaPreg Splint (S2-glass), (4) Ribbond (polyethylene), and (5) Quad Cat wire (stainless steel). After the recommended adhesive procedures, the retainers were bonded to the teeth by using flowable composite resin (Tetric Flow). The teeth were subjected to 10,00,000 cyclic loads (8 Hz, 3 - 100 N, $45^{\circ}$ angle, under $37{\pm}3^{\circ}C$ water) at their incisoproximal contact, and debonding forces were measured with a universal testing machine (1 mm/min crosshead speed). Failure sites were examined under a stereomicroscope (${\times}40$ magnification). Data were analyzed by one-way analysis of variance. Results: All the specimens survived the cyclic loading. Their mean debonding forces were not significantly different (p > 0.05). The DentaPreg Splint group (80%) showed the highest incidence of complete adhesive debonding, followed by the Interlig group (60%). The everStick Ortho group (80%) presented predominantly partial adhesive debonding. The Quad Cat wire group (50%) presented overlying composite detachment. Conclusions: Cyclic loading did not cause debonding. The retainers presented similar debonding forces but different failure types. Braided stainless steel wire retainers presented the most repairable failure type.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.339-347
• /
• 1994

A multicolumn system consisted of two valve(10-port and 6-port valve)-three column (28% DC 200, SP 1700 and Chromosorb 102 column) was developed. Nine natural gas components composed of $N_2$, $CH_4$, $CO_2$, $C_2H_6$, $C_3H_8$, $i-C_4H_{10}$, $n-C_4H_{10}$, $i-C_5H_{12}$ 및 $n-C_5H_{12}$ completed all the baseline separation within 18 minutes. The accuracy and the precision of this system was tested. The retention times and the peak areas were determined with a repeatability between 0.02 and 0.16%, and less than 1%, respectively. Calibration curves for natural-gas components were plotted by the partial pressure injection method of pure gases, and good linear relationships for each component were presented. By using these calibration curves the accuracy of the multicolumn system compaired with that of the single column system for a certified standard gas of natural gas. As a result, relative error in the single and the multicolumn system was less than 0.5% and 0.04%, respectively. The result of application of this system in the analysis of importing LNG composition showed that the heating values calculated by the multicolum system were estimated lower compared with those calculated by the single column system and consequently, the importing price of LNG was able to be cut down.

• The Journal of the Petrological Society of Korea
• /
• v.4 no.2
• /
• pp.153-167
• /
• 1995

Emplacement ages for the granite plutons of the Jurassic and the Cretaceous times in the central Ogcheom Fold Belt were determined by Rb-Sr whole rock and mineral isocheon methods. In addition mineral ages for the plutons were determined by K-Ar and fission track methods. In turn, thermal histories and uplifting rates of the granitic bodies are elucidated from the isotopic ages. The Jecheon(~203 Ma) and Mungyeong(at lest~200 Ma) granites of the Jurassic and the Muamsa, Wolagsan and Daeyasan granites(~110 Ma) of the Cretaceous show high strontium initial ratios [$(^{87}Sr/^{86}Sr)_1$0.7100],suggesting that the granitic magmas have been generated by partial melting of crustal materials (S-type), or by mixing of mantle and crustal materials. Only mineral ages of the Sogrisan and Hyeongjebong granites (~90 Ma) were determined by K-Ar method, and petrogenesis of them were not defined yet. The two Jurassic granite plutons were cooled rapidly down to $300^{\circ}C$, right after the plutons were slowly cooled down since then, due to their deep emplacment. During the Middle Cretaceous period, the Jurassic Mungyeong granitic pluton was intruded and thermally affected much by the surrounding Wolagsan and Daeyasan granites. Accordingly the Rb-Sr mineral age, K-Ar hornblende and biotite ages of the Mungyeong granite appear to be reduced or reset due to the thermal effects above their blocking temperatures. All the cretaceous granites have been cooled much ore simply and rapidly down than the Jurassic ones below $300^{\circ}C$, owing to their shallow emplacement.