• 대한치과보철학회지
• /
• 제46권3호
• /
• pp.290-297
• /
• 2008

STATEMENT OF PROBLEM: Implant-supported fixed cantilever prostheses are influenced by various biomechanical factors. The information that shows the effect of implant number and position of cantilever on stress in the supporting bone is limited. PURPOSE: The purpose of this study was to investigate the effect of implant number variation and the effect of 2 different cantilever types on stress distribution in the supporting bone, using 3-dimensional finite element analysis. MATERIAL AND METHODS: A 3-D FE model of a mandibular section of bone with a missing second premolar, first molar, and second molar was developed. $4.1{\times}10$ mm screw-type dental implant was selected. 4.0 mm height solid abutments were fixed over all implant fixtures. Type III gold alloy was selected for implant-supported fixed prostheses. For mesial cantilever test, model 1-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 1-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 1-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with mesial cantilever were simulated. And then, 155N oblique force was applied to the buccal cusp of second premolar. For distal cantilever test, model 2-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 2-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 2-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with distal cantilever were simulated. And then, 206N oblique force was applied to the buccal cusp of second premolar. The implant and superstructure were simulated in finite element software(Pro/Engineer wildfire 2.0). The stress values were observed with the maximum von Mises stresses. RESULTS: Among the models without a cantilever, model 1-1 and 2-1 which had three implants, showed lower stress than model 1-2 and 2-2 which had two implants. Although model 2-1 was applied with 206N, it showed lower stress than model 1-2 which was applied with 155N. In models that implant positions of models were same, the amount of applied occlusal load largely influenced the maximum von Mises stress. Model 1-1, 1-2 and 1-3, which were loaded with 155N, showed less stress than corresponding model 2-1, 2-2 and 2- 3 which were loaded with 206N. For the same number of implants, the existence of a cantilever induced the obvious increase of maximum stress. Model 1-3 and 2-3 which had a cantilever, showed much higher stress than the others which had no cantilever. In all models, the von Mises stresses were concentrated at the cortical bone around the cervical region of the implants. Meanwhile, in model 1-1, 1-2 and 1-3, which were loaded on second premolar position, the first premolar participated in stress distribution. First premolars of model 2-1, 2-2 and 2-3 did not participate in stress distribution. CONCLUSION: 1. The more implants supported, the less stress was induced, regardless of applied occlusal loads. 2. The maximum von Mises stress in the bone of the implant-supported three unit fixed dental prosthesis with a mesial cantilever was 1.38 times that with a central pontic. The maximum von Mises stress in the bone of the implant-supported three-unit fixed dental prosthesis with a distal cantilever was 1.59 times that with a central pontic. 3. A distal cantilever induced larger stress in the bone than a mesial cantilever. 4. A adjacent tooth which contacts implant-supported fixed prosthesis participated in the stress distribution.

• 대한치과보철학회지
• /
• 제60권1호
• /
• pp.29-36
• /
• 2022

상악 무치악 환자의 구강 회복을 계획할 때 치료 방법으로 임플란트를 이용한 고정성 보철 수복과 총의치 수복 또는 임플란트를 이용한 오버덴쳐 등을 고려할 수 있다. 총의치 수복의 경우 추가적인 수술이 필요 없고 상대적으로 경제적이며 임플란트 지지 고정성 보철 수복의 경우 일반적으로 총의치 수복에 비해 기능적인 부분이 우수하지만 임상적으로 임플란트 식립이 어려운 경우가 존재한다. 최근에는 환자의 요구 및 잔존 치조골의 상태 등을 고려하여 부분적으로 임플란트를 식립한 후 임플란트 지지 서베이드 크라운을 이용한 가철성 국소의치 수복도 시도되고 있다. 본 증례는 상악 전방부의 임플란트 지지 서베이드 크라운을 이용한 가철성 국소의치 수복을 시행한 증례로 심미 및 기능적으로 만족할 만한 결과를 보여 보고하는 바이다.

• 대한치과보철학회지
• /
• 제61권2호
• /
• pp.135-142
• /
• 2023

일명 '메릴랜드 브릿지'로 불리는 Resin-bonded fixed partial denture (RBFPD)는 전치부 결손부위를 수복하는데 있어 침습범위를 최소화하는 보존적 보철치료로 잘 정립되어 있다. 하지만 RBFPD의 여러 이점에도 불구하고 높은 탈락률, 비심미성, 지지체 파절 등으로 인해 보편적인 치료방법으로 선택되지는 못하였다. 최근 치과 재료의 발달과 함께 지르코니아가 RBFPD의 새로운 재료로 도입되면서 강도와 심미성이 개선된 전치부 RBFPD의 적용에 적합한 재료로 평가받고 있다. 본 증례는 상악 좌측 측절치를 상실한 환자에서 지르코니아 RBFPD를 수복한 증례로, 전치부에서 비침습적이며 심미적인 보철물을 이용하여 치아상실부위를 수복하였고, 환자와 술자 모두 만족하는 결과를 얻었기에 본 증례를 보고하는 바이다.

• 대한심미치과학회지
• /
• 제23권1호
• /
• pp.34-40
• /
• 2014

부분 무치악을 수복하는 데 있어서 선택할 수 있는 치료의 옵션으로는 전통적인 국소의치와 임플란트 지지-고정성 보철물 등이 있다. 하지만, 환자의 전신적 또는 구강의 상태(수술적인 술식이 제한되는 전신병력, 지지조직의 부족 그리고 골유착에 실패한 임플란트)와 치료비용에 대한 허용 정도에 따라 모든 옵션이 항상 가능한 것은 아니다. 가철성 국소의치는 임플란트 고정성 보철물에 비해 구강위생 관리 및 상,하악 악간관계의 부조화를 수정하기에 편리한 장점이 있다. 최근에는 전략적 위치에 임플란트를 식립하여 기존 악궁 형태에서는 제한되는 국소의치 디자인의 한계를 개선할 수 있는 임플란트지지형 RPD(Implant Supported Removable Partial Denture)가 새로운 방안으로 대두되고 있다. ISRPD는 전략적 위치에 임플란트를 식립하여 역학적인 한계를 극복할 수 있을 뿐 만 아니라 전악의 임플란트지지형 고정성 보철이 제한되는 환자에서 보다 경제적이고 현실적인 보철적 해결책이 될 수 있다. 따라서, RPD를 이용한 보철계획 수립시 전략적 위치에서의 임플란트의 사용은 고전적인 가철성 국소 의치에서보다 유지력과 안정성을 증진시키고 구강위생관리 또한 용이하여 환자의 적응도를 높이는 방안으로 고려될 수 있다. 본 증례는 상악 양측 구치부의 임플란트 고정성 보철,하악의 bar-type overdenture를 사용중이던 59세 남성환자에서 상악 #15i임플란트의 abutment screw fracture와 임플란트의 골유착 실패로 인한 다수 임플란트를 발거 후 남은 #15i,24i,25,26,i의 잔존 임플란트와 #23 자연치를 활용해 상악에 ISRPD를 적용한 경우이다. #23 surveyed crown, #24i=25i=26i surveyed bridge 및 #15i에 gold coping을 제작하여 국소의치의 지지와 유지,안정을 도모하였다.최종 보철물을 장착하고 2년간 주기적인 follow up 통해 예후를 관찰중이며 지대치로 사용한 임플란트에서 screw loosening이나 파절, 골흡수 등의 증상은 현재까지 관찰되지 않았다.

• 대한족부족관절학회지
• /
• 제12권1호
• /
• pp.41-46
• /
• 2008

Purpose: This study was designed to evaluate characteristics of foot pressure distribution with or without partial prosthetic foot in transmetatarsal amputee. Materials and Methods: The subjects were 9 transmetatarsal amputees. Foot pressures were measured at hallux, the $1^{st}-5^{th}$ metatarsal head (MTH), mid-foot, condyle area by F-scan system in amputated or contralateral foot during active walking. Results: In amputated foot, mean peak pressure was greatest in midfoot without prosthetic foot but it was greatest in hindfoot with prosthetic foot. In unaffected foot, although mean peak pressure was higher in hallux, and $1-5^{th}$ MTH compared to amputated foot, it was greatest in hind foot both with and without prosthetic foot. However, in unaffected foot, mean peak pressure significantly decreased in hallux and $5^{th}$ MTH after wearing the prosthetic foot. There was a significant difference in mean peak pressure in hallux and $5^{th}$ MTH between amputated and unaffected foot after wearing prosthetic foot. However, other region had no significant difference with or without prosthetic foot between feet. Conclusions: The use of partial prosthetic foot tends to shift weight bearing from the heel area to forefoot and could significantly reduce hind foot peak pressure and redistributed to peak pressure. The partial prosthetic foot can also offer the peak pressure to reduction both amputated foot and unaffected foot and help to toe off during walking.

• 대한치과보철학회지
• /
• 제55권1호
• /
• pp.94-99
• /
• 2017

CAD/CAM (computer-aided design/computer-aided manufacturing) 기술을 이용한 인레이 및 여러 고정성 보철물의 제작이 보편화되고 구강내 스캐너가 널리 보급되면서 디지털 치의학의 개념이 치과 보철학 분야 전반에 적용되고 있다. 그러나 가철성 보철 부분에서는 디지털 개념의 적용이 쉽지 않으며 기존의 주조 방식에 많이 의존하고 있다. 따라서 가철성 보철물의 제작 과정에 이런 개념을 적용해보려는 시도는 중요한 의미가 있다. 본 증례에서는 하악 Kennedy class III 무치악 환자에서 보철적, 심미적 요구에 의한 교합고경의 증가와 함께 CAD 및 쾌속조형술(RP, rapid prototyping)을 이용한 가철성 국소의치를 제작하였다. CAD를 이용하여 서베잉 및 국소의치 금속 구조물을 설계하였으며, 쾌속조형술은 금속 구조물을 주조하기 위한 레진 패턴 제작에 이용하였다. 9개월 간의 임상적 관찰 기간 동안 만족스러운 심미적, 기능적 결과를 얻어 이를 보고하고자 한다.

• 대한치과보철학회지
• /
• 제40권6호
• /
• pp.590-596
• /
• 2002

The resin : metal interface is at the basis of most bonding failures in resin-bonded prosthesis. Although debonding has been a problem with adhesive fixed partial dentures, various dentists classify them as long-term restorations. The advantages of resin-bonded fixed partial dentures include minimal tooth reduction and the possibility of rebonding. if resin-bonded protheses can be easily rebounded, it is of clinical importance to know if the lutingagents rebond as well the second time as they did originally. Several retentive systems for resin-to-metal bonding have recommended. Treatments such as electrolytic etching and silicone coating, despite the good result of bond strength, have proved to be time-consuming and technique-sensitive. Therefore a simple and more reliable method is desirable. This study evaluated the effect of metal surface treatments on the rebond strength of panavia 21 cement to a nickel-chromium(Ni-Cr) alloy. The samples were received the following surface treatments : Group No.1 (control or served as the control) treatment with sandblasting with 50um aluminum oxide and ultrasonically cleaned for 10minutes in double-deionized water, Group No.2 were no surface treatments. Group No.3 were treated with metal primer. Group No.4 were treated with sandblasting as previously described, and then metal priming. From the analysis of the results, the following conclusions were drawn. 1. Sandblasting and metal priming appears to be an effective method for treatment of metal after accidental debonding. 2. Group without surface treatment had significantly lower bond strengths compared with other groups. 3. The combination of sandblasting and metal priming may not develop superior bonding strengths compared with other techniques that used the Ni-Cr alloys. 4. Combination of cohesive and adhesive failures were the most common type observed. The results support the use of sandblasting as a viable procedure when rebonding accidentally lost adhesive partial denture. We concluded that sandblasting and metal priming of metal surface before bonding could provide the adequate bond strength during rebonding of resin-bonded fixed partial denture.

• 구강회복응용과학지
• /
• 제32권3호
• /
• pp.214-223
• /
• 2016

임플란트를 보조적으로 이용함으로써 후방 연장 국소의치에 부가적으로 유지와 지지를 얻는 임플란트 보조 국소의치(implant-assisted RPD, IARPD)에 대한 관심이 증가하고 있다. 본 증례는 장기간 후방연장 국소의치의 사용으로 인하여 심하게 기울어진 교합평면을 가진 부분 무치악 환자에서 상악의 고정성 보철 수복과 하악의 지르코니아 교합면을 가지는 임플란트 보조 국소의치를 이용하여 심미적이며 장기적으로 안정적인 교합평면을 가지도록 전악 수복하였으며, 기능적으로 만족스러운 결과를 얻었기에 이를 보고하고자 한다.

• 대한치과기공학회지
• /
• 제40권4호
• /
• pp.239-247
• /
• 2018

Purpose: The purpose of this study was to investigate the denture attachment status and the denture need of elderly Koreans and to provide basic data for improving the quality of life by developing methods and education programs for the oral health of the elderly. Methods: This study selected 4,340 persons who completed questionnaires and oral examinations among elderly people aged 65 or older only from the National Health and Nutrition Examination Survey data of the 6th period (2013-2015). Results: There was a significant relationship between age, residence, and education level in complete dentures. There was a significant relationship between gender, age, residence, and education level in the partial denture wearing state. In the complete denture need, there was a significant relationship with age. The need for partial denture was found to be significant in gender, age, and residence. Conclusion : Based on the results of this study, it can be used as basic data for oral health education and dental prosthesis related to denture which can improve oral health of the elderly in the future.

• 대한치과보철학회지
• /
• 제44권4호
• /
• pp.394-404
• /
• 2006

Statement of problem: A conventional 3-unit fixed partial denture design with a pontic between two retainers is the most commonly used. However in cases where the mental nerve is in close proximity to the second premolar, a cantilever design can be considered. As such, logical and scientific evidence is lacking for the number and position of implants to be placed for partially edentulous patients, and no clear-cut set of treatment principles currently exist. Purpose : The purpose of this study was to evaluate prognosis of implant-supported fixed partial dentures and to compare changes in bone level which may rise due to the different factors. Material and method : The present study examined radiographical marginal bone loss in patients treated with implant-supported fixed partial dentures (87 prostheses supported by 227 implants) and evaluated the influence of the span of the pontic, type of the opposing dentition. Clinical complications were studied using a retrospective method. Within the limitation of this study. the following result were drawn Result, 1. Seven of a total of 227 implants restored with fixed prostheses failed, resulting in a 96.9% success rate. 2. Complications encountered during recall appointments included dissolution of temporary luting agent (17 cases), porcelain fracture (8 cases), loosened screws (5 cases), gingival recession (4 cases), and gingival enlargement (1 case). 3. Marginal bone loss, 1 year after prosthesis placement, was significant(P<0.05) in the group that underwent bone grafting, however no difference in annual resorption rate was observed afterwards. 4. Marginal bono loss, 1 year post-placement, was greater in cantilever-type prostheses than in centric pontic protheses (P<0.05). 5. Marginal bone loss was more pronounced in posterior regions compared to anterior regions (P<0.05). 6. The degree of marginal bone loss was proportional to the length of the pontic (P<0.05). Conclusion: The success rate of implant-supported fixed partial dentures, including marginal bone loss, was satisfactory in the present study. Factors influencing marginal bone loss included whether bone graft was performed, location of the pontic (s), location of the surgical area in the arch pontic span. Long-term evaluation is necessary for implant-supported fixed partial dentures, as are further studies on the relationship between functional load and the number of implants to be placed.