• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.103-108
• /
• 2016

In communication systems the solution of the problem of maximizing the mutual information between the input and output of a channel composed of several subchannels under total power constraint has a waterfilling structure. OFDM and MIMO can be decomposed into parallel subchannels with CSI. Waterfilling solves the problem of optimal power allocation to these subchannels to achieve the rate approaching the channel capacity under total power constraint. In waterfilling, more power is alloted to good channels(high SNR) and less or no power to bad channels to increase the rate of good channels, resulting in channel capacity. Waterfilling finds the exact water level satisfying the power constraint employing an iterative algorithm to estimate and update the water level. In this process computation of partial sums of inverse of square of subchannel gain is repeatedly required. In this paper we reduced the computation time of waterfilling algorithm by replacing the partial sum computation with reference to an array which contains the precomputed partial sums in initialization phase.

• Journal of the Korean Ceramic Society
• /
• v.43 no.6 s.289
• /
• pp.362-368
• /
• 2006

Epitaxial $Ba_{0.5}Sr_{0.5}TiO_3$ (BSTO) thin films have been grown on TiN buffered Si (001) substrates by Pulsed Laser Deposition (PLD) method and the effects of substrate temperature and oxygen partial pressure during the deposition on their dielectric properties and crystallinity were investigated. The crystal orientation, epitaxy nature, and microstructure of oxide thin films were investigated using X-Ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). Thin films were prepared with laser fluence of $4.2\;J/cm^2\;and\;3\;J/cm^2$, repetition rate of 8 Hz and 10 Hz, substrate temperatures of $700^{\circ}C$ and ranging from $350^{\circ}C\;to\;700^{\circ}C$ for TiN and oxide respectively. BSTO thin-films were grown on TiN-buffered Si substrates at various oxygen partial pressure ranging from $1{\times}10^{-4}$ torr to $1{\times}10^{-5}$ torr. The TiN buffer layer and BSTO thin films were grown with cube-on-cube epitaxial orientation relationship of $[110](001)_{BSTO}{\parallel}[110](001)_{TiN}{\parallel}[110](001)_{Si}$. The crystallinity of BSTO thin films was improved with increasing substrate temperature. C-axis lattice parameters of BSTO thin films, calculated from XRD ${\theta}-2{\theta}$ scans, decreased from 0.408 m to 0.404 nm and the dielectric constants of BSTO epitaxial thin films increased from 440 to 938 with increasing processing oxygen partial pressure.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.4
• /
• pp.41-47
• /
• 2016

A bypass diode is connected in parallel to solar cells with opposite polarity. The advantage of using the bypass diode is circumvented a destructive efforts of hot-spot heating in the photovoltaic(PV) module. In addition, it is possible to reduce a energy loss under the partial shading on the PV module. This paper presents a characteristic of photovoltaic module under partial shading condition and with defective bypass diode by using the experimental data. The results of field testing for each photovoltaic modules, when photovoltaic system which is connected power grid is operating, the inner junction-box temperature of shading photovoltaic module is high $5^{\circ}C$ because of difference of flowing current through into bypass diode. And incase of not operating photovoltaic system, the inner junction-box temperature of module with defective bypass diode is greatly higher than partial shading PV module.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.628-636
• /
• 2010

In this paper, we present a new type high speed parallel multiplier for performing the multiplication of two polynomials using standard basis in the finite fields GF($2^m$). Prior to construct the multiplier circuits, we design the basic cell of vector code generator(VCG) to perform the parallel multiplication of a multiplicand polynomial with a irreducible polynomial and design the partial product result cell(PPC) to generate the result of bit-parallel multiplication with one coefficient of a multiplicative polynomial with VCG circuits. The presented multiplier performs high speed parallel multiplication to connect PPC with VCG. The basic cell of VCG and PPC consists of one AND gate and one XOR gate respectively. Extending this process, we show the design of the generalized circuits for degree m and a simple example of constructing the multiplier circuit over finite fields GF($2^4$). Also, the presented multiplier is simulated by PSpice. The multiplier presented in this paper uses the VCGs and PPCS repeatedly, and is easy to extend the multiplication of two polynomials in the finite fields with very large degree m, and is suitable to VLSL.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.20-35
• /
• 2016

In this paper, in order to reduce the delay and area of the partial product accumulation (PPA) of the parallel decimal multiplier, a tree architecture that composed by multi-operand decimal CSAs and improved CLA is proposed. The proposed tree using multi-operand CSAs reduces the partial product quickly. Since the input range of the recoder of CSA is limited, CSA can get the simplest logic. In addition, using the multi-operand decimal CSAs to add decimal numbers that have limited range in specific locations of the specific architecture can reduce the partial products efficiently. Also, final BCD result can be received faster by improving the logic of the decimal CLA. In order to evaluate the performance of the proposed partial product accumulation, synthesis is implemented by using Design Complier with 180 nm COMS technology library. Synthesis results show the delay of the proposed partial product accumulation is reduced by 15.6% and area is reduced by 16.2% comparing with which uses general method. Also, the total delay and area are still reduced despite the delay and area of the CLA are increased.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.786-789
• /
• 2005

An acoustic total or partial enclosure is widely used to reduce the sound pressure level propagating from a noise source. However, the performance of the acoustic enclosure is decreased by its inherent limitations such as temperature rise or acoustic pressure build up inside the enclosed acoustic field. In general, a silencer is installed to overcome these limitations, for large amount of air can be exchanged through the silencers. In this reason, a parallel baffle type duct silencer with acoustic resonators is studied to reduce the transmitted noise from a transformer. In this silencer, the high frequency components of the transmitted noise over 360Hz are effectively absorbed by the parallel baffles and the other ones, 120 and 240 Hz, are reduced due to the presence of Helmholtz resonators. Large sound attenuation is achieved by applying the sound resonating barrier to the large transformers in a substation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.2846-2859
• /
• 1994

This work deals with kinematic analysis of fault-tolerant 3 degree-of-freedom spherical modules which have force redundancies in its parallel structure. The performance of a redundantly actuated four-legged module with no actuator failure, a single actuator failure, partial and half failure of dual actuator are compared to that of a three-legged module, in terms of maximum force transmission ratio, isotropic characteristics, and fault-tolerant capability. Additionally, a system with an excess number of small floating actuators is considered, and the contribution of these small actuators to the force transmission and fault-tolerant capability is evaluated. This study illustrates that the redundant actuation mode allows significant saving of input actuation effort, and also delivers a fault tolerance.

• Transactions of the Korean hydrogen and new energy society
• /
• v.8 no.2
• /
• pp.57-65
• /
• 1997

Thermal analysis has been performed to design a high-performance $LH_2$ vessel with about 1% per day evaporation loss. Analysis includes the combined insulations of MLI(Multi-Layer Insulation) and VCS (Vapor-Cooled Shield) under high vacuum. Combined insulation of MLI and VCS shows the existence of optimal location of VCS to minimize evaporation loss. Comparison of parallel-type DVCS (Double Vapor-Cooled Shield) and serial-type DVCS is also made to show the effectiveness of the system. The results indicate that the serial-type DVCS vessel is better than the parallel-type DVCS vessel with respect to overall evaporation loss. The combined insulation of SVCS (Single Vapor-Cooled Shield) with a partial MLI can give a similar performance characteristics compared to that with MLI and DVCS.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.89-92
• /
• 2001

In this paper, adaptive multi-stage parallel interference cancellation (PIC) receiver is considered for a multi-rate DS-CDMA system. In each stage of the adaptive multi-stage PIC receiver, multiple access interference (MAI) estimates are obtained using the sub-bit estimates from the Previous stage and the adaptive weights for the sub-bit estimates. The adaptive weights are obtained by minimizing the mean squared error between the received signal and its estimate through a least mean square (LMS) algorithm. It is shown that the adaptive multi- stage PIC receiver achieves smaller BER than the matched filter receiver, multi-stage PIC receiver, and multi-stage partial PIC receiver for the multi-rate DS-CDMA system in a Rayleigh fading channel.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1845-1850
• /
• 2009

We have performed replica-exchange molecular dynamics (REMD) simulations on the dimer formation of fibrilforming segments of $\alpha$-Synuclein (residues 71 - 82) using implicit solvation models with two kinds of force fields- AMBER parm99SB and parm96. We observed spontaneous formation of dimers from the extensive simulations, demonstrating the self-aggregating and fibril forming properties of the peptides. Secondary structure profile and clustering analysis showed that dimers with antiparallel $\beta$-sheet conformations, stabilized by well-defined hydrogen boding, are major species corresponding to global free energy minimum. Parallel dimers with partial $\beta$-sheets are found to be off-pathway intermediates. The relative instability of the parallel arrangements is due to the repulsive interactions between bulky and polar side chains as well as weaker backbone hydrogen bonds.