• 제목/요약/키워드: Partial defect

검색결과 446건 처리시간 0.031초

차체용 1.2GPa급 초고장력 TRIP강판의 저항 점 용접부 너겟 지름 예측에 관한 연구 (A Study on the Prediction of Nugget Diameter of Resistance Spot Welded Part of 1.2GPa Ultra High Strength TRIP Steel for Vehicle)

  • 신석우;이종훈;박상흡
    • 한국산학기술학회논문지
    • /
    • 제19권3호
    • /
    • pp.52-60
    • /
    • 2018
  • 최근 자동차 산업에서는 연비향상 및 안전규제 강화에 따라 차량 경량화가 필수적으로 요구됨에 따라 DP강(Dual Phase steel), CP강(Complex Phase steel), MS강(Martensitic Steel), TRIP강(Transformation Induced Plasticity steel), TWIP강(Twinning Induced Plasticity steel) 등과 같은 인장강도 700MPa 이상인 초고장력강(Ultra High Strength Steel)의 적용이 증가하고 있다. 초고장력강을 차체에 적용하기 위해서는 용접공정이 필수적이며, 원가 측면에서 유리한 전기저항점용접(Resistance Spot Welding, RSW)이 차체 용접에서 80%이상으로 가장 많이 적용되고 있다. 초고장력강은 강도향상을 위해 합금원소 함량을 늘이기 때문에 일반적으로 용접성이 열악한 것으로 알려져 있다. 이러한 초고장력강의 저항점용접의 경우 적정 용접조건 영역이 축소되고 용접부에서 계면파단 및 부분계면파단이 발생하는 것으로 보고되어 있어 결함 및 품질을 실시간으로 예측할 수 있는 용접품질 판정 연구가 활발히 진행되고 있다. 이에 따라 본 연구에서는 저항 점 용접을 수행할 때 검출되는 2차 회로 공정 변수를 이용하여 용접부의 동저항을 모니터링하고, 이 동저항 패턴에서 용접 품질 판단에 필요한 인자들을 추출하였다. 추출한 인자들을 상관분석하여 용접 품질과의 상관성을 파악하였으며, 상관성이 높은 인자들을 이용하여 회귀분석을 실시하였다. 이를 근거로 현장 적용이 가능한 회귀 모델을 제시하였다.

화상 반흔구축 재건 시 유리피판술의 적응증 및 적절한 피판의 선택 (Correction of Burn Scar Contracture: Indication and Choice of Free Flap)

  • 허지연;이종욱;고장휴;서동국;최재구;장영철;오석준
    • Archives of Plastic Surgery
    • /
    • 제35권5호
    • /
    • pp.521-526
    • /
    • 2008
  • Purpose: Most burn scar contractures are curable with skin grafts, but free flaps may be needed in some cases. Due to the adjacent tissue scarring, local flap is rarely used, and thus we may consider free flap which gives us more options than local flap. However, inappropriate performance of free flap may lead to unsatisfactory results despite technical complexity and enormous amount of effort. The author will discuss the points we should consider when using free flaps in treating burn scar contractures Methods: We surveyed patients who underwent free flaps to correct burn scar contractures from 2000 to 2007. We divided patients into two groups. The first group was those in which free flaps were inevitable due to exposure of deep structures such as bones and tendons. The second group was those in which free flap was used to minimize scar contracture and to achieve aesthetic result. Results: We performed 44 free flap on 42 patients. All of the flaps were taken well except one case of partial necrosis and wound dehiscence. Forearm free flap was the most common with 21 cases. Most of the cases(28 cases) in which free flaps were inevitable were on the wrist and lower limbs. These were cases of soft tissue defect due to wide and extensive burns. Free flaps were done in 16 cases to minimize scar contracture and to obtain aesthetic outcome, recipient sites were mostly face and upper extremities. Conclusion: When using free flaps for correction of burn scar contractures, proper release and full resurfacing of the contracture should be carried out in advance. If inadequate free flap is performed, secondary correction is more challenging than in skin grafts. In order to optimize the result of reconstruction, flap thickness, size and scar of the recipient site should be considered, then we can achieve natural shape, and minimize additional correction.

체외 순환 없이 시행한 선천성 좌심방 부속지류 절제술 (Resection of a Congenital Left Atrial Appendage Aneurysm without Extracorporeal Circulation)

  • 김용호;유재현;이석기;강신광;임승평;이영
    • Journal of Chest Surgery
    • /
    • 제42권2호
    • /
    • pp.244-247
    • /
    • 2009
  • 좌심방 부속지류는 매우 드문 질환으로 염증반응이나 퇴행성 변화로 발생할 수 있지만, 동반된 다른 기형이 없을 경우 선천성으로 생각할 수 있다. 선천성 좌심방 부속지류는 대부분 증상이 없어 우연히 발견되지만, 심방 세동, 상심실성 빈맥, 전신 색전증상, 심정지 등 합병증이 발생할 수 있어 진단되면 증상이 없어도 수술을 권장하고 있다. 개흉술을 통해 접근이 가능하지만, 기저부가 넓은 경우나 좌심방 부속지내에 혈전이 있는 경우에는 체외순환이 필요해 정중흉골 절개술이 필요할 수 있다. 저자들은 부분 심낭 결손증으로 오인되었던 선천성 좌심방 부속지류를 좌측 개흉술을 통해 체외순환 없이 성공적으로 수술하였기에 증례 보고를 하는 바이다.

구강 결손부에 적용된 요골 유리전완 피부피판 적용례 분석 (Clinical Cases Analysis of Forearm Free Fasciocutaneous Flaps on Oral Cavity Defect Area)

  • 김욱규;이광호;송원욱;황대석;김용덕;신상훈;김종렬;정인교
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제32권4호
    • /
    • pp.324-331
    • /
    • 2010
  • The radial forearm free flap (RFFF) has become a workhorse flap as a means of reconstructing surgical defects in the head and neck region. We have transferred 12 RFFFs with fasciocutaneous type on oral cavity defects in 12 patients after cancer resection and submucous fibrotic lesion ablation from 2005 to 2007 at Department of oral and maxillofacial surgery, Pusan National University Hospital. We reviewed retrospectively patients' charts and followed up the patients. Clinical analysis on the cases with RFFFs focusing on flap morbidity, indications and available vessels was done. The results of study are follows: 1. RFFF could be applied for all kind of defects after resection of tongue, floor of mouth, buccal mucosa, denuded bone of palate, maxilla, and mandible. 2. All free flaps could be used for primary reconstruction. The survival rate of 12 RFFFs was 92%. Partial marginal loss of the flaps was shown as 3 cases among 12 cases. Large size-vessels like superior thyroid artery, facial artery, internal jugular vein were favorable for microvascular anastomosis. 3. Parenteral nutrition instead of nasal L-tube also can be favorable for postoperative a week for better healing of the flap if the patients couldn't be tolerable with nasal tubing. 4. Donor sites with thigh skin graft were repaired with wrist band for 2 weeks. The complications included scarring, abnormal sensation on hand, and reduced grip strength in few patients, but those didn't induce major side effects. 5. Most RFFFs were well healed even if mortality rate of cancer patients was shown as 50% (5/10 persons). The mortality of patients was not correlated with morbidity of the flaps. We could identify the usefulness of RFFF for restoration of oral function, esthetics if the flap design, tissue transfer indications, and well controlled operation are proceeded.

산화된 $SrTiO_3$ 및 니켈도프된 $SrTiO_3$ 단결정의 전기전도도 (Electrial Conductivity of Oxidized Pure and Ni-Doped $SrTiO_3$ Single Crystals)

  • 김규홍;최재시
    • 대한화학회지
    • /
    • 제25권4호
    • /
    • pp.236-245
    • /
    • 1981
  • 순수한 $SrTiO_3$ 및 Ni 도프된 $SrTiO_3$ 단결정을 산화하여 700∼$1200^{\circ}C$$10^{-8}\;{\sim}\;10^{-1}$ atm의 온도 및 산소압력에서 산소압력의 함수로서 전기전도도를 측정하였다. 일정한 산소압력에서 전기전도도 값을 온도의 역수에 대하여 도시한 결과 직선관계를 나타내었으며 그 기울기로 부터 구한 활성화 에너지 값들은 순수한 $SrTiO_3$,에 대하여 1.34eV이며 Ni-doped $SrTiO_3$에 대하여 1.06eV이다. 일정한 온도에서 전기전도도 값을 산소분압에 대하여 도시한 결과 주어진 온도 범위에서 전기전도도의 산소압력 의존도가 -1/5.6${\sim}$-1.62로 나타났다. 실험치와 이론적으로 해석한 전기전도도의 산소 압력 의존성으로 부터 산소공위결합모델을 산화된 $SrTiO_3$와 Ni-doped $SrTiO_3$ 단결정에 이용할 수 있음을 알게 되었다. 주어진 온도 및 산소압력 범위에서 전기전도 메카니즘이 각각 제안되었다.

  • PDF

하순 및 하악골 정중열의 치험례 (MEDIAN CLEFT OF THE LOWER LIP AND MANDIBLE;A CASE REPORT)

  • 차두원;김현수;백상흠;김진수;변기정
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제23권3호
    • /
    • pp.263-269
    • /
    • 2001
  • 하순 및 하악골 정중열은 매우 드문 선천성 기형으로 , 하순절흔에서부터 하악은 물론 경부, 흉부까지 연장되어 다양하게 나타날 수 있으며, 원인은 확실하지 않으나 정중부로의 중배엽의 침투 실패, 하악돌기의 유합부전 그리고 외부 요인들이 논의되고 있다. 치료방법 및 시기에 관해서는 임상소견이 다양하고 증례가 드물기 때문에 많은 논란이 있어왔다. 그러나 현재의 경향은 연조직 기형은 연하 및 발음의 기능적 장애를 예방하기 위하여 가능한 조기에 치료하며, 악골고정을 위한 강선 결찰 혹은 골이식술은 사춘기 후로 미루는 추세이다. 본 교실에서는 저작 장애를 주소로 내원한 8세 여자 환자의 임상소견에서 하악골 정중열과 하순의 수술로 인한 반흔조직 및 하순에서부터 치조골을 가로지르는 섬유성 소대 등을 발견할 수 있었으며, 하악의 정중열을 장골 이식을 이용 하여 양호한 결과를 얻을 수 있었으며, 추후 하순과 순. 설측 전정의 연조직 기형은 심미성과 기능 향상을 위해 부가적인 술식이 필요하리라 생각된다.

  • PDF

유닛 모듈러 공법의 효율성 확보를 위한 공장제작, 운반, 현장설치의 최적 공정 제안 (A Proposal for Optimizing Unit Modular System Process to Improve Efficiency in Off-site Manufacture, Transportation and On-site Installation)

  • 이광복;김경래;신동우;차희성
    • 한국건설관리학회논문집
    • /
    • 제12권6호
    • /
    • pp.14-21
    • /
    • 2011
  • 모듈러 공법은 전체공정의 50%~90%를 공장에서 제작하여 이를 운반하여 현장에서 설치하는 공법이다. 이 공법은 현장에서 공정을 최소화하고 공장에서 작업을 극대화하여 공기를 단축하고 품질을 향상시킬 수 있다. 모듈러 공법으로 시공하면, 사용연한이 지나 건축물 철거시 일부 또는 전체를 재사용이 가능하기 때문에 건축폐기물까지 줄일 수 있는 친환경적인 공법이라고 할 수 있다. 이 모듈러 공법은 최근 수요가 증가하는 소형주택과 한국전쟁 당시 지어진 전방의 노후화된 병영시설의 교체에 적합한 공법이다. 경량철골을 사용한 모듈러 공법의 국내 시공 사례는 2003년 신기초등학교를 시작으로 군 병영시설에 확대 적용되고 있지만 아직까지 시장 초기단계이다. 따라서 범용 적으로 활용이 가능한 모듈 유닛의 표준과 공정의 표준정립이 시급한 상태이다. 본 연구에서는 기존 독신숙소의 신축 사례를 바탕으로 1인 숙소를 표준 모듈로 가정하고 모듈의 공장제작, 운반, 현장설치의 모듈러 공법의 최단 공사기간내의 최소 공사비 투입이 가능한 표준 공정을 제안하고자 한다. 공장에서 완성품을 제작하는 것이 가장 합리적이지만 운반시 하자발생을 감안한다면 공장제작비율 80%일 때 가장 합리적인 것으로 도출 되었다.

전외측 대퇴부 천공지 유리피판술의 실패 원인과 합병증 (The Result and Attentiveness of Reconstructive Surgery by Anterolateral Thigh Perforator Free Flap)

  • 강경동;이재우;김경훈;오흥찬;최치원;최수종;배용찬;남수봉;김정일;추기석
    • Archives of Plastic Surgery
    • /
    • 제38권1호
    • /
    • pp.27-34
    • /
    • 2011
  • Purpose: Anterolateral thigh (ALT) perforator free flap is commonly used because of its various benefits. The author reports important factors of preoperative and perioperative ALT perforator free flap and causes of failure. Methods: 84 patients who were treated with ALT perforator free flap from December 2004 to 2008, and February 2010 to April 2010 were studied. 61 patients were male and 23 were female. The mean age of patients was 51.1. The main cause was neoplasm and the main reconstructive areas were head and neck area. The size of flap was various from $3{\times}4$ to $12{\times}18$ cm. 6 patients received split thickness skin graft at donor site. Preoperative angiography was checked to all patients. Results: Among the 84 patients, partial necrosis of flaps occurred in 4 patients because of atherosclerosis, varicose vein, or inattention of patient, etc. And total flap necrosis in 5 patients because of abnormal vessels of recipient area or delay of operation, etc. One case of serous cyst was found as the complication of donor area. Two cases of skin graft on donor site were done because of suspected muscle compartment syndrome, 4 cases of that because of large flap. Septocutaneous perforators were found in 7 cases. The author couldn't find reliable perforator in 3 cases, ipsilateral anteromedial thigh perforator and contralateral ALT perforator and latissimus dorsi musculocutaneous free flap were done instead of ALT. There was no case which needed reoperation because of the impairment of blood supply, and 3 cases were revised by leech because of the burn injury by a lamp or venous congestion. Conclusion: Although ALT perforator free flap is widely used with its various merits, many factors such as preoperative condition of donor or recipient area, morphology of defect and operating time need to consider to prevent flap necrosis. And operators should need careful technique because septocutaneous perforator is uncommon, and musculocutaneous perforator is common but difficult to dissect.

$({\alpha}-Nb_2O_5)_{1-x^-}(PbO)_x$ 고용체의 전기전도도 (Study of the Electrical Conductivity of the $({\alpha}-Nb_2O_5)_{1-x^-}(PbO)_x$ Solid Solution)

  • 노권선;류광선;전종호;이성주;여철현
    • 대한화학회지
    • /
    • 제35권6호
    • /
    • pp.625-629
    • /
    • 1991
  • Lead Oxide를 2.5, 5.0, 7.5 및 10.0 mol%를 함유하는 Niobium Oxide-Lead Oxide계의 전기전도도를 2.0${\times}$$10^{-1}$${\sim}$1.0${\times}$$10^{-5}$ atm의 산소 부분압력하에서 700${\sim}$$1100^{\circ}C$의 온도에서 측정하였다. 본 계의 전기전도도는 PbO mol%가 증가함에 따라 감소하며 $10^{-5}$${\sim}$$10^{-1}$ $ohm^{-1}$ $cm^{-1}$ 범위에서 변하였다. 전기전도도의 활성화에너지는 약 1.70 eV이다. 전기전도도의 산소 부분압력 의존성은 높은 산소 부분압력에서는 이온 및 전자 전도성을 가진 혼합 전도체이고 낮은 산소 부분압력에서는 산소 부분압력의 -1/4승에 비례하는 의존성을 가진 n-type 전자 전도성을 나타내고 있다. 그 계의 결합구조와 전기전도 메카니즘을 얻어진 데이타와 관련시켜 논의하였다.

  • PDF

외성영역에서 ${\alpha}-Fe_2O_3$-CdO 계의 전도띠 모델 (Conduction Band Model of the System ${\alpha}-Fe_2O_3$-CdO at Extrinsic Region)

  • 김규홍;윤석호;권영植;최재시
    • 대한화학회지
    • /
    • 제31권5호
    • /
    • pp.406-412
    • /
    • 1987
  • 2.5 및 5.0mol% cd로 도프된 ${\alpha}-Fe_2O_3$의 전기전도도를 300 ~ 900$^{\circ}$C의 온도 및 10$^{-7}$ ~ 10$^{-1}$atm의 산소분압에서 각각 측정하였다. Log ${\sigma}$를 1/T에 대하여 도시한 결과, 산소분압이 $5{\times}10^{-2}$ atm보다 높은 영역에서 외성전도도가 나타났다. 5.0mol% Cd로 도프된 시료의 경우, 550$^{\circ}$C의 온도에서 전이점이 나타났으며 활성화에너지는 본성영역에서 1.34 eV, 외성영역에서 0.50 eV이다. 외성영역은 산소분압이 $5{\times}10$^{-2}$ atm 보다 낮은 경우, 본성영역으로 전환되었다. 따라서 산소분압이 $5{\times}10$^{-2}$ atm보다 낮은 경우 Cd-doped ${\alpha}-Fe_2O_3$의 전기전도도는 불순물 첨가효과에 관계없이 본성을 나타낸다. 본성에서의 결함구조는 Fe${2+}$ 틈새이며 외성영역에서는 산소공위이다. 전기전도도 메카니즘이 두 영역에서 각각 제시되었으며 외성영역에서 전도띠 모델이 제안되었다.

  • PDF