• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.631-635
• /
• 2000

Recently, the epoxy molded type PT for indoor and applied 25.8kV was often distroyed by degradation of insulation that effected many electric stress and defect of manufactured goods. therefore In this work, We can present a method of solution in the process of produce the PT through analysis of experiments. In order to reduce the PD (Partial Discharge) which was occurred at the insulation material of epoxy resin, we has many tried to remove faults In the process of the products,

• Proceedings of the KIEE Conference
• /
• 2006.07e
• /
• pp.23-24
• /
• 2006

Stator winding of hydro generator is gradually deteriorated by multi-stress and steady degradation of insulation results in insulation breakdown. The region where insulation breakdown occurs in stator winding is part where the multi-stress causes the defect of insulation material and electrical stress has been concentrated. Therefore, we judged locations of insulation breakdown to be varied according to various stress factors in service. In this paper, we drew the stator winding of hydro generators which has run for a long time and separated it into 3 parts(central part, end winding part, drawing part) according to the positions laid on the core. We performed electrical and thermal stress on these specimens for 1000 hrs under the same condition, measured the condition regularlyand analyzed the insulation status of each winding by performing partial discharge test. In addition, we analyzed the trend of partial discharge concerning specimens that caused the insulation breakdown during aging.

• Journal of Chest Surgery
• /
• v.19 no.4
• /
• pp.695-698
• /
• 1986

Only five instances of chylopericardium following cardiac surgery have been reported in the literature previously. We encounted this complication in a patient who was operated on for secundum atrial septal defect. The patient readmitted one month after discharge because of large amount of chylous pericardial effusion. Conservative treatment of pericardiostomy drainage and parenteral hyperalimentation was continued for 3 weeks without improvement. Partial pericardiectomy and pericardiopleural window was done with success and no recurrence of chylopericardium was observed upto 3 months after surgery. We think this is the first case report of chylopericardium after open heart surgery in Korea.

• Archives of Craniofacial Surgery
• /
• v.10 no.1
• /
• pp.49-54
• /
• 2009

Purpose: Inevitably, Maxillary structural defect follows maxillary cancer extirpation. Maxillary reconstruction is over every surgeon's head. Every physician tried to overcome limited donor site of craniofacial defect. We considered to suggest optimal method of inferior orbital wall defect in functional point as well as esthetic point. Methods: We performed wide excision of maxilla and vascularized partial thickness calvarial bone flap to reconstruct the defect from cancer extirpation in three cases. We select ipsilateral superficial temporal artery, vein and outer cortex of parietal bone flap as donor. And we applied bone flap as inferior orbital wall structure. The bony surface was wrapped with fascia to prevent direct contact between orbital contents and rough bony flap surface. Computed tomography image was checked during follolw up period. Results: We can observe these patients for over two years. In all three cases, We can get fair inferior orbital wall structure. Even though they got radiation therapy, there was no limitation of extraocular movements, no diplopia. no enophthalmos. Also there was minimal donor site morbidity. Conclusion: We suggest vascularized calvarial bone flap is practically excellent strategy for inferior orbital wall reconstruction.

• Journal of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.608-614
• /
• 1985

Electrical conductivities of $ZrO_2-Sm_2O_3$ systems containing 10, 20, 30, 40, and 50 mol% of $ZrO_2$ have been measured as a function of temperature and of oxygen partial pressure at temperature from 500 to 1000${\circ}C$ and oxygen partial pressures from 1 ${\times}10^{-5}to 1{\times}10^{-1}$ atm. Plots of log conductivity vs. 1/T are found to be linear with an inflection point at around 650$^{\circ}C$ and the temperature dependence of conductivity shows two different defect structures. The conductivities are increased with increasing pressure, slowing a p-type character. The electrical conductivity dependences on $Po_2$ are found to be ${\sigma}{\propto}Po_2^{1/5.3}$ at 650∼1000$^{\circ}C$ and ${\sigma}{\propto}Po_2^{1/6}$ at 500∼650$^{\circ}C$, respectively, The defect structures are Oi" at 650-1000$^{\circ}C$ and $Vs_m$"' at 500-650$^{\circ}C$. The electron hole is main carrier type, however ionic contribution is found at low temperature portion. Ionic contributions increased with the increasing amount of $ZrO_2$ dopant. In 60mol% $ZrO_2-Sm_2O_3$ system, the conductivity is increased with decreasing oxygen pressure.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.436-444
• /
• 2016

Oil-paper insulation of valve-side windings in converter transformers withstand electrical stresses combining with AC, DC and strong harmonic components. This paper presents the physical mechanisms and experimental researches on partial discharge (PD) of oil-paper insulation at pulsating DC voltage. Theoretical analysis showed that the phase-resolved distributions of PDs generated from different insulated models varied as the increase of the applied voltages following a certain rule. Four artificial insulation defect models were designed to generate PD signals at pulsating DC voltages. Theoretical statements and experimental results show that the PD pulses first appear at the maximum value of the applied pulsating DC voltage, and the resolved PD phase distribution became wider as the applied voltage increased. The PD phase-resolved distributions generated from the different discharge models are also different in the phase-resolved distributions and development progress. It implies that the theoretical analysis is suitable for interpretation of PD at pulsating DC voltage.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.240-242
• /
• 2005

It is well known that the PD (Partial Discharge) signals are generated if insulators have some defects such as voids in electrical facility and various PD detection methods are developed for preventing electrical troubles. So, an interest for the PD signals is higher and higher according to the high concern for the defects detection method of the aging electrical facility. When the equipment to detect PD signals installed at site and it works, a lot of noises flow in the equipment from surrounding situation and it will be mixed with original PD waveform. So we can not get the desired PD waveform. Therefore, there are many trial to reject or suppress the noise from the PD signals from long times ago. The greater of them used the hardware such as bridge circuits and frequency filters to suppress the noise. This paper proposed a novel noise rejection method in acquired data from PD detection equipment. The noise has the irregular phase and higher signal level than real PD, and noise decision is performed after inspection of pulse distribution in ${\Phi}$-q-n graph of acquired data from PD detection equipments. By experimental results on high voltage electric equipments, it is shown that proposed method has good performance. It is expected that this noise rejection technology is useful in numeric calculation and trend management of PD level.

• Journal of Chest Surgery
• /
• v.39 no.6 s.263
• /
• pp.479-481
• /
• 2006

A newborn girl with a partial anomalous pulmonary venous connection, coarctation of the aorta, and ventricular and atrial septal defects underwent a complete repair successfully at 49 days of age. In this case, the left upper pulmonary vein was connected to the left innominate vein via an atypical vertical vein.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1086-1092
• /
• 2015

The off-line and on-line partial discharge (PD) in the stator winding of three high-voltage (HV) motors (1,400 HP, 6.6 kV) is measured and analyzed in this paper. The off-line PD is measured at high values between 24,300 ~ 36,100 pC after 18 years of motor operation. Spare replacement motors were not available for testing the degree of deterioration of the stator windings in standstill status. Therefore, on-line periodic analysis was conducted to monitor the trend of PD after installing a ceramic sensor (110 pF, 6.6 kV) in the terminal box for each phase of each motor. In the stator winding of the No.1 and No.2 HV motors, which showed high magnitudes of off-line PD and low magnitudes of on-line PD, defects are expected to appear in the neutral end of the winding. On the contrary, in the stator windings of the No.3 HV motor, which exhibits high off-line and on-line PD magnitude, defects are expected to appear in the terminal end of the winding where a voltage close to the phase voltage is applied.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.4
• /
• pp.178-182
• /
• 2006

Five model coils of 6.6 kV motor were manufactured with several defects. These stator coils have artificial defects such as void of groundwall insulation, removal of semi-conductive coating and damage of strand insulation. Epoxy-mica coupler(80 pF) was connected to five model coil terminals. The voltage applied to the coils was 3.81 kV, 4.76 kV, 6.0 kV and 6.6 kV, respectively. Partial discharge(PD) tests performed in the laboratory and shield room. Digital PD detector(PDD) and turbine generator analyzer(TGA) were used to measure PD activity. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). The PD levels in pC were measured with PDD. PD patterns of model coils were indicated the internal and slot discharges. PD patterns are consistent with the result of measurement using PDD and TGA instruments. AC breakdown test was performed on five model coils in order to confirm the result of PD measurements. All the failures were located in a line-end coil at the exit from the core slot.