• Steel and Composite Structures
• /
• 제17권5호
• /
• pp.667-686
• /
• 2014

Tapered concrete filled double skin steel tubular (CFDST) columns have been used in China for structures such as electricity transmission towers. In practice, the bearing capacity related to the connection details on the top of the column is not fully understood. In this paper, the experimental behaviour of tapered CFDST stub columns subjected to axial partial compression is reported, sixteen specimens with top endplate and ten specimens without top endplate were tested. The test parameters included: (1) tapered angle, (2) top endplate thickness, and (3) partial compression area ratio. Test results show that the tapered CFDST stub columns under axial partial compression behaved in a ductile manner. The axial partial compressive behaviour and the failure modes of the tapered CFDST stub columns were significantly influenced by the parameters investigated. Finally, a simple formula for predicting the cross-sectional capacity of the tapered CFDST sections under axial partial compression is proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.132-134
• /
• 2004

This paper proposes partial image encryption system for secure transmission of images. Partial image encryption is suitable for real-time processing purpose of multimedia data that needs compression and encryption. Compression part uses modified SPIHT algorithm and encryption part uses AES. Partial image encryption is significant reduction in encryption time in comparison with whole image encryption.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2287-2290
• /
• 2003

In this paper, an image vector quantization method is proposed not only to improve the compression ratio but also to reduce the computation cost. The proposed method could save the computation cost of codebook generation and encoding by using the modified LBG algorithm of Partial Search Partial Distortion (PSPD) in wavelet domain, by which the code book was constructed together with the partial codebook search, the partial code vector elements, and the interruption criterion. We have designed and implemented the vector quantizer to verify the improvement in reducing compression ratio in encoding processing and reducing the computation cost.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
• /
• pp.448-452
• /
• 2004

부분키를 사용한 캐쉬 인식 $B^+$ 트리는 키 압축과 포인터 압축 방법을 동시에 적용한 캐쉬 인식 트리이다. 기존의 캐쉬 인식 트리들은 키 압축과 포인터 압축을 따로 고려하였다. 이에 반해 부분키를 사용한 캐쉬 인식 $B^+$ 트리는 키와 포인터를 동시에 압축하여 캐쉬 활용도를 높였다. 본 논문은 기 발표된 부분키를 사용한 캐쉬 인식 $B^+$ 트리의 벌크로드와 검색 알고리즘을 구현하여 성능 평가를 수행하였다. 그리고 $B^+$-트리와 Simple Prefix $B^+$-트리의 성능비교를 통하여 부분키 캐쉬 인식 $B^+$ 트리의 성능의 우수함을 확인 하였다.

• 한국항해학회지
• /
• 제19권3호
• /
• pp.21-28
• /
• 1995

Mathematical morphology skeleton image processing makes many partial skeleton image planes from an original binary image. And the original binary image can be reconstructed without any distortion by summing the first partial skeleton image plane and each dilated partial skeleton image planes using the same structuring element. Especially compression effects of Elias coding to the morphological globally minimal skeleton(GMS) image, is better than that of PCX and Huffman coding. And then this paper proposes mathematical morphological GMS image processing which can be applied to a binary image transmitting for facimile and big size(bigger than $64{\times}64$ size) bitmap fonts storing in a memory.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.135-149
• /
• 2017

The prediction of the actual ultimate capacity of confined concrete columns requires partial confinement utilization under eccentric loading. This is attributed to the reduction in compression zone compared to columns under pure axial compression. Modern codes and standards are introducing the need to perform extreme event analysis under static loads. There has been a number of studies that focused on the analysis and testing of concentric columns. On the other hand, the augmentation of compressive strength due to partial confinement has not been treated before. The higher eccentricity causes smaller confined concrete region in compression yielding smaller increase in strength of concrete. Accordingly, the ultimate eccentric confined strength is gradually reduced from the fully confined value $f_{cc}$ (at zero eccentricity) to the unconfined value $f^{\prime}_c$ (at infinite eccentricity) as a function of the ratio of compression area to total area of each eccentricity. This approach is used to implement an adaptive Mander model for analyzing eccentrically loaded columns. Generalization of the 3D moment of area approach is implemented based on proportional loading, fiber model and the secant stiffness approach, in an incremental-iterative numerical procedure to achieve the equilibrium path of $P-{\varepsilon}$ and $M-{\varphi}$ response up to failure. This numerical analysis is adapted to assess the confining effect in rectangular columns confined with conventional lateral steel. This analysis is validated against experimental data found in the literature showing good correlation to the partial confinement model while rendering the full confinement treatment unsafe.

• Structural Engineering and Mechanics
• /
• 제63권3호
• /
• pp.385-400
• /
• 2017

This paper presents an experimental study on the behavior of axially-loaded steel RHS (rectangular hollow section) compression members that are partially reinforced along their lengths with welded steel plates. 28 slender column tests were carried out to investigate the effects of the slenderness ratio of the unreinforced member and the ratio of the reinforced length of the member to its entire length. In addition to the slender column tests, 14 stub-column tests were conducted to determine the basic mechanical properties of the test specimens under uniform compression. Test results show that both the compressive strength and stiffness of an RHS member can be increased significantly compared to its unreinforced counterpart even when only the central quarter of the member is reinforced. Based on the limited test data, it can be concluded that partial reinforcement is, in general, more effective in members with larger slenderness ratios. A simple design expression is also proposed to predict the compressive strength of RHS columns partially reinforced along their length with welded steel plates by modifying the provisions of AISC 360-10 to account for the partial reinforcement.

• 인터넷정보학회논문지
• /
• 제10권6호
• /
• pp.219-228
• /
• 2009

멀티미디어의 응용이 날로 빈번해지면서 유효한 데이터에 대한 저장과 전송의 기술에 아주 큰 수요가 나타났다. 많은 압축과 암호화를 결합한 방법들이 제기되어 왔지만 그들은 안전하지 못하거나 계산의 양이 너무 큰 단점이 있고 특히 모바일 기기에서의 무선통신에는 더욱더 부적합할 수밖에 없다. 본 논문에서는 새로운 해결책인 선택적 암호화를 제안한다. 본 논문에서는 quadtree와 zerotree에 기반 한 웨이블릿 압축 기법을 도입하여 압축된 데이터의 일부만을 암호화 하는 방법을 제안하였는데, 압축비율에 영향을 주지 않으면서 계산의 양을 줄임으로서 모바일 장치에서의 데이터 전송을 위하여 시간을 감소시키는 효과를 얻었다. 결론적으로 제안한 선택적 암호화 기법은 속도가 빠르고 안전하며 압축 성능을 감소시키지 않은 방법이라고 할 수 있다.

• 한국연소학회지
• /
• 제17권2호
• /
• pp.24-31
• /
• 2012

Diesel engines exhaust much more NOx(Nitrogen Oxides) and PM(Particulate Matter) than gasoline engines, and it is not easy to reduce both NOx and PM simultaneously because of the trade-off relation between two components. This study investigated flame characteristics of the partial premixed compression ignition known as new combustion method which can reduce NOx and PM simultaneously. The investigation was performed through the analysis of the flame images taken by a high speed camera from the visible engine which is the modified single cylinder diesel engine. The results obtained through this investigation are summarized as follows; (1) The area of the luminous yellow flame was reduced due to the decrease of flame temperature and even distribution of temperature. (2) The darkish yellow flame zone caused by the shortage of the remaining oxygen after the middle stage of combustion was considerably reduced. (3) Since the ignition delay was shortened, the violent combustion did not occur and the combustion duration became shortened.

• 한국대기환경학회지
• /
• 제23권5호
• /
• pp.557-562
• /
• 2007

The purpose of this paper is to investigate the reforming characteristics and maximum operating condition for the hydrogen production by methane reforming using the compression ignition engine induced partial oxidation. An dedicated compression engine used for methane reforming was decided operating range. The partial oxidation reforming was investigated with oxygen enrichment which can improve hydrogen production, compared to general reforming. Parametric screening studies were achieved as $O_2/CH_4$ ratio, total flow rate, and intake temperature. When the variations of $O_2/CH_4$ ratio, total flow rate, and intake temperature were 1.24, 208.4 L/min, and $400^{\circ}C$, respectively, the maximum operating conditions were produced hydrogen and carbon monoxide. Under the condition mentioned above, synthetic gas were $H_2\;22.77{\sim}29.22%,\;CO\;21.11{\sim}23.59%$.