• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.230-233
• /
• 1999

This paper is concerned with the design method of a de-centralized linear control system and its application to vibration control of multi degree of freedom structures. The method is based on the partial model matching on frequency domain by minimizing the relative model error functions between the diagonal elements of the open loop transfer function matrix of the control system and these of the reference model. The method is examined and evaluated by both simulation and experiment of a multi degree of freedom structure(MDFS).

• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.118-127
• /
• 1997

With the trend towards welding automation and robotization, mathematical models for studying the influence of various variables on the weld bead geometry in gas metal arc (GMA) welding process are required. Partial penetration, single-pass bead-on-plate welds using the GMA welding process were fabricated in 12mm mild steel plates employed four different process variables. Experimental results has been designed to investigate the analytical and empirical formulae, and develop mathematical equations for understanding the relationship between process variables and weld bead geometry. The relationships can be usefully employed not only for open loop process control, but also for adaptive control provided that dynamic sensing of process output is performed.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.2
• /
• pp.141-147
• /
• 2009

The fluctuation of physical properties in wood or wood composites is an important subject when the materials in building and construction. Sorption and desorption occur in wood when exposed to the open air, and the temperature distribution in wood can fluctuate as a result of changes in environmental temperature, solar radiation, humidity, and wind velocity. In this study, the temperature difference and fluctuation caused by outdoor environment among different wood species were analyzed using a numerical method. The effect on the process of heat transfer in wood caused by environmental factors was investigated using 1-dimensional partial differential equation with real boundary and initial conditions. The experimental data have been used to check the accuracy of programming code. Through analysis, it was found out that density and moisture content have a negative effect on thermal diffusivity of wood.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.11a
• /
• pp.145-151
• /
• 1999

An Interactive grid generation program(KGRID) with graphical user interface(GUI) has been improved. KGRID works on the UNLX environment and GUI has been implemented with OSF/Motif and X Toolkit and the graphics language is Open GL for visualization of the 3D objects. It supports more convenient user environment to generate 2D and 3D multi-block structured grid systems. It provides various useful field grid generation methods, which are the algebraic methods, the elliptic partial differential equations method and the predictor-corrector method. It also supports 3D surface grid generation with NURBS(Non-Uniform Rational B-Spline) and various stretching functions to control grid points distribution on curves and surfaces. And some menus are added to perform flexible management, for the objects. We generated surface and field grid system about full aircraft configuration using KGRID. The performance and stability of the KGRID is verified through the generation of the grid system about a complex shape.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.5
• /
• pp.498-500
• /
• 2012

Cranioplasty is performed using autograft and allograft materials on patients to whom craniectomy was applied previously due to the facts that, this region is open to trauma and the scalp makes irritation and pressure onto the brain paranchyma causing brain atrophy and convulsions. Dramatical improvement of neurological deficits, control of convulsions and partial prevention of cerebral atrophy are achieved after these operations. One of the most important complications of cranioplasty is late infection. Here, we report a 43-year-old male patient admitted with the history of purulant discharge from the right temporal incission site for one year to whom cranioplasty had been performed with allograft material 20 days after craniectomy which had been performed in 1989. Allograft cranioplasty material was removed and cranioplasty was performed using new allograft material with the diagnosis of late cranioplasty infection.

• Journal of Chest Surgery
• /
• v.27 no.3
• /
• pp.234-237
• /
• 1994

We report a case of double orifice mitral valve complicating a partial atrioventricular septal defect.The preoperative diagnosis was suggested by a characteristic angiographic and echocardiographic findings but the correct diagnosis of double orifice mitral valve itself was proven by open heart surgery. The smaller accessory mitral orifice was located in the left lateral leaflet and was left untouched. The A-V septal defect was closed with Gore-Tex patch and localized tricuspid annuloplasty was done using Gore-Tex tubular graft for correction of severe tricuspid regurgitation. The anterior mitral cleft left intact had mild mitral regurgitation on postoperative echocardiography.Postoperative course was uneventful and the patient was discharged 2 weeks later.

• Journal of Chest Surgery
• /
• v.26 no.10
• /
• pp.749-752
• /
• 1993

The 26 patients were randomly selected among patients who underwent valve replacement from February 1992 through September 1993 at National Medical Center. They were divided into two groups, one control group[n=13], the other aprotinin group[n=13]. The aprotinin group recieved 15000 KIU/kg aprotinin in the CPB priming volume and 35000 KIU/kg aprotinin intravenously during operation. We checked preoperative and postoperative hemoglobin, platelet, prothrombin time, activated partial thromboplastin time, creatinine phosphokinase and lactic dehydrogenase. There was no difference in the patient`s above clinical parameters between both groups. The platelet count in both groups decreaced after operation. These findings demonstrated that the effectiveness of aprotinin was not associated with platelet number but probably associated with a protection of platelet function and a prevention of hyperfibrinolysis. The intraoperative and postoperative blood loss and requirement of blood were significantly reduced in aprotinin group.

• Journal of Chest Surgery
• /
• v.15 no.4
• /
• pp.373-380
• /
• 1982

Experience with intracardiac surgery in infants indicates that for most anomalies the operation and late mortality after primary total correction is lower than the combined mortality after early palliation and delayed correction. In addition, there are secondary benefits of primary total correction in terms of reversal of retarded physical growth and social development and alleviation of parental anxiety. One hundred and fifteen infants under 2 years of age with congenital cardiac anomalies underwent primary surgical intervention at Seoul National University Hospital from Jan. `78 to Sep. `82. There were 70 patients with VSD, 17 patients with TOF, 10 patients with TGA, 4 patients with ASD, 4 patients with TA, 3 patients with TAPVR, and the remainders are Coronary AV Fistula, partial ECD+COA, SV, DORV, PA, Trilogy+PDA. The overall surgical mortality was 18.3%. In acyanotic group 6 patients died among 76 operated patients, and surgical mortality was 6.6%. But in cyanotic group, the mortality was very high as41.0% [16 patients among 39 patients]. This poor surgical result in cyanotic group was due to Improper pre-, intra- and post-operative care, and we are convincing that these factors soon be improved as experiences accumulated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.560-564
• /
• 2004

The optimal design and combustion analysis of the gas generator for Liquid Rocket Engine (LRE) were performed. A fuel-rich gas generator in open cycle turbopump system was designed for 10ton$_{f}$ in thrust with RP-1/Lox propellant. The optimal design was done for maximizing specific impulse of main combustion chamber with constraints of combustion temperature and power matching required by turbopump system. Design variables were selected as total mass flow rate to gas generator, O/F ratio in gas generator, turbine injection angle, partial admission ratio, and turbine rotational speed. Results of optimal design show the dimension of length, diameter, and contraction ratio of gas generator. Also, the combustion test was conducted to evaluate the performance of injector and combustion chamber. And the effect of the turbulence ring was investigated on the mixing enhancement in the chamber.r.

• Structural Engineering and Mechanics
• /
• v.34 no.5
• /
• pp.549-561
• /
• 2010

In this paper, free vibration analyses of a parallel placed twin pipe system simulated by simply supported-simply supported and fixed-fixed Euler-Bernoulli beams resting on Winkler elastic soil are presented. The motion of the system is described by a homogenous set of two partial differential equations, which is solved by a simulation method called the Differential Transform Method (DTM). Free vibrations of an elastically connected twin pipe system are realized by synchronous and asynchronous deflections. The results of the presented theoretical analyses for simply supported Euler-Bernoulli beams are compared with existing ones in open literature and very good agreement is demonstrated.