• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.868-874
• /
• 2007

This paper proposes an efficient partial matching system and representation by using a region-based method for 2D image, and we applied to an extraction of the ROI(Region of Interest) according to its matching score. The matching templates consist of the global pattern and the local one. The global pattern can make it by using region-based relation between center region and its rest regions in an object. And, the local pattern can be obtained appling to the same method as global, except relation between objects. As the templates can be normalized, we use this templates for extraction of ROI with invariant to size and position. And, our system operates only one try to match, due to normalizing of region size. To use our system for searching and examining if it's the ROI by evaluating the matching function, at first, we are searching to find candidate regions with the global template. Then, we try to find the ROI among the candidates, and it works this time by using the local template. We experimented to the binary and the color image respectively, they showed that the proposed system can be used efficiently for representing of the template and the useful applications, such as partially retrievals of 2D image.

• ETRI Journal
• /
• v.46 no.3
• /
• pp.446-460
• /
• 2024

In this paper, we mathematically investigate a downlink non-orthogonal multiple access (NOMA) system for short-packet communications (SPC) in which the near users are used as full-duplex (FD) relays to forward intended signals from the source to a far user. In addition, partial relay selection is employed to enhance the performance of the FD relays under the impact of imperfect interference cancellation. At the far user, selection combining (SC) or maximal ratio combining (MRC) is employed to combine the signals received from the source and the selected FD relay. The analytical expressions for the average block error rate (BLER) of two users over flat Rayleigh fading channels are derived. Furthermore, closed-form asymptotic expressions of the average BLERs at the near and far users in high signal-to-noise ratio (SNR) regimes are obtained. The numerical results show that the analytical BLERs of the near user and far user closely match the simulation results.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.2
• /
• pp.119-130
• /
• 2007

Purpose: This investigation was designed to estimate the flexure strength, density, and microstructure of the colored and uncolored zirconia oxide ceramics for fixed partial denture. Material and Methods: LAVATM All Ceramic(3M-ESPE, USA), Cercon Smart Ceramic(Dentsply, USA), and Z-match Ceramic(DentAim, Korea) were used for this study. All specimen was fabricated by ASTM C1161. After preparing $25{\times}2{\times}1.5mm$ of rectangular column and sitting rectangular column on universal test machine (UTM), external supporting point distance is 20.0 mm, internal supporting point distance is 10.0 mm. Specimen was loaded with 0.2 mm/min of cross head speed until fracture and at the time of broken of specimen, measuring loading value with PC software. Results: The results were obtained as follows: 1. Flexure strength of uncolored zirconia was higher than that of colored zirconia. 2. In uncolored zirconia, flexure strength of LAVATM Ceramic was more higher than the other ceramics, and it showed statistical difference between LAVATM Ceramic and Cercon Smart Ceramic (P<0.05). 3. In colored zirconia, flexure strength of LAVATM Ceramic was more higher than the other ceramics too, but they did not show statistical difference (p>0.05). 4. In Weibull analysis, Characterastic strength was showed highest value to uncolored LAVATM Ceramic and lowest value to Z-match ceramic, and Weibull modulus(m) of uncolored zirconia was higher than that of colored zirconia. 5. In XRD analysis, all group except Z-match showed high peak of t-ZrO2 but they did not show m-ZrO2. Colored zirconia group showed lower peak of t-ZrO2 than that of uncolored zirconia group.

• Journal of the Korean Society of Tobacco Science
• /
• v.35 no.1
• /
• pp.20-27
• /
• 2013

An Electronic Nose(E-Nose) and Gas Chromatography/Mass Spectroscopy (GC/MS) are meanwhile conventional technique to analyze volatile materials in many industries (e.g., food, medicine, environment) and have broad acceptance in the analysis of tobacco products. In this study, an experiment where tin oxide gas sensor array responses and GC/MS profiles are used to characterize the volatile compounds of different cigarettes at the same time is performed and the measurements of two instruments are compared for cigarette samples with a known chemical information. E-Nose and GC/MS were employed to differentiate and match flavored cigarettes with commercial tobacco flavoring agents (lavender, vanilla, peppermint, orange, star anise). For verifying reliability of two systems, the analyses were conducted in terms of amount of flavors in each cigarettes using partial least squares (PLS) and with the principal components analysis (PCA). Various chemical sensors and GC/MS data was reduced into two principal factors (PC1, PC2) for being distinguished with visualized regions. Both systems provided adequate results for odor characteristics of cigarettes in this study with each instrument having its own advantages and disadvantages.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.875-885
• /
• 2010

Recently, the role of Ubiquitous Sensor Network(USN) has been considered to be essential for supporting the near future Network Centric Warfare(NCW) and Tactical Information Communication Network(TICN). In this paper, we explore a set of data storage methods(external storage, local storage and data storage) and query processing methods in WSN. In particular, we focus on analyzing a novel data structure for supporting the local storage method, named the partial ordered tree(POT). The main idea behind POT is that sensor readings are usually correlated with the physical spatial domain. With the help of POT, only a small portion of sensor nodes participate in query processing tasks, and thus network lifetime is greatly increased. Through a series of simulation experiments, we demonstrate that the POT based local storage method clearly outperforms the existing data storage methods in terms of the energy-efficiency, which directly affects the network lifetime, for processing exact match queries, range queries and top-k queries.

• Korean Journal of Cognitive Science
• /
• v.4 no.1
• /
• pp.213-242
• /
• 1993

During the past decades,several automatic indexing systems have been developed such as single term indexing.phrase indexing and thesaurus basedidndexing systems.Among these systems,single term indexing has been known as superior to others despte its simpicity of extracting meaningful terms.On the other hand,thesaurus based one has been conceived as producing low retrival rate ,mainly because thesauri do not usually have enough index terms.so that much of text data fail to be indexed if they do not match with any of index terms in thesauri.This paper develops a thesaurus based indexing system THINS that yields higher retrieval rate than other systems.by doing syntactic analysis of text data and matching them with index terms in thesauri partially.First,the system analyzes the input text syntactically by using the machine translation suystem MATES/EK and extracts noun phrases.After deleting stop words from noun phrases and stemming the remaining ones.it tries to index these with similar index terms in the thesaurus as much as possible. We conduct an experiment with CACM data set that measures the retrieval effectiveness with CACM data set that measures the retrieval effectuvenss of THINS with single term based one under HYKIS-a thesaurus based information retrieval system.It turns out that THINS yields about 10 percent higher precision than single term based one.while shows 8to9 percent lower recall.This retrieval rate shows that THINS improves much better than privious ones that only yields 25 or 30 percent lower precision than single term based one.We also argue that the relatively lower recall is cause by that CRCS-the thesaurus included in CACM datea set is very incomplete one,having only more than one thousand terms,thus THINS is expected to produce much higher rate if it is associated with currently available large thesaurus.

• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.36-41
• /
• 2008

Purpose: For facial reconstruction, skin color match is crucial to achieve great aesthetic result. Forehead flap and full thickness skin graft have been used for many years to reconstruct facial defect. Their results are aesthetically valuable with remarkable resemblance and harmony of the skin color between donor and recipient sites. The purpose of this study is to evaluate and compare the aesthetic outcome of the two methods as the analysis of skin color match. Methods: From January 1995 to December 2005, ten forehead flaps and ten full thickness skin grafts were performed. The reconstructed areas of forehead flaps were five noses and five eyelids. Recipient sites of full thickness skin grafts were seven eyelids, two noses and one forehead. In order to obtain the objective validity, the skin color of flap(or graft) and the recipient sites were measured by chromameter. The skin colors were quantified according to a three-dimensional coordinate system used in chromameter, L*(brightness), a*(redness), and b*(yellowness).Results: There was no significant color difference between forehead flap site and adjacent skin in all color values. On the other hand, the L* and b* values of graft sites were significantly lower than those of the adjacent skins. The a* values of graft sites were higher than those of the adjacent skins. Conclusion: This study reveals that skin color match of forehead flap is greater than that of full thickness skin graft. As forehead flap has adequate volume and great color match, it can be useful to reconstruct deep facial defect such as nasal defect. On the other hand, full thickness skin graft can be used for superficial defect like partial eyelid defect.

• Journal of KIISE:Software and Applications
• /
• v.32 no.12
• /
• pp.1205-1216
• /
• 2005

Component-based Development (CBD) is gaining popularity as an effective reuse technology. Especially commercial-off-the-shelf (COTS) components are mainly for inter-organizational reuse, rather than intra-organizational reuse. One of the essential tasks in CBD is to reuse the right components that provide the functionality and interface required by component consumers. If candidate components provide a limited applicability and customizability, a component consumer cannot reuse the components in application development. To resolve this partial matching problem, we need smart connectors that fill the gap between candidate components and the specification of components required. Previous researches about smart connector describe only connector types to resolve mismatch problems. However, previous researches do not address the identification and design method to resolve the problems. In this paper, we suggest taxonomy of various mismatch problems to identify partial match problems between requirements of the application and components. We identify smart connector types and suggest a systematic process for designing smart connectors using the taxonomy. Therefore, components that have the problems can be used to develop applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.714-717
• /
• 1996

This paper presents a fault detection and diagnosis methodologies based on weighted symptom model and pattern matching between the coming fault propagation trend and the simulated one. At the first step, backward chaining is used to find the possible cause candidates for the faults. The weighted symptom model(WSM) is used to generate those candidates. The weight is determined from dynamic simulation. Using WSMs, the methodology can generate the cause candidates and rank them according to the probability. Secondly, the fault propagation trends identified from the partial or complete sequence of measurements are compared to the standard fault propagation trends stored a priori. A pattern matching algorithm based on a number of triangular episodes is used to effectively match those trends. The standard trends have been generated using dynamic simulation and stored a priori. The proposed methodology has been illustrated using two case studies and showed satisfactory diagnostic resolution.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.443-449
• /
• 1997

LQ-servo design procedure introduced by Athans is a method using a partial states feedback and an output feedback in order to improve the poor performance robustness of the LQR as well as to maintain its stability robustness. Although the method guarantees good stability robustness, it is not effective in performance robustness as it does not match the singular value at low or high frequencies of the transfer matrix obtained by breaking at the plant output. This paper intends propose of a new method, using the limited behaviour of the control gain introduced by Kwakernaak and Sivan, in order to improve it does it refer to controlga introduced by kwakernaak or the new metho Anblguouls.