• Journal of Pharmaceutical Investigation
• /
• v.20 no.2
• /
• pp.55-64
• /
• 1990

Soybean fatty acid, the largest byproduct in the production of soybean oil, was formulated for hand cream, oil in water emulsion base, to improve the suppleness and elasticity of skin. The stability of emulsion observed by a macroscopic method was used as a characteristic index for deciding an optimum formula of hand creams. The optimum formula of the most stable hand cream was obtained from polynomial regression equation, contour graphs and partial derivative graphs. The values of soybean fatty acid and stearyl alcohol in the obtained optimum formula were 9.75 and 14.75 w/w%, respectively, and sodium lauryl sulfate was not needed. Experimental value for the stability of hand cream prepared according to the optimum formula was 76,14 days, and the prediction value by computation method was 73.25 days. From the results of accelerated tests by elevated temperature, the stability of hand cream by optimum formula was 1.7 year at room temperature $(25^{\circ}C)$. The hand cream containing soybean fatty acid was found to be free of primary irritant substance to the skin by Draize technique.

• Geomechanics and Engineering
• /
• v.28 no.6
• /
• pp.559-571
• /
• 2022

Deep soil mixing, DSM technique has been widely used to improve the engineering properties of problematic soils. Due to growing urbanization and the industrial developments, disposal of brick dust poses a big problem and causes environmental problems. This study aims to use brick dust in DSM application in order to minimize the waste in brick industry and to evaluate its effect on the improvement of the geotechnical properties. Three different percentages of cement content: (10, 15 and 20%) were used in the formation of soil-cement mixture. Unlike the other studies in the literature, various percentages of waste brick dust: (10, 20 and 30%) were used as partial replacement of cement in soil-cement mixture. The results indicated that addition of waste brick dust into soil-cement mixture had positive effect on the inherent strength and stiffness of loose sand. Cement replaced by 20% of brick dust gave the best results and reduced the final setting time of cement and resulted in an increase in unconfined compressive strength, modulus of elasticity and resilient modulus of sand mixed with cement and brick dust. The findings were also supported by the microscopic images of the specimens with different percentages of waste brick dust and it was observed that waste brick dust caused an increase in the interlocking between the particles and resulted in an increase in soil strength. Using waste brick dust as a replacement material seems to be promising for improving the geotechnical properties of loose sand.

• Advances in aircraft and spacecraft science
• /
• v.10 no.3
• /
• pp.257-279
• /
• 2023

This manuscript is dedicated to deriving the closed form solutions of free vibration of viscoelastic nanobeam embedded in an elastic medium using nonlocal differential Eringen elasticity theory that not considered before. The kinematic displacements of Euler-Bernoulli and Timoshenko theories are developed to consider the thin nanobeam structure (i.e., zero shear strain/stress) and moderated thick nanobeam (with constant shear strain/stress). To consider the internal damping viscoelastic effect of the structure, Kelvin/Voigt constitutive relation is proposed. The perforation geometry is intended by uniform symmetric squared holes arranged array with equal space. The partial differential equations of motion and boundary conditions of viscoelastic perforated nonlocal nanobeam with elastic foundation are derived by Hamilton principle. Closed form solutions of damped and natural frequencies are evaluated explicitly and verified with prestigious studies. Parametric studies are performed to signify the impact of elastic foundation parameters, viscoelastic coefficients, nanoscale, supporting boundary conditions, and perforation geometry on the dynamic behavior. The closed form solutions can be implemented in the analysis of viscoelastic NEMS/MEMS with perforations and embedded in elastic medium.

• Computers and Concrete
• /
• v.33 no.3
• /
• pp.309-324
• /
• 2024

Internal curing, a widely used method for mitigating early-age shrinkage in concrete, also offers notable advantages for concrete durability. This paper explores the potential of internal curing by partial replacement of sand with fine lightweight aggregate for enhancing the behavior of high-performance concrete at elevated temperatures. Such a technique may prove economical and safe for the construction of skyscrapers, where explosive spalling of high-performance concrete in fire is a potential hazard. To reach this aim, the physico-mechanical features of internally cured high-strength concrete specimens, including mass loss, compressive strength, strain at peak stress, modulus of elasticity, stress-strain curve, toughness, and flexural strength, were investigated under different temperature exposures; and to predict some of these mechanical properties, a number of equations were proposed. Based on the experimental results, an advanced stress-strain model was proposed for internally cured high-performance concrete at different temperature levels, the results of which agreed well with the test data. It was observed that the replacement of 10% of sand with pre-wetted fine lightweight expanded clay aggregate (LECA) not only did not reduce the compressive strength at ambient temperature, but also prevented explosive spalling and could retain 20% of its ambient compressive strength after heating up to 800℃. It was then concluded that internal curing is an excellent method to enhance the performance of high-strength concrete at elevated temperatures.

• The Journal of Fisheries Business Administration
• /
• v.51 no.2
• /
• pp.51-69
• /
• 2020

The purpose of this study is to construct an outlook model that is consistent with the "Fisheries Outlook" monthly published by the Fisheries Outlook Center of the Korea Maritime Institute(KMI). In particular, it was designed as a partial equilibrium model limited to abalone items, but a model was constructed with a dynamic ecological equation model(DEEM) system taking into account biological breeding and shipping time. The results of this study are significant in that they can be used as basic data for model development of various items in the future. In this study, due to the limitation of monthly data, the market equilibrium price was calculated by using the recursive model construction method to be calculated directly as an inverse demand. A model was built in the form of a structural equation model that can explain economic causality rather than a conventional time series analysis model. The research results and implications are as follows. As a result of the estimation of the amount of young seashells planting, it was estimated that the coefficient of the amount of young seashells planting from the previous year was estimated to be 0.82 so that there was no significant difference in the amount of young seashells planting this year and last year. It is also meant to be nurtured for a long time after aquaculture license and limited aquaculture area(edge style) and implantation. The economic factor, the coefficient of price from last year was estimated at 0.47. In the case of breeding quantity, it was estimated that the longer the breeding period, the larger the coefficient of breeding quantity in the previous period. It was analyzed that the impact of shipments on the breeding volume increased. In the case of shipments, the coefficient of production price was estimated unelastically. As the period of rearing increased, the estimation coefficient decreased. Such result indicates that the expected price, which is an economic factor variable and that had less influence on the intention to shipments. In addition, the elasticity of the breeding quantity was estimated more unelastically as the breeding period increased. This is also correlated with the relative coefficient size of the expected price. The abalone supply and demand forecast model developed in this study is significant in that it reduces the prediction error than the existing model using the ecological equation modeling system and the economic causal model. However, there are limitations in establishing a system of simultaneous equations that can be linked to production and consumption between industries and items. This is left as a future research project.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.23-32
• /
• 2009

In this paper an experimental program was launched to determine the mechanical and durability properties of spall repair materials (RCC: 3 items, PCC: 2 items, PC: 3 items). Test items were mechanical property tests such as setting times, strengths, modulus of elasticity, plastic shrinkage, and durability tests such as dynamic modulus ratio, bond property with freeze-thaw, water absorption, chemical resistance, ultraviolet exposure. Modulus of the PC products exhibits ductile while the modulus is in the order of RCC > PCC > PC. At early ages the PC products experience higher plastic shrinkage than others, henceforth stable at 28 days. Other test results such as dynamic modulus ratio, absorption, and chemical resistance show that the PCs are superior to the PCCs and the RCCs. Except for PC-2, all patch materials had bond strength more than 1.3MPa after freeze-thaw cycles of 200~300 while the PCs and the PCCs seem to be better than the RCCs. With 500 hours of ultraviolet exposure, all patch materials showed to have no crack or deterioration at the surface.

• The Journal of the Korean dental association
• /
• v.50 no.8
• /
• pp.474-481
• /
• 2012

The periodontal flap surgery is the most widely utilized surgical procedure to reduce the pocket depth and to access the subgingival root surfaces for scaling and root planing. The diagnosis of the periodontal lesion and the objective of the surgery will dictate the type of flap procedure which will be utilized to obtain the best result. The incisions, type of flap and the selection of suturing design must be planned and executed to fit the problem. Periodontal flaps are designed to preserve gingival integrity and to gain access to root surfaces for residual calculus removal and to thoroughly remove granulation tissue so bone defects can be visualized and treated. Gentle and efficient procedures result in optimum healing and minimal postoperative pain. When flaps need to be repositioned apically or less often, coronally, then the flaps must sit passively at the appropriate level before suturing. To ensure this, buccal and lingual flaps need to be elevated beyond the mucogingival junction so the elasticity of the mucosa allows for flap mobility. Sometimes it may be necessary to extend the flap elevation apically with a split incision approach to minimize the effect of the less elastic periosteum. Vertical incisions can aid in flap positioning by allow ing the clinician to suture the flap at a different level to the adjacent untreated gingiva. In osseous periodontal surgery, flaps are apically positioned to minimize postoperative pocket depth. In regenerative periodontal surgery including implant surgery, soft tissue cove rage of bony defects, graft materials, membranes, and bio logic agents is important so sulcular incisions and light suturing techniques are crucial.

• Journal of Chest Surgery
• /
• v.20 no.1
• /
• pp.1-12
• /
• 1987

Respiratory care with oxygen inhalation is often a necessity to maintain life, and it is one of the important therapeutic adjuncts in respiratory disease and in intensive care after surgery. However, it has been reported that oxygen toxicity occurs after prolonged exposure to 100% 0, [Smith, 1899; Kistler et al. 1967; Schaffner et al. 1967; Rowland and Newman, 1969. Subjective symptoms of oxygen toxicity include tracheal irritation, frequent cough, some burning sensation in the trachea, tachypnea, severe dyspnea, etc. [Welch, 1963; Fisher et al, 1968; Milier et al, 1970; Clark and Lambertsen, 1971; Sackner, 1975]. Pathologic findings are atelectasis, injuries to the pulmonary capillaries and hemorrhage in the alveoli in gross specimens. There can be inflammation, proliferation of fibrin, thickening of alveolar membranes, degeneration of collagen fibers and interstitial edema in the microscopic findings. [Penrod, 1956; Cedergren, 1959; Bean, 1965; Schaffner, 1967]. Dubois and colleagues [1961] found that the amount of pulmonary surfactant was decreased in oxygen toxicity and atelectasis followed by the decreased pulmonary surfactant. Many authors reported that vital capacity, inspiratory force, pulmonary compliance, pulmonary capillary blood flow and pulmonary elasticity were deceased and arteriovenous shunting increased. [Comroe et al, 1945; Fuson et al, 1965; Kistler et al, 1966; Knowles and Blenner-hassett, 1967; Barber et al, 1978]. Many human volunteers were examined after prolonged exposure in a high oxygenated chamber and there were a few reports on animals with oxygen toxicity, subjects including rabbits. Gas partial pressures of alveoli and arteries were measured in rabbits exposed to 100% $O_2$ and the alveolar-arterial gas gradients were analyzed, which is the basis for the study of oxygen toxicity. These rabbits were divided into two groups; rabbits under natural respiration, and second group under artificial respiration with a respirator. The alveolar $PO_2$ [$P]AO_2$] and $PCO_2$ [$PACO_2$], and the arterial $PO_2$ [$PaO_2$] were measured under varying $O_2$ pressures; 15% $O_2$, 21% $O_2$ and 100% $O_2$.

• The Journal of Korean Physical Therapy
• /
• v.9 no.1
• /
• pp.177-184
• /
• 1997

1. The human body is the unification related to the powerful fascial network, I think. 2. Myofascial not only prevent and support the human body structure curdling but also keep the physical balance by dispersing traumatization properly. 3. Myofascial restriction will be developed into muscle deficiency and cause pains without releasing the muscle tension and the spasm. 4. Myofascial restriction affect and change the physical posture by losing the muscle elasticity and flexibility and by losing muscle supporting ability from gravitation. 5. The partial myofascial restriction affect the muscle and the adjoining joint supporting gravitation and cause the unbalance of the entire body.

• Steel and Composite Structures
• /
• v.28 no.5
• /
• pp.589-606
• /
• 2018

The previous studies reflected the significant effect of neutral-axis position and coupling of in-plane and out-of-plane displacements on behavior of functionally graded (FG) nanobeams. In thin FG beam, this coupling can be eliminated by a proper choice of the reference axis. In shear deformable FG nanobeam, not only this coupling can't be eliminated but also the position of neutral-axis is dependent on through-thickness distribution of shear strain. For the first time, in this paper it is avoided to guess a shear strain shape function and the exact shape function and consequently the exact position of neutral axis for arbitrary gradation of higher order nanobeam are obtained. This paper presents new methodology based on differential transform and collocation methods to solve coupled partial differential equations of motion without any simplifications. Using exact position of neutral axis and higher order beam kinematics as well as satisfying equilibrium equations and traction-free conditions without shear correction factor requirement yields to better results in comparison to the previously published results in literature. The classical rule of mixture and Mori-Tanaka homogenization scheme are considered. The Eringen's nonlocal continuum theory is applied to capture the small scale effects. For the first time, the dependency of exact position of neutral axis on length to thickness ratio is investigated. The effects of small scale, length to thickness ratio, Poisson's ratio, inhomogeneity of materials and various end conditions on vibration and buckling of local and nonlocal FG beams are investigated. Moreover, the effect of axial load on natural frequencies of the first modes is examined. After degeneration of the governing equations, the exact new formulas for homogeneous nanobeams are computed.