• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.2
• /
• pp.55-61
• /
• 2013

A field-programmable gate array (FPGA) is an integrated circuit designed to be configured by a customer or a designer after manufacturing. The FPGA configuration is generally specified using a hardware description language (HDL), similar to that used for an application-specific integrated circuit (ASIC) (circuit diagrams were previously used to specify the configuration, as they were for ASICs, but this is increasingly rare). Contemporary FPGAs have large resources of logic gates and RAM blocks to implement complex digital computations. In this paper, we implement a system of digital instrumentation using FPGA. This system consists of the trigger part, memory address controller part, control FSM part, Encoder part, LCD controller part. The hardware implement using FPGA and the verification of the operation is done in a PC simulation. The proposed hardware was mapped into Cyclone III EP2C5Q208 from Altera and used 1,700(40%) of Logic Element (LE). The implemented circuit used 24,576-bit memory element with 6-bit input signal. The result from implementing in hardware (FPGA) could operate stably in 140MHz.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.8
• /
• pp.1083-1090
• /
• 2012

In this paper, we present the section load estimation program of distribution system for smart distribution management system. The proposed program is composed with three parts. One is the consistency check part for switch measurements which consist a section. The consistency check is divided into the current and angle test. For the current test, we examine the input and output power flow for the switch group. For the angle test, the result of power flow calculation at previous step is used. Another is the voltage estimation part for the measured switches. We use the weighted least square (WLS) method for the voltage estimation. The third is the part of final section load calculation. The database structure for accomplishing the developed estimation program is also proposed. To verify the accuracy of the experimental results, case studies are performed using a actual data of Jeju island. The developed program can be effectively applied to the distribution operation systems.

• Journal of Korean Society for Quality Management
• /
• v.36 no.2
• /
• pp.9-19
• /
• 2008

Spare part problem of MIME (Multi Indenture Multi Echelon) system under availability constraint has been studied for several decades. In most of existing studies, it was very difficult to obtain the optimal numbers of spare parts and some approximate methods were proposed under many restrictions. In this paper, we consider a simulation to estimate the total cost rate and system availability and a genetic algorithm to obtain the optimal numbers of spare parts. Some numerical examples are also studied.

• Journal of Korean Society for Quality Management
• /
• v.14 no.2
• /
• pp.21-27
• /
• 1986

This paper deals with a continuous review (s,S) spare part inventory system. The distributions of service life of each part and the replenishment lead time are assumed to be exponential. Assuming that there is never more than a single order outstanding, we obtain the average annual cost of operating the inventory system. If the length of stockout period is small enough to be neglected compared to the length of operating period, the optimal operating policy variables minimizing the cost rate can be calculated iteratively. For the case of one-for-one ordering (that is, s=S-1), an exact cost rate, and a closed form decision rule minimizing the cost rate are obtained for a more general situation in which more than one order is allowed to be outstanding and the distribution of the replenishment lead time is general.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.279-285
• /
• 1999

An integrated sewer management system was developed for the analysis of sewer flow and for optimal operation of sewer works using ArcView and SWMM. SWMM and ArcView were dynamically linked together using Avenue in order to construct user-friendly management system. The developed system was applied to a residential area in Choonchun city to verify its utilities. All the relevant field data were analyzed on the basis of developed system, and the modeling of sewer flow was implemented using RUNOFF, EXTRAN, TRANSPORT in SWMM. This system is now in the process of connection to the management system of watershed and surface environment in order to develope an integrated environmental management system. Futhermore, this system will be a critical part of overall control system of sewer works including sewer line and wastewater treatment plant. As this system can provide comprehensive prediction of flow and pollution profiles, it could serve as a tool not only for optimal management, but also for decision support system to examine the efficiency of planning and implementation of sewer projects.

• IE interfaces
• /
• v.11 no.1
• /
• pp.97-103
• /
• 1998

In these days many people have studied on the berthing problem. The operation rules differ from port so port and the problem is highly dependent on the environment of port. The purpose of this study is to develop a decision support system decision makers of the berthing problem for Inchon Port. The system is developed with graphic user interface(GUI) using user-interactive approach and some general and specific rules for Inchon Prot are considered. The system is composed of the following four parts ; the input/output part, the automatic berthing part by the system using rules, the manual berthing part by user, and the part for modifying results or handling exceptional events. The system is designed to assign ship to berths by matching the characteristics with environmental and operational constraints of Inchon Port. We expect that this system can provide decision makers with an efficient and fast way to berthing and can reduce wastes of time, space, and manpower in port operations.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.5
• /
• pp.35-43
• /
• 2023

Along with the increase in Multi-unit housing defect disputes, the importance of defect management is also increased. However, previous studies have mostly focused on the Multi-unit housing's 'common part'. In addition, there is a lack of research on the system for the 'management office', which is a part of the subject of defect management. These resulted in the lack of defect management capability of the management office and the deterioration of management quality. Therefore, this paper proposes a machine learning-based defect data management system for management offices. The goal is to solve the inconvenience of management by using Optical Character Recognition (OCR) and Natural Language Processing (NLP) modules. This system converts handwritten defect information into online text via OCR. By using the language model, the defect information is regenerated along with the form specified by the user. Eventually, the generated text is stored in a database and statistical analysis is performed. Through this chain of system, management office is expected to improve its defect management capabilities and support decision-making.

• Journal of Korean Society of Archives and Records Management
• /
• v.16 no.4
• /
• pp.121-148
• /
• 2016

MSR identifies that records are key factors in achieving the goals of an organization and that records management is part of the business administration. Therefore, organizations could secure accountability and continuity of works through the activities of production and management records. This study explored what should be prepared to adopt MSR in public institutions based on the analysis of the requirements of the ISO 30301. which is prepared to be utilized as a certificate system. It focuses on 1) how laws could be supplemented to adopt MSR by comparing the requirements of MSR and the Public Records Management Act; 2) what should be prepared by organizations in terms of their rules and procedures; and 3) how the evaluation system of public institutions and the records management evaluation system could be revised to ensure that MSR will be sufficiently implemented in the organizations. In conclusion, the part to be supplemented by the law, the area to be operated as the internal rules of the organizations, and the way to be reflected in the evaluation of the public institutions were suggested.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.05a
• /
• pp.383-400
• /
• 2004

Knowledge management is an essential part for gaining competitive advantage. The knowledge management system deals with information gathering, process, and implementation for the organizational performance advantage. The study integrates knowledge management in view of an internal organizational information processing structure and external strategic issue management system. This means that the coordination between internal systematic process and external scanning mechanism is essential for organizational success.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.55-60
• /
• 2014

Today, there is increasing the elderly population in rural community, and people of returning from the urban to the rural community are demand to be of high value-added agriculture. In this time, there are required to regularization, standardization, automation, for getting of production of high value crops. In this paper, we are study for automation cultivation control system design for produce high-value crops. this system were designed of two parts that one part is measure and control unit, another part is server part for database and server side control. the main controller for measurement and control is used MC9S08AW60, server for Database and server-side control was using MySQL with CentOS. The source code of control program was coding C and compile with GCC. the functions of measurement and control unit are digital input and output each 8channels and can be scan-able of 20 Bit with 2CH/Sec. Analog Output were designed that can be output of 4-20mA or 0-5V on 4channel. The Digital input and output part were designed 8-channel, and using the high speed photo coupler and relays. We showed that system is possible to measure a 20bit data width, 2Ch/sec as 8 channel analog signals.