• Journal of the Korean Society for Library and Information Science
• /
• v.41 no.4
• /
• pp.113-134
• /
• 2007

This study deals with the role and responsibility of university library in multicultural society. For this purpose, centered the Chinese students in Pusan University, with internet questionnaire surveys on customer satisfaction to the current library portal service and set up a effective digital library evaluation model. In the meanwhile we borrowed evaluation methods and items from LibQUAL+ in part, a world wide famous model, and use Tsinghua University Library's evaluation statistic norms. To summarize the results of this survey, Chinese student's service satisfaction about Pusan University library is still fairly low. Undergraduate and graduate students(including doctor courses) group follows, undergraduates student's satisfaction level is lower than graduate. By analyzing simple satisfaction we can know that library portal service maintained low importance or influence to the user, to internet space user's satisfaction is a relatively high level. And compared with other dimension, statistic data show out that internet space user's satisfaction still maintained a relative high level.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.1-9
• /
• 2010

Pile reinforcement systems with enlarged upper section are newly introduced by using a mechanism that most of horizontal forces are resisted in the upper part of the pile. The new systems are expected to be effectively applicable to the marine structures including port and harbor facilities. In this study, three different reinforcement methods such as bucket pile type, top base pile type, and grouting reinforcement type were utilized in the 3-D. numerical simulations. The parametric study deals with the effects of various factors including soil types and stratigraphy, reinforcement methods, type and dimension of the pile on the lateral behaviors of the pile. The results show that the reinforcement method with bucket pile is the most efficient one compared to the top base pile type and grouting reinforcement type.

• Imaging Science in Dentistry
• /
• v.42 no.2
• /
• pp.83-88
• /
• 2012

Purpose : The aim of this study was to investigate the initial effects of maxillary expansion therapy with Hyrax appliance and to evaluate the related changes in maxillary sinus volume. Materials and Methods : Thirty patients (20 females, 10 males; 13.8 years) requiring maxillary expansion therapy, as part of their comprehensive orthodontic treatment, were examined. Each patient had cone-beam computed tomography (CBCT) images taken before (T1) and after (T2) maxillary expansion therapy with a banded Hyrax appliance. Multiplanar slices were used to measure linear dimensions and palatal vault angle. Volumetric analysis was used to measure maxillary sinus volumes. Student t tests were used to compare the pre- and post-treatment measurements. Additionally, differences between two age groups were compared with Mann-Whitney U test. The level of significance was set at p=0.05. Results : Comparison of pre-treatment to post-treatment variables revealed significant changes in the transverse dimension related to both maxillary skeletal and dental structures and palatal vault angle, resulting in a widened palatal vault (p<0.05). Hard palate showed no significant movement in the vertical and anteroposterior planes. Nasal cavity width increased on a mean value of 0.93mm(SD=0.23, p<0.05). Maxillary sinus volume remained virtually stable. No significant age differences were observed in the sample. Conclusion : Hyrax expansion therapy did not have a significant impact on maxillary sinus volume.

• Physical Therapy Korea
• /
• v.27 no.3
• /
• pp.212-219
• /
• 2020

Background: Although the original version of the health-related quality of life (HRQOL) questionnaires are found to be acceptable, the cross-culturally adapted versions may not be comparable to their original version. Objects: To examine dimensionality and construct validity of two Korean versions of the brief version of the World Health Organization Quality of Life (WHOQOL-BREF) and EuroQOL-5 dimension (EQ-5D) questionnaires. Methods: A total of 77 cancer survivors undergoing palliative rehabilitation programs from two rehabilitation institutes was recruited from April 16, 2018 to June 26, 2019. The WHOQOL-BREF and the EQ-5D were filled out by the various cancer survivors following a particular session of rehabilitation programs. The scores were analyzed with Winsteps Rasch analysis computer program using the rating scale model. Rasch fit statistics were used to determine the dimensionality and the item difficulty calibrations of WHOQOL-BREF and EQ-5D. Results: All items except two, negative feeling, need treatment function and pain prevent activity (mean square [MnSq] = 2.42, 1.82 and 2.51, respectively), were found to be acceptable, while two items of the EQ-5D, anxiety/depression and self-care, were misfit (infit MnSq = 1.65 and 0.38, respectively). Item difficulty calibrations of WHOQOL-BREF match person ability measures (i.e., HRQOL) fairly well. However, the person ability distribution showed obvious ceiling effects for EQ-5D. All items of EQ-5D were appeared to be less challenged in comparison with those of WHOQOL-BREF. Conclusion: Item-level analysis using the Rasch model supports the quality of culturally adapted items used to measure the HRQOL one exception; that is, whether or not to include misfit items as part of the HRQOL measurements. Additionally, cancer survivors undergoing palliative rehabilitation programs appear to have more of a tendency to view the EQ-5D items as being more challenging than the WHOQOL-BREF.

• The KIPS Transactions:PartD
• /
• v.10D no.6
• /
• pp.927-934
• /
• 2003

Database query optimates the selectivety of a query to find the most efficient access plan. Multi-dimensional selectivity estimation technique is required for a query with multiple attributes because the attributes are not independent each other. Histogram is practically used in most commercial database products because it approximates data distributions with small overhead and small error rates. However, histogram is inadequate for a query with multiple attributes because it incurs high storage overhead and high error rates. In this paper, we propose a novel method for multi-dimentional selectivity estimation. Compressed information from a large number of small-sized histogram buckets is maintained using the discrete cosine transform. This enables low error rates and low storage overheads even in high dimensions. Extensive experimental results show adventages of the proposed approach.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.3
• /
• pp.9-18
• /
• 2007

The small and medium sized dams have the fill dam type of a lot of occasions, which are often weak in cases of major floods. For this reason, although a countermeasure is in great need, due to the importance of the facilities and financial situations, no direct safety measures have been taken. In this study, in order to minimize construction expenditure for practical safety measures in cases of major floods, the overflow section of spillway has been analyzed focusing on how the overflow capacity will increase in the case of partially rebuilding a part of the overflow section of spillway favorable for hydraulic conditions. The labyrinth weir and movable weir was chosen for reconstruction models of the overflow section. Moreover, for analyzing the after-effects of the reconstruction, a small scale dam was temporarily chosen for various experiments such as the hydraulic model testing and the three dimension numerical evaluation through the use of Flow-3D.

• Journal of Powder Materials
• /
• v.11 no.5
• /
• pp.412-420
• /
• 2004

The purpose of the present study is to determine an optimum composition using cheaper powders keeping with high performance of hard rock cutting diamond saw blade. With 50Fe-20(Cu . Sn)-30Co specimen, a part of Co was replaced by Ni(5%, 10%, and 15%, respectively). These specimens were hot pressed and sintered for predetermined time at various temperature. Sintering is performed by two different methods of temperature controlled method and specimen dimension controlled method. In order to determine the property of the sintered diamond saw blade, 3 point bending tester, X-ray diffractometer, and SEM were used. As the Co in the bond alloy was replaced by Ni, the hardness of the specimen increased. Thus the 50Fe-20(CuㆍSn)-15Co-15Ni specimen showed the maximum hardness of 104(HRB). The results of 3 point bending test showed that flexure strength decreased along with increase in Ni content. This is attributed to the formation of intermetallic compound(Ni$_{x}$Sn) determined by X-ray diffraction. The fracture surface after 3 point bending test showed that diamond was fractured in the specimen containing 0%, 5%, and 10%Ni, and the fracture occurred at the interface between diamond and matrix in the specimen containing 15%Ni. The cutting ability test showed that the abrasive property was not changed in the specimen containing 0%, 5%, and 10%Ni. The optimum composition determined in this study is 50Fe-20(CuㆍSn)-20Co-10Ni.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.10-20
• /
• 2017

The proportion of software in the automotive industry is steadily increasing due to the rapid technological development of automobile E/E parts. Because the automotive E/E technology is now on the basis of intelligent automobile and advanced safety automobile technology. The purpose of this study is to investigate the effect of organizational capability (organizational resource capability and management capability), process capability (process capability, customer Requirement management capability), performance dimension (motivation, participation level). In this study, we conducted questionnaires and statistical analysis on engineers (members of the Korea Advanced Automotive Technology Association) who perform research and development activities in the R&D organization of the automotive E/E part in South Korea. ANOVA is applied for the verification of the difference in performance measured by organizational capability, process maturity, and motivation participation level according to company characteristics (level of processing : supply chain configuration, annual sales, total SW development ratio). According to the results of this study, in order to improve the performance of ASPICE or ISO 26262-related consulting project, a different consulting approach strategy considering the characteristics of organization and personnel is needed. In summary, the analysis results for the three main treatment levels are as follows. The difference in organizational capacity, process capability and performance was found to be statistically significant according to supply chain configuration and annual sales, but it was found that the difference of response according to the proportion of total SW was not significant.

• Journal of Technologic Dentistry
• /
• v.12 no.1
• /
• pp.23-45
• /
• 1990

This study aimed at inquiring into the basic theory on co-operative education, grasping and analyzing the present situation of the junior health college, the present condition of co-operative education and into problem. and seeking to find a solution to activate the co-operative edcation of the junior health colleges. For this purpose this study compared the co-operative education system in our country with that of foreign countries revolving around the related literature to co-operative education, analyzed it, and the pointed out its problem. And this study classified into the solution of establishing co-operative education system, the solution of consolidating the on-the-spot training system, the solution to activate the co-operative education of the junior health college. First this study suggested three methods as a part of establishing co-operative education system as below. 1. The need to set up the ideology concerning co-operative education. 2. The construction of the advisory committee for co-operative education. 3. The establishment of an agency for co-operative education. And this study suggested nine methods as the method of consolidating the on-the-spot training as below. 1. The execution of the basic research for the on-the-spot training. 2. The reorganization of the existing curriculum into the curriculum the industrial organization requires. 3. The establishing of the system in a closer cooperation with the industrial organization for the on-the-spot training. 4. The participation in solving commonly the problems of the industrial organization and in education. 5. The establishing of the guidance system assuming exclusive charge of the on-the-spot training. 6. The submission of the evaluation sheet for the on-the-spot training. 7. The extension of the period of the on-the-spot training and the reorganization of an educational system. 8. The persistent support for the on-the-spot training at the governmental dimension. 9. The securing of the educational dost spent on the on-the-spot training and the imposition of benefits on the industrial organization.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.17-20
• /
• 2008

As a part of a research program to study the shear reinforcement of flat plate system, this investigation aimed to determine the effect of shear reinforcement type on punching shear strength of monolithic slab-column connection. A total of 5 specimens were fabrication and tested. The dimension of the slab were $2.63{\ast}2.725{\ast}0.18m$, with a centrally located column $0.6{\ast}0.8m$ in cross section. Experimental results showed that the CFS shear reinforcement was not effective because of lack of proper bond with concrete. 3 shear reinforcement except of CFS showed high effectiveness, which resulted in a considerable increment of the punching shear resistance of the connection.