• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.417-422
• /
• 1998

he Reactor Coolant Gas Vent System(RCGVS) design for Ulchin Nuclear Power Plant Units 3&4(UCN 3&4) has been improved from the Yonggwang Nuclear Power Plant Units 3&4(YGN 3&4) based on the evaluation results for depressurization capability tests performed at YGN 3&4. There has been a series of plant safety analyses for Natural Circulation Cooldown(NCC) event and thermo-dynamic analyses with RELAP5 code for the steam blowdown Phenomena in order to optimize the orifice size of UCN 3&4 RCGVS. Baesd on these analyses results, the RCGVS orifice size for UCN 3&4 has been reduced to 9/32 inch from the l1/32 inch for YGN 3&4. The depressurization capability tests, which were performed at UCN 3 in order to verify the FSAR NCC analysis results, show that the RCGVS depressurization rates are being within the acceptable ranges. Therefore, it is concluded that the orificed flow path of UCN 3&4 RCGVS is adequately designed, and can provide the safety-grade depressurization capability required for a safe plant operation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.242-242
• /
• 2013

현재 크라이오펌프의 주요 관심기술은 생산성 향상을 위한 급속 재생기술의 확보와 극저온 냉동기의 효율 향상 기술 및 저진동 기술의 확보이다. 크라이오펌프는 크게 냉동기 모듈과 펌프모듈로 구성되고, 냉동기 모듈은 주로 G-M 극저온 냉동기, Stirling 극저온 냉동기 또는 맥동관 극저온 냉동기 등을 사용하는데, 이것은 주로 압축기, 왕복기, 재생기, 구동장치 등으로 펌프모듈은 cryoarray와 펌프 body로 구성된다. 최근에 구조가 간단하고 장수명 및 저진동의 장점을 가진 맥동관 극저온 냉동기의 효율이 급속히 증가함에 따라 초전도, 액화 등의 분야에서 기존의 G-M 극저온 냉동기를 대체하는 추세이다. 본 연구에서는 지식경제부 제조기반산업원 천기술사업 "급속재생형 저진동 크라이오펌프 개발" 사업을 통해 급속 재생, 저진동, 고신뢰성 확보를 위해 기존의 G-M 극저온 냉동기를 맥동관 극저온 냉동기로 대체 적용 개발 및 국산화를 도모하고자 한다. 또한 상용화에 따른 공정 개발을 소개하고자 한다.

• Biomolecules & Therapeutics
• /
• v.5 no.1
• /
• pp.48-52
• /
• 1997

The antigenic potential of CFA-001, cefazolin, a cephalosporin derivative produced by an enzy-matic semisynthesis, was determined in Hartley guinea pigs. A battery of tests employed consisted of active systemic anaphylaxis (ASA), passive cutaneous anaphylaxis (PCA), and indirect hemagglutination test (IHA). The results were as follows: 1) In ASA, no signs attributable to anaphylaxis was observed in guinea pigs sensitized with CFA-001, whereas OVA-sensitized animals induced severe anaphylactic symptoms; 2) guinea pigs did not produce antibodies against CFA-001 when sensitized with or without Freund's complete adjuvant (FCA) in homologous PCA tests. Meanwhile, antibodies against ovalbumin (OVA) were clearly detected; 3) No CFA-001-specific hemagglutination was observed in the IHA using sera obtained from CFA-001- sensitized guinea pigs. These results suggest that CFA-001 has no antigenicity potential in guinea pigs.

• Korean Journal of Veterinary Research
• /
• v.48 no.1
• /
• pp.93-98
• /
• 2008

A 6-year-old female Boston terrier dog was presented with seizure episode, forelimb paraparesis, excessive panting, and ataxia. On physical and neurological examination, episcleral vessel engorgement, delayed postural reaction, delayed pupillary light reflex (both direct and consensual), and crossed forelimb were noted. Serum biochemical profiles were not remarkable other than mildly elevated hepatic enzymes. On cerebrospinal fluid analysis, elevated protein concentration was observed. In magnetic resonance imaging scans, the left frontal brain lesion with ring enhancement strongly suggested the presence of intracranial tumor. Concurrently, secondary hydrocephalus and syringomyelia were also observed. The dog was euthanized at 4 months after initial presentation because of aggravated neurological signs. This case was definitely diagnosed as an intracranial anaplastic oligodendroglioma based on postmortem histopathologic examination.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.140-153
• /
• 2005

During the tunnel construction the major failure mode can be categorized as: tunnel failure just after the tunnel excavation without support, failure after application of shotcrete and finally failure after setting the concrete lining. The failure mode just after the tunnel excavation without support, can be further classified as : bench failure, crown failure, face failure, full face failure, failure due to weak strata and failure due to overburden. Moreover the failure after application of shotcrete is classified as heading face failure, settlement of shotcrete support, local failure of shotcrete lining and invert shotcrete. To find out the major causes of tunnel collapse, the investigation was done in case of the second phase of Seoul subway construction. The investigation results depicted that the major causes of tunnel collapse were due to the weak layer of rock/fault and sudden influx of ground water from the tunnel crown. While the investigation results of the mountain road tunnels construction have shown that the major causes of tunnel failure were inadequate analysis of tunnel face mapping results, intersection of faults and limestone cavities. In this paper some recent measurement in order to mitigate such tunnel collapse are presented

• Journal of Microbiology and Biotechnology
• /
• v.16 no.6
• /
• pp.974-978
• /
• 2006

The cytochrome P450 monooxygenase from the pikromycin biosynthetic gene cluster in Streptomyces venezuelae, known as PikC, was observed to hydroxylate the unnatural substrate indole to indigo. Furthermore, the site-directed mutagenesis of PikC monooxygenase led to the mutant enzyme F171Q, in which Phe171 was altered to Gln, with enhanced activity for the hydroxylation of indole. From enzyme kinetic studies, F171Q showed an approximately five-fold higher catalytic efficiency compared with the wild-type PikC. Therefore, these results demonstrate the promising application of P450s originating from Streptomyces, normally involved in polyketide biosynthesis, to generate a diverse array of other industrially useful compounds.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.120.1-120.1
• /
• 2014

Fast-steering Secondary Mirror prototype (FSMP) of the Giant Magellan Telescope (GMT) has been developed by the consortium consisting of institutes in Korea and the US. In 2014 we are finalizing the FSMP project as combining two sub-systems, the mirror fabricated by Korea Research Institute of Standards and Science (KRISS) and the mirror cell with tip-tilt controlling system developed by Institute for Advanced Engineering (IAE), in the KRISS facility. In the assembly process we will identify potential difficulties or problems for the process, such that this process can be reflected to the further development of the FSM for GMT. In the presentation, we present how the assembly process can be carried out in safety.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.1
• /
• pp.33-38
• /
• 2005

Recently, lasers have become widely used throughout the medical treatment field. Several types of lasers have been used for the purpose of hair removal since the Alexandrite laser was approved by the FDA (Food & Drug Administration) for clinical epilation. In this study, a long-pulsed Alexandrite laser system for hair removal adopting a multi-discharge method in which three flash lamps are turned on consecutively was designed and fabricated. This laser system shows the technology that makes it possible to create extended pulse by turning on three flash lamps consecutively. With this technique, the pulse width can be varied from 4ms∼10ms. Then using this Alexandrite laser system with the pulse width 10ms and the beam size 7mm, hair removal was performed on the back portion of a human hand and leg. This study shows that treatment by the long-pulsed Alexandrite laser produces hair removal with no relevant side effects.

• Proceedings of the Korean Society of Veterinary Clinics Conference
• /
• 2008.05a
• /
• pp.101-101
• /
• 2008

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.881-888
• /
• 2007

In order to investigate the characteristics of the non-biodegradable material, the $BOD_5/COD_{Cr}$ ratio was used. The average ratio of industrial complex's influent wastewater was 2.29~2.96, the effluent ratio was 4.29~19.0. The removal efficiency of $UV_{254}$ by physicochemical treatment was 22.8~94.7% and 5.3~77.2% by biological treatment, respectively. Of the wastewater removal efficiency for each of the items, the $BOD_5$ treatment efficiency was the greatest at 97.3% and the color & TN treatment efficiency was 40~70%. The study of the economical assessment showed that the complex as well as the individual companies spent 722~1,298 won for each ton of treated wastewater. All of the wastewater treatment facilities spent the most money on chemicals needed to treat the wastewater. The total cost for Nylon manufacturing wastewater treatment plant was the greatest while the total cost for cotton manufacturing wastewater treatment plant turned out to the lowest. As respects of removal efficiency and economocal assessment, Polyester A and Cotton manufacturing wastewater treatment plants were better effective than a dyeing industrial complex wastewater treatment plant.