• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.321-322
• /
• 2002

This paper presents study of effects of cutting parameters such as cutting speed, feed rate and depth of cut on the surface roughness in hard turning. Taguchi Method and linear regression model of design parameters were utilized to identify the controlling process parameters that can monitor the surface roughness in the hard turning operation. In the process optimization, experimental planning was performed using the orthogonal array and concept of the signal-to-noise ratio. Cutting parameters such as speed, feed rate, and depth of cut were selected as process parameters and the ANOVA analysis showed that feed rate and cutting speed had more effect on the roughness variation that depth of cut.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.63-69
• /
• 2011

To propose the evaluation criteria of substantial sustainable low-carbon long-life housing, this study subdivided an existing planning item composed of the simple enumeration type by coding system of high/middle/low classification according to the core technology, and it was subdivided by a total 203 piece item. In other words, it subdivided 4 divisions by apartment unit, building, park and equipment, and classified elemental technology and system were divided by passive/active elemental technology and system according to the design process of long-life housing. Besides that, this paper presents the restructure results of checklist with quantitative criteria that classified by the weighting factor and compatibility between law system and current planning criteria in domestic long-life housing.

• 설비공학논문집
• /
• 제16권11호
• /
• pp.1060-1067
• /
• 2004

To apply an analysis method of life cycle cost when assessing economics of equipment system, we should basically set up preconditions such as useful life, price escalation rate, interest rate, etc. as well as consider a calculation algorism of source energy and heat source system, which is a complex process for life cycle costing. For this reason, equipment designers tend to plan heat source systems, without a thorough investigation on economics of alternative systems at the pre-design phase. In this process, architectural designers should adopt a proper heat source system, which is one of the most important factors for planning an appropriate architectural design, through a discussion with equipment designers in a short time. In order to offer an evaluation method for equipment designers to analyze economics of an alternative heat source system easily at the pre-design phase, this research would define the simplified economics, evaluation method through analysis of existing papers for economics evaluation, and examine validity through comparison of simplified method values ($LCC_{EC}$) and life cycle costing values ($LCC_{15}$) for six alternative heat source systems.

• 한국건설관리학회논문집
• /
• 제9권2호
• /
• pp.170-181
• /
• 2008

건설 프로젝트는 생산과정 이전에 설계도면을 바탕으로 예상되는 비용이 산정되며, 기획단계는 소요예산을 책정하고 설계단계는 예산에 합당한 효율적 대안을 찾으며, 정확한 입찰금액을 예측하기 위해 수차례 이루어진다. 특히, 물량산출 이전까지 예측되는 공사비의 정확도와 신뢰도는 매우 중요하다. 그러나, 국내의 경우 면적당 단가 방식 공사비 예측을 벗어나지 못할 뿐 아니라, 단계별 예측방법, 프로세스, 데이터 분석 및 관리기술 등이 표준화되어 체계적이고 종합적으로 관리되지 못하고 있다. 이에 국내 공사비 예측기술 및 관리기술 발전을 위하여 첫째, 표준화된 공사비 데이터베이스 구축과 국가차원의 종합적 관리가 필요하며, 구축 방법으로 다차원 공사비 데이터베이스 개념모델 CUBE를 제시하였다. 둘째 단계별 공사비 예측의 목적에 맞는 코스트 모델 적용이 필요하며, 코스트 모델의 방법론을 기획단계와 설계단계로 구분하여 제시하였다. 셋째, 이러한 두 가지 코스트 모델을 적용한 코스트 플래닝 프로세스를 제시하였고, 넷째, 공사비 예측 및 관리 전문인력 양성의 필요성을 제시하였다.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.87-94
• /
• 2010

In this paper, a new simulator of the biped robot for planning walking patterns was showed. And this simulator(MHBiped) is able to not only visualize the plan of patterns but also verify whether a biped robot design is suitable. In addition, MHBipd can modify various kinds of walking parameters and the trajectory of biped robot. Therefore, a new biped robot can be designed easily by the this simulator before you apply to a robot. As a result, a well-balanced parameters of walking patterns watching the movement of CG and ZMP can be obtained. Walking patterns should be changed according to both the existence of obstacles and conditions of ground and it can be described by the trajectory of hip and ankles. All those trajectorys can be also obtained by the cubic spline functions and the way of modeling walking patterns. The results of simulator, the movement function of CG and ZMP, the cubic spline functions and modeling of biped robot were introduced in this paper. And the effectiveness of this simulator was confirmed by the simulations.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.638-645
• /
• 2016

본 연구는 교통부문 탄소배출 저감을 위한 토지이용계획 기법을 개발하고 그 효과를 정량적으로 검증하는데 목적이 있다. 본 연구는 선행연구를 통해 토지이용계획 단계에서 적용할 수 있는 탄소저감 설계요소로 외곽고밀개발, 용도복합을 통한 차량 이동거리 최소화, 보행네트워크 구축, 커뮤니티 회랑을 도출하고 아산 탕정지구에 적용하여 탄소저감 측면에서 개선된 토지이용계획안을 제시하였다. 교통부문 탄소저감 효과를 추정하기 위해서는 VISUM 프로그램을 이용하였다. 분석결과 교통부문 탄소배출량은 약 17.7% 줄어드는 것으로 나타났으며, 탄소저감량은 약 450.7tCO2/yr로 나타났다.

• Human Ecology Research
• /
• 제58권4호
• /
• pp.539-560
• /
• 2020

This study presents work-family multiple-role planning by female university students as a new approach to worklife balance. Accordingly, this study examines university years as a key time frame during which students establish their career paths. This study integrates the social cognitive career theory and the planned behavior theory to design and evaluate a model that explains the work-family multiple-role planning process; in addition, it develops an optimal model to predict the intentions of female university students in work-family multiple-role planning. This study has conducted a structural survey with 500 female university students. After inspecting the data, the responses of 435 participants were used in the data analysis (SEM) with SPSS 21.0 and AMOS 21.0. The findings include the following. First, suitability of predictive model presents a satisfying fit. The major factors in this study's model (parental support, subjective norms, attitudes toward multiple-role planning, career decision self-efficacy, and outcome expectations) are verified as direct and indirect predictors of the work-family multiple-role planning intent of female university students. Second, the strongest predictive factor for the work-family multiple-role planning intent is the social environment factor (subjective norms), indicating that the influence of social pressure on intent is relatively large. The predictive model formulated under this study's integrated theoretical framework supplements existing research that focused on attitudes toward multiple-role planning as well as provides a more profound theoretical foundation on which work-family multiple-role planning behaviors can be better understood.

• 한국BIM학회 논문집
• /
• 제7권3호
• /
• pp.1-10
• /
• 2017

3D concrete printing technology builds structural components layer-by-layer with concrete extruded through a nozzle without using forms. This technology can simplify construction processes by optimizing design flexibility, construction time, and cost. Furthermore, the 3D printing technology is easy to make an irregularly shaped and function embedded building(or object) which is difficult to be constructed by conventional construction method. However, the 3D printing concrete is not suitable for current commercial standard and the material itself. It is also difficult to apply it to the construction site due to the lack of initial strength and the nozzle which is clogged during the process. The research of mix proportion design process for 3D printing concrete which differs from the conventional concrete is necessary in order to solve the problems. This paper aims to calculate the 3D printing concrete mix proportion design process based on the mix materials and performance information derived from the previous researches. Therefore, the usage variation range, mutual influence relationship, and the importance priority of the mix proportion are analyzed. Based on this results, the basic design process of 3D printing concrete which contains planning design phase, basic design phase and validating performance phase is suggested. We anticipate to confirm applicability verification about the actual production by referring to this 3D printing concrete mix proportion study. In the future, this study can be utilized for blueprint of the 3D printing concrete mix proportion.

• 대한건축학회논문집:계획계
• /
• 제34권3호
• /
• pp.35-44
• /
• 2018

The purpose of this study is to elucidate the formation process and spatial characteristics of the first and largest open port of Foreign Settlement in Yokohama, Japan. Based on the reference records and maps, we traced the process of modernization, example of opening the park and introduction of technology, industrial & infra-structural facilities. And found out the characteristics of formation process of port city Yokohama as the modernized city. The results of this study are as follows: First, the spatial characteristics and significance of the public space of the port open space; second, the difference of the road and parcel systems between the Japanese and the foreign settlements; and third, the meaning of the port open space as the space of separation in that times. These experiences about the open port in Yokohama could be worked as the basic for domestic and colonial city planning.

• The International Journal of Costume Culture
• /
• 제3권3호
• /
• pp.201-211
• /
• 2000

The purpose of this study is to pinpoint currently arising issues concerning cyber fashion mall by analysing present status and contents of its web design, management and planning within the limits o business to customer (B2C) commerce, and to suggest a direction for building an ideal fashion mall on the internet. As for the study method, conceptual definitions were given based on previous studies. And a positive study was implemented, in which the cases of 23 chosen cyber fashion malls among 60 or so domestic and foreign malls selling fashion products were found by internet search engines and analysed. Results of the case analysis of cyber fashion malls are as follows : 1) cybermall must provide customers with an integrated service as well as e-commerce. 2) various products assortment and price differentiation must be developed, 3) the techniques of graphics, coloring and texturing, and layout design must be adopted to process and express product information, 4) the legislative system is needed to deal with the security, and 5) design and management of customer oriented interface are needed to process and express product information matter of electronic payment and customer protection. Considering the issues in internet fashion cybermalls, are suggested the important factors that are necessary or web design, planning and management to build an ideal cyber fashion mall. These results will contribute to the development of fashion e-commerce.