• 한국전산구조공학회논문집
• /
• 제15권4호
• /
• pp.591-598
• /
• 2002

공학적 설계에 있어 많은 문제들은 몇 가지 목적함수들을 동시에 최소화하여야 할 필요가 있을 경우가 있다. 선박설계에 있어, 종래에는 자재비 경감과 재화중량 증가를 위해 최소중량설계가 구조 설계의 주된 목적이었으나, 값싼 노동력을 내세운 후발 조선국과의 치열한 국제 경쟁을 극복하기 위해서는 보다 경제성 있는 선박 건조 기술 개발이 선행되어야 할 것이다. 이에 따라 본 연구에서는 다목적함수 최적화기법을 이용한 선체 구조의 보다 합리적인 설계 방안에 대한 연구를 수행하여 실제 건조된 유조선을 대상으로 중량, 건조비 등의 경제성을 비교 평가하였다. 다목적 함수로는 유조선의 중량과 건조비로 하였으며 최적화 기법으로는 확률론적 탐색법인 ES(Evolution Strategies)를 이용하였다. 건조비 모델은 상대 건조비 개념을 도입하였고, 종강도 부재는 선급규정에 의해, 횡강도 및 횡격벽 부재는 직접해석법인 일반화된 경사처짐법을 사용하여 설계에 적용하였다. 다목적함수 최적화 결과로부터 도출된 Pareto 최적 설계점들에 대하여, 요구운임률을 각각 산정함으로써 이들 최적 설계점들 중에서 가장 경제성이 뛰어난 선박 설계 방안을 제시하였다.

• 융합신호처리학회논문지
• /
• 제9권1호
• /
• pp.39-45
• /
• 2008

WDM 네트워크는 높은 전송속도와 낮은 지연시간으로 메트로폴리탄 네트워크뿐만 아니라 최근 기가비트 이더넷 등을 이용하여 근거리 망에서도 많은 연구가 진행되어 왔다. 네트워크의 성능은 네트워크 구조의 파라미터 값들과 사용되는 Medium Access Control 프로토콜의 파라미터 값들에 많이 의존한다. 또한 네트워크 효율성과 지연시간은 주로 상반된 관계를 보여 한쪽의 희생이 불가피 하였다. 네트워크를 효율적으로 운용하기 위해서는 효율성과 지연시간이라는 성능의 최적값을 찾아야 상황에 맞게 운용할 수 있다. 본 논문에서는 Arrayed Waveguide Grating (AWG) 기반의 성형 WDM 네트워크상에서 효율성의 최대화와 지연시간의 최소화라는 두 개의 서로 상반된 목적 함수를 유전자 알고리즘 기반의 방법론을 이용하여 파레토 최적화 곡선이라는 최적의 값들을 찾아내었다. 이를 이용하여 구한 최적의 네트워크 구성을 위한 파라미터 값들과 MAC 프로토콜의 파라미터 값들을 이용하여 상황에 따른 최적의 네트워크 성능을 유추할 수 있게 되었다. 본 논문에 사용된 유전자 알고리즘을 이용한 최적화 방법은 이와 유사한 상반된 목적 함수를 갖는 네트워크의 성능을 최적화하는데 사용필 수 있을 것이다.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1873-1881
• /
• 2014

This paper deals with the design of multi-machine power system stabilizers (PSSs) and Static var compensator (SVC) using Modified shuffled frog leaping algorithm (MSFLA). The effectiveness of the proposed scheme for optimal setting of the PSSs and SVC controllers has been attended. The PSSs and SVC controllers designing is converted to an optimization problem in which the speed deviations between generators are involved. In order to compare the capability of PSS and SVC, they are designed independently once, and in a coordinated mode once again. The proposed method is applied on a multi-machine power system under different operating conditions and disturbances to confirm the effectiveness of it. The results of tuned PSS controller based on MSFLA (MSFLAPSS) and tuned SVC controller based on MSFLA (MSFLA SVC) are compared with the Strength pareto evolutionary algorithm (SPEA) and Particle swarm optimization (PSO) based optimized PSS and SVC through some performance to reveal its strong performance.

• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.31-38
• /
• 2011

Optimization using a hybrid multi-objective evolutionary algorithm coupled with response surface approximation has been performed to improve the performance of a transonic axial compressor with circumferential casing grooves. In order to optimize the operating stability and peak adiabatic efficiency of the compressor with circumferential casing grooves, tip clearance, angle distribution at blade tip and the depth of the circumferential casing grooves are selected as design variables. Three-dimensional Reynolds-averaged Navier-Stokes equations with the shear stress transport turbulence model are discretized by finite volume approximations. The trade-off between two objectives with the interaction of blade and casing treatment is determined and discussed with respect to the representative clusters in the Pareto-optimal solutions compared to the axial compressor without the casing treatment.

• 한국시뮬레이션학회논문지
• /
• 제6권1호
• /
• pp.71-84
• /
• 1997

For many optimization problems where some of the system components are stochastic, the objective functions cannot be represented analytically. Therefore, modeling by computer simulation is one of the most effective means of studying such complex systems. Many, if not most, simulation optimization problems have multiple aspects. Historically, multiple aspects have been combined ad hoc to form a scalar objective function, usually through a linear combination (weighted sum) of the multiple attributes, or by turning objectives into constraints. The genetic algorithm (GA), however, is readily modified to deal with multiple aspects. In this paper we propose a MAGA (Multiple Aspects-based Genetic Algorithm) as an algorithm for finding the Pareto optimal set. We demonstrate its ability to find and maintain a diverse "Pareto optimal population" on two problems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.473-493
• /
• 2019

5G vehicular communication is one of key enablers in next generation intelligent transportation system (ITS), that require ultra-reliable and low latency communication (URLLC). To meet this requirement, a new hybrid vehicular network structure which supports both centralized network structure and distributed structure is proposed in this paper. Based on the proposed network structure, a new vehicular network utility model considering the latency and reliability in vehicular networks is developed based on Euclidean norm theory. Building on the Pareto improvement theory in economics, a vehicular network uplink optimization algorithm is proposed to optimize the uplink utility of vehicles on the roads. Simulation results show that the proposed scheme can significantly improve the uplink vehicular network utility in vehicular networks to meet the URLLC requirements.

• ETRI Journal
• /
• 제43권1호
• /
• pp.17-30
• /
• 2021

At present, multiple input multiple output radars offer accurate target detection and better target parameter estimation with higher resolution in high-speed wireless communication systems. This study focuses primarily on power allocation to improve the performance of radars owing to the sparsity of targets in the spatial velocity domain. First, the radars are clustered using the kernel fuzzy C-means algorithm. Next, cooperative and noncooperative clusters are extracted based on the distance measured using the kernel fuzzy C-means algorithm. The power is allocated to cooperative clusters using the Pareto optimality particle swarm optimization algorithm. In addition, the Nash equilibrium particle swarm optimization algorithm is used for allocating power in the noncooperative clusters. The process of allocating power to cooperative and noncooperative clusters reduces the overall transmission power of the radars. In the experimental section, the proposed method obtained the power consumption of 0.014 to 0.0119 at K = 2, M = 3 and K = 2, M = 3, which is better compared to the existing methodologies-generalized Nash game and cooperative and noncooperative game theory.

• Advances in Computational Design
• /
• 제8권2호
• /
• pp.179-190
• /
• 2023

In this paper, building information modelling (BIM) associated to the principle of significant items emerged at quantities and costs in the optimization of productivity related to the rehabilitation of the building where proposed and discussed. A quantitative and qualitative study related to the field of application based on some parameters such as pathology diagnosis, projects documents and bills of quantities were used for model development at the preliminary stage of this work. The study identified 14 quantities significant items specified to cost value based on the use of the 80/20 Pareto rule, through the integration of building information modelling (BIM) in the optimisation of labour productivity for rehabilitation of buildings. The results of this study reveal the reliability and the improvement of labour productivity using building information modelling process integrating quantities and cost significant items.

• Structural Engineering and Mechanics
• /
• 제43권6호
• /
• pp.771-794
• /
• 2012

This paper presents a multi-objective evolutionary algorithm for combinatorial optimisation and applied for design optimisation of fiber reinforced composite structures. The proposed algorithm closely follows the implementation of Pareto Archive Evolutionary strategy (PAES) proposed in the literature. The modifications suggested include a customized neighbourhood search algorithm in place of mutation operator to improve intensification mechanism and a cross over operator to improve diversification mechanism. Further, an external archive is maintained to collect the historical Pareto optimal solutions. The design constraints are handled in this paper by treating them as additional objectives. Numerical studies have been carried out by solving a hybrid fiber reinforced laminate composite cylindrical shell, stiffened composite cylindrical shell and pressure vessel with varied number of design objectives. The studies presented in this paper clearly indicate that well spread Pareto optimal solutions can be obtained employing the proposed algorithm.

• 한국산업정보학회논문지
• /
• 제16권4호
• /
• pp.119-125
• /
• 2011

The part family (PF) formation in a cellular manufacturing has been a key issue for the successful implementation of Group Technology (GT). Basically, a part has two different attributes; i.e., design and manufacturing. The respective similarity in both attributes is often conflicting each other. However, the two attributes should be taken into account appropriately in order for the PF to maximize the benefits of the GT implementation. This paper proposes a clustering algorithm which considers the two attributes simultaneously based on pareto optimal theory. The similarity in each attribute can be represented as two individual objective functions. Then, the resulting two objective functions are properly combined into a pareto fitness function which assigns a single fitness value to each solution based on the two objective functions. A GA is used to find the pareto optimal set of solutions based on the fitness function. A set of hypothetical parts are grouped using the proposed system. The results show that the proposed system is very promising in clustering with multiple objectives.