• Journal of fish pathology
• /
• v.28 no.3
• /
• pp.117-123
• /
• 2015

Economic loss by soft tunic syndrome of edible ascidian, Halocynthia roretzi has become a serious problem. Recently, it has discovered that the cause of this syndrome is infection by a protozoan parasite Azumiobodo hoyamushi. However, only a few studies have been conducted to control this parasitic disease. In a previous research, non-specific disinfectants have been found to be effective in controling the causative parasite. In an attempt to eradicate this causative parasite, organic acids were tested in this study to evaluate their in vitro and in vivo efficacy. In vitro tests showed that 8 different organic acids used in this study were moderately or highly effective with protozoan-killing effects ($EC_{50}=153{\sim}275{\mu}g/ml$). Despite weak in vivo penetration of organic acids into the tunic tissues, treatment with high concentration reduced the mortality of ascidian caused by infection the parasite, indicating that we might be able to develop a disinfection method using environmentally-friendly organic acids.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.635-639
• /
• 2016

In the devices used in the microwave frequency band, the gain decreases as the frequency increases due to the parasitic component. To compensate for these characteristics, a linear gain equalizer with an opposite slope is needed in wideband systems, such as those used for electronic warfare. In this study, a linear gain equalizer that can be used in the 18 ~ 40GHz band is designed and fabricated. Circuit design and momentum design (optimizations) were carried out to reduce the errors between design and manufacturing. A thin film process is used to minimize the parasitic components within the implementation frequency band. A sheet resistance of 100 ohm/square was employed to minimize the wavelength variation due to the length of the thin film resistor. This linear gain equalizer is a structure that combines a quarter wavelength-resonator on a series microstrip line with a resistor. All three 1/4 wavelength short resonators were used. The fabricated linear gain equalizer has a loss of more than -5dB at 40GHz and a 6dB slope in the 18 ~ 40GHz band. By using the manufactured gain equalizer in a multi-stage connected device such as an electronic warfare receiver, the gain flatness degradation with increasing frequency can be reduced.

• Korean journal of applied entomology
• /
• v.22 no.4 s.57
• /
• pp.251-261
• /
• 1983

Survey on soybean parasitic nematodes has been undertaken in order to get an ideas about the distribution of nemic fauna. Total 71 soil samples were collected from soybean fields in Gyeongbug and Chungbug provinces. Eighteen species belonging to fourteen different genera were found associated with soybean, Glycine max. The results were as follows: Aphelenchus avenae, Circonemoides informis, Ditylenchus dipsaci, Helicotylenchus pseudorobustus, Heterodera glycines, Hirschmanniella imamuri, Meloidogyne hapla, Meloidogyne incognita, Paratylenchus pandus, Pratylenchus thornei, Pratylenchus vulnus, Psilenchus hilarulus, Rotylenchus sp. Tylenchorhynchus clay toni, Tylenchorhynchus dubius, Tylenchorhynchus nudus, Tylenchus sp. Xiphinema americanum were found in soybean fields. In frequency of occurring nematodes by localities, soybean cyst nematode was higher in Chungbug by $70\%$, while $50\%$ in Gyeongbug. But rook-knot nematode was higher in Gyeongbug by $54.1\%$, while $19.1\%$ in Chungbug. In density of nematode, Heterodera was the most dominant as 200.4 populations per 100ml soil, Meloidogyne as 107.1 populations, Rotylenchus, Xiphinema, Aphelenchus in decreasing order. In survey of loss, density of soybean cyst nematode in heavily infested fields was 155 cysts per 100ml soil while 35 cysts in slightly infested fields. Seventy percent of soybean yields was decreased when comparing with average 64.2kg/10a in heavily infested fields and average 209.5kg/10a in slightly infested. Correlation coefficients among number of soybean cyst and yields, pod weight, number of pod was negative as r- 0.57, 0.47, 0.38 over all localities.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.1-15
• /
• 1987

This experiment was undertaken for the purpose of investigation of relative durability about thirty sorts of the korean native wood and nine sorts of the wood destroying fungi Polystictus versicolor, Irpex consors. Poria vaporaria, Merulius lacrymans, Schizophyllum commune, Trametes pini, Lenzites betulina, Paxillus panuoides by means of a laboratory methods. The results obtained are; (from the table 2 to 10) 1. By measuring the percentage of loss in weight with regard to Polystictus versicolor, the sap wood contained in Junipeus chinesis was calculated at 18.2%, therefore it is much higher durability than any others and the sap wood contained in Pinus densiflora was measured at 44.10%, therefore it is much lower durability than any others. 2. By measuring the percentage of loss in weight with regard to Irpex consors, the heart wood contained in Butula schmidtii was calculated at 1.23%, therefore durability is very high and the heart wood contained in Quercus dentata was calculated at 26.79%, therefore durability is very low. 3. By measuring the percentage of lass in weight with regard to Lenzites betulina, the heart wood contained in Betula schmidtii was calculated at 5.33%, therefore it is much higher durability than any others and the sap wood with regard to Abies holophylla was measured at 45.48%, therefore durability is very low. 4. By measuring the percentage of loss in weight with regard to Poria vaporaria, the sap wood contained in Fraxinus rhynchophylla was calculated at 5.57%, therefore durability is very high and the sap wood contained in Paulownia coreana was calculated at 35.6%, therefore it is much lower durability than any others. 5. By measuring the percentage of loss in weight with regard to Merulius lacrymans, the heart wood contained in Castanea crenata was measured at 0.09% and in the next place, the heart wood contained in Abies holophylla calculated at 0.15% did not decay almost and the sap wood contained in Cornus controversa was measured at 32.88%, therefore it is lower durability than any others. 6. By measuring the percentage of loss in weight with regard to Schizophyllum commune, the sap wood cantained in Junipensis chinensis was calculated at 1.09%, therefore durability is very high and the sap wood contained in Populus deltoides was calculated at 36.87%, it is much lower durability than any others. 7. By measuring the percentage of loss ill weight with regard to Trametes pini, the sap wood contained in Robinia pseudo-acacia was calculated at 1.33%, therefore durability is very high and the sap wood contained in Comus controversa was calculated at 33.19%, it is much lower durability than any others. 8. By measuring the percentage of loss ill weight with regard to Paxillus panuoides. the heart wood contained in Zelkova serrata was calculated at 1.73%, therefore durability is very high and the sap wood contained in Populus deltoides was calculated at 42.30%, therefore durability in very low. 9. By measuring the percentage of loss in weight with regard to Dardalea quercina, the heart wood contained in Castanea crenata was calculated at 0.92%, therefore durability is very high and the sap wood contained in Cornus controversa was calculated at 32.00% therefore durability is very low. The above results are summarized as follows 1. Durability between the heart wood and the soft wood find that it is nonsignificant, while durability is higher heart wood than sap wood. 2. Special sorts including in the element like Castanea cenata, Robinia pseudo-acacia, Juniperus chinensis and heart wood like Betula schmiditii and Styrax obasia are highly durable and soft wood like Cornus controversa, Populus davidiana, Salix koreensis, Celtis jessensis are lowly durable in general. 3. Among the wood destroying fungi Paxillus panuoides is highly durable and as follows. Poria vaporaria, Lenzites betulina and the Daedalea quercina is less in general and Irpex consors, Mersulius lacrymans are a middle degree.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.584-597
• /
• 2011

In this paper, low-loss and high-power RF SP6T switch chips are designed, fabricated and measured for GSM/EGSM/DCS/PCS applications using WIN Semiconductors 0.5 ${\mu}m$ pHEMT process. We utilized a combined configuration of series and series-shunt structures for optimized switch performance, and a common transistor structure on a receiver path for reducing chip area. The gate width and the number of stacked transistors are determined using ON/OFF input power level of the transceiver system. To improve the switch performance, feed-forward capacitors, shunt capacitors and parasitic FET inductance elimination due to resonance are actively used. The fabricated chip size is $1.2{\times}1.5\;mm^2$. S-parameter measurement shows an insertion loss of 0.5~1.2 dB and isolation of 28~36 dB. The fabricated SP6T switch chips can handle 4 W input power and suppress second and third harmonics by more than 75 dBc.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.73.1-73.1
• /
• 2010

For the successful cold starting of a fuel cell engine, either internal of external heat supply must be made to overcome the formation of ice from water below the freezing point of water. In the present study, switchable vanadium oxide compounds as variable temperature-electrical resistance materials onto the surface of flat metallic bipolar plates have been prepared by a dip-coating technique via an aqueous sol-gel method. Subsequently, the chemical composition and micro-structure of the polycrystalline solid thin films were analyzed by X-ray diffraction, X-ray fluorescence spectroscopy, and field emission scanning electron microscopy. In addition, it was carefully measured electrical resistance hysteresis loop over a temperature range from $-20^{\circ}C$ to $80^{\circ}C$ using the four-point probe method. The experimental results revealed that the thin films was mainly composed of Karelianite $V_2O_3$ which acts as negative temperature coefficient materials. Also, it was found that thermal dissipation rate of the vanadium oxide thin films partially satisfy about 50% saving of the substantial amount of energy required for ice melting at $-20^{\circ}C$. Moreover, electrical resistances of the vanadium-based materials converge on an extremely small value similar to that of pure flat metallic bipolar plates at higher temperature, i.e. $T{\geq}40^{\circ}C$. As a consequence, experimental studies proved that it is possible to apply the variable temperature-electrical resistance material based on vanadium oxides for the cold starting enhancement of a fuel cell vehicle and minimize parasitic power loss and eliminate any necessity for external equipment for heat supply in freezing conditions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.364-371
• /
• 2007

In this paper, the design and implementation of high-power PIN diode switch modules and high-speed switch driver circuits are presented for Wibro base stations. To prevent isolation degradation due to parasitic inductances of conventional packaged PIN diodes and to improve power handling capabilities of the switch modules, bare diode chips are used and carefully placed in a PCB layout, which makes bonding wire inductances to be absorbed in the impedance of a transmission line. The switch module is designed and implemented to have a maximum performance while using a minimum number of the diodes. It shows an insertion loss of ${\sim}0.84\;dB$ and isolation of 80 dB or more at 2.35 GHz. The switch driver circuit is also fabricated and measured to have a switching speed of ${\sim}200\;nsec$. The power handling capability test demonstrates that the module operates normally even under a digitally modulated 70 W RF signal stress.

• Journal of Embryo Transfer
• /
• v.26 no.1
• /
• pp.53-56
• /
• 2011

Infertility of the pig is directly affects on economic loss and failure of the embryo transfer. In the present case report, we show one rare case of porcine infertility resulted from oviductal obstruction. A gilt showing normal heat behaviors was selected as a recipient of embryo transfer. During the laparotomy surgery, abnormality of the reproductive tract was founded. Several large sized cyst-like structures were founded on infundibulum and body of uterus. Severe enlargement of oviduct represents that obstruction of the oviduct. Sign of fibrosis on the surface of uterus and other internal organs revealed that the obstruction was come arise from prior peritonitis. Mild neutropenia and elevated number of monocytes, eosinophils and platelets in blood smear represent that the peritonitis might be due to chronic parasitic infection. Ovarian function was seems to be normal due to blood progesterone concentration was higher than basal level. The pig was culled because she cannot be recovered by surgical or hormonal treatment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.867-873
• /
• 2016

Even if ICS(Interference Cancellation System) repeater is used in wireless communication system, it has the disadvantage that it must have enough distance between Donor and Service antenna to be isolated. In this paper, new ICS repeater integrated antenna with high insolation characteristics is designed. The proposed antenna is fabricated for 800MHz and measured. Bandwidth and gain are optimized by changing the stub lengths near main patch and power divider, and also by changing the size of parasitic patch. The fabricated antenna has a return loss less than -13 dB, a gain over 3 dBi, and an isolation between the donor and the server antennas less than -56 dB from 824~894 MHz for CDMA mobile communication. Therefore, the proposed antenna structure can be applied to eliminate the shadow area and to expand the coverage area for any other wireless communication bands.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1511_1512
• /
• 2009

This paper presents a polarization switching antenna integrated with silicon RF MEMS SPDT switches in the form of a package. A low-loss quartz substrate made of SoQ (silicon-on-quartz) bonding is used as a dielectric material of the patch antenna, as well as a packaging lid substrate of RF MEMS switches. The packaging/antenna substrate is bonded with the bottom substrate including feeding lines and RF MEMS switches by BCB adhesive bonding, and RF energy is transmitted from signal lines to antenna by slot coupling. Through this approach, fabrication complexity and degradation of RF performances of the antenna due to the parasitic effects, which are all caused from the packaging methods, can be reduced. This structure is expected to be used as a platform for reconfigurable antennas with RF MEMS tunable components. A linear polarization switching antenna operating at 19 GHz is manufactured based on the proposed method, and the fabrication process is carefully described. The s-parameters of the fabricated antenna at each state are measured to evaluate the antenna performance.